更新/管理マニュアル Motherboard BIOS
J13571 改訂版 V4 2017年10月 Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved. 本書およびそれに付属する製品は著作権法により保護されており、その使用、複製、頒布および逆コ ンパイルを制限するライセンスのもとにおいて頒布されます。購入者によるバックアップ目的の場合 を除き、ASUSTeK Computer Inc.
もくじ Chapter 1: 1.1 1.2 ASUS EZ Flash 2 Utility.........................................................................6 ASUS EZ Flash 3 Utility.........................................................................7 Chapter 2: 2.1 2.2 GUI モード Legacy モード ASUS EZ Flash Utility............................................................................8 BIOS Updater (Bupdater Utility).........................................................
BIOS 更新/管理 本書ではBIOSの更新方法および管理方法について説明しています。BIOSの更新により、システム の安定性、互換性、パフォーマンスの向上が期待できます。ただし、BIOSの更新には常にリスクが 伴います。使用上、現在の状態で特に問題がない場合はBIOSの更新を行わないでください。不適 切な更新はシステムが起動しない、または不安定になるといった問題の原因となります。BIOSの 更新が必要な場合は、本書に記載の指示に従い、慎重に行なってください。 • 最新のBIOSイメージファイルはASUSオフィシャルサイトからダウンロードすることができ ます。(http://www.asus.
ASUS CrashFree BIOS 3 ASUS CrashFree BIOS 3 はBIOSを復旧することができるツールです。更新時などに破損したBIOS をサポートDVDまたはUSBメモリーを使用して復旧することができます。 • 最新のBIOSイメージファイルは、ASUSオフィシャルサイト(http://www.asus.com)から ダウンロードすることができます。 • USBメモリーで本機能を使用する際は、USBメモリーに保存したBIOSイメージファイル名 を製品固有のファイル名に変更する必要があります。詳しくは各製品のユーザーマニュア ルをご確認ください。 BIOSを復旧する 手順 1. BIOSイメージファイルを保存したUSBメモリーまたはサポートDVDをシステムにセットします。 2. システムの電源をオンにします。 3. USBメモリーまたはサポートDVDのBIOSイメージファイルが検出されると、BIOSイメージ ファイルを読み込み自動的にBIOSの復旧を開始します。 4.
Chapter 1: 1.1 GUI モード ASUS EZ Flash 2 Utility ASUS EZ Flash 2 Utilityは、OSベースのユーティリティを起動することなくUEFI BIOSを短時間で更 新することができます。 安全性及び信頼性を確保するため、BIOSの設定を初期設定値に戻してから更新を 行なってください。 手順 6 1. BIOSイメージファイルを保存したUSBメモリーをシステムにセットします。 2. UEFI BIOS UtilityのAdvanced Mode を起動し、Tool メニューから「ASUS EZ Flash 2 Utility」を起動します。 3. DriveフィールドでBIOSイメージファイルが保存されているUSBメモリーを選択し を押します。 4. Folderフィールドで更新に使用するBIOSイメージファイルを選択しを押します。 5. 読み込まれたBIOSイメージファイルが正しいことを確認し、UEFI BIOSの更新を開始します。 6.
1.2 ASUS EZ Flash 3 Utility ASUS EZ Flash 3 Utilityは、OSベースのユーティリティを起動することなくUEFI BIOSを短時間で更 新することができます。 ・ 安全性及び信頼性を確保するため、BIOSの設定を初期設定値に戻してから更新を行なっ てください。 ・ インターネットアップデートは、国や地域によっては利用できない場合があります。ご利用 可能地域であっても、お客様の回線契約内容によってはご利用いただけない場合があり ます。予めご了承ください。 USBメモリーを使用してUEFI BIOSを更新する手順 1. BIOSイメージファイルを保存したUSBメモリーをシステムにセットします。 2. UEFI BIOS UtilityのAdvanced Mode を起動し、Tool メニューから「ASUS EZ Flash 3 Utility」を起動します。 3. 「via Storage Devices(s)」を選択します。 4.
Chapter 2: 2.1 Legacy モード ASUS EZ Flash Utility ASUS EZ Flash Utilityは、OSベースのユーティリティを起動することなくBIOSを短時間で更新する ことができます。 安全性及び信頼性を確保するため、BIOSの設定を初期設定値に戻してから更新を行なってく ださい。 手順 1. BIOSイメージファイルを保存したUSBメモリーをシステムにセットします。 2. BIOS Setup Utility の Tool メニューから「Start EzFlash」を起動します。 Main Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc. Ai Tweaker Advanced Monitor Boot Tool Exit Press ENTER to run the utility to select and update BIOS. Start EzFlash 8 3.
2.2 BIOS Updater (Bupdater Utility) BIOS Updater (Bupdater Utility) では、DOS環境からBIOSを更新することができます。 更新の前に 1. サポートDVDとFAT32/16 ファイルシステムをもつ、シングルパーティションのUSBメモリー を手元に準備します。 2. 最新のBIOSイメージファイルとBIOS Updater をASUSオフィシャルサイトからダウンロードし、USB メモリーに保存します。 (http://www.asus.com) • DOS環境ではNTFSはサポートしていません。BIOSイメージファイルとBIOS Updaterは、 必ずFAT32/16ファイルシステムのUSBメモリーに保存してください。 • DOS環境では、マウス操作を行なうことはできません。キーボードをご使用ください。 3. コンピューターをシャットダウンします。 4. コンピューターに光学ドライブを接続します。 DOS環境でシステムを起動する 1.
5. FreeDOSプロンプトで「d:」 と入力した後 を押してドライブをDrive C(光学ドライ ブ)からDrive D(USBメモリー)へ移動します。システムに他のストレージデバイスが接続さ れている場合、 ドライブパスが異なる場合があります。 Welcome to FreeDOS (http://www.freedos.org)! C:/> d: D:/> BIOSを更新する 手順 1. FreeDOSプロンプトで、 「bupdater /g」 と入力し、を押します。 D:/> bupdater /g 2. BIOS Updaterが起動し、次のような画面が表示されます。 ASUSTeK BIOS Updater for DOS V1.31 [2014/01/01] Current ROM BOARD: B150-PLUS VER: 0303 (H :00 B :00) DATE: 09/21/2015 PATH: ドライバ パネル Update ROM BOARD: Unknown VER: Unknown DATE: Unknown C:\ C: D:
5. 確認画面で「Yes」を選択し更新を実行します。 6.