LED-projector E-handleiding B1M
DU7777 April 2013 Eerste editie COPYRIGHT EN GARANTIE-INFORMATIE Geen enkel deel van deze handleiding, met inbegrip van de producten en de software die hierin is beschreven, mag zonder de uitdrukkelijke schriftelijke toestemming van ASUSTeK COMPUTER INC. (“ASUS”) worden gereproduceerd, verzonden, getranscribeerd, opgeslagen in een retrievalsysteem of in enige taal worden vertaald in enige vorm of door enig middel, behalve documentatie die door de koper wordt gebruikt voor back-updoeleinden.
Inhoudsopgave Over deze handleiding...................................................................................... 5 In deze handleiding gebruikte conventies.............................................. 6 Typografie............................................................................................................ 6 Meertalige versies............................................................................................. 6 Veiligheidsmaatregelen.........................................
Hoofdstuk 3: Het OSD-menu gebruiken Programma's starten vanaf het OSD-menu.............................................34 Raster bedieningspaneel..............................................................................35 De LED-projector voor de eerste keer gebruiken..................................36 De instellingen van uw LED-projector openen......................................38 De demomodus gebruiken...........................................................................
Over deze handleiding Deze handleiding biedt informatie over de hardware- en softwarefuncties van uw LED-projector, geordend in de volgende hoofdstukken: Hoofdstuk 1: Kennismaken met uw LED-projector Dit hoofdstuk beschrijft de onderdelen van uw LED-projector en de bijgeleverde afstandsbediening. Hoofdstuk 2: Instelling Dit hoofdstuk toont u hoe u uw LED-projector kunt installeren en de onderdelen ervan kunt gebruiken voor het aansluiten op invoerapparaten.
In deze handleiding gebruikte conventies Om belangrijke informatie in deze handleiding te markeren, worden berichten als volgt voorgesteld: BELANGRIJK! Dit bericht bevat essentiële informatie die moet worden opgevolgd om een taak te voltooien. OPMERKING: dit bericht bevat aanvullende informatie en tips die kunnen helpen bij het voltooien van taken.
Veiligheidsmaatregelen Uw LED-projector gebruiken • Raadpleeg de handleiding en houd rekening met de veiligheidsinstructies voordat u uw LED-projector gebruikt. • Volg de opmerkingen en waarschuwingen die in de handleiding zijn vermeld. • Plaats uw LED-projector niet op een oneffen of onstabiel oppervlak. • Gebruik de LED-projector niet in een rokerige omgeving. Er kunnen rookresten worden opgestapeld op kritieke onderdelen en de LED-projector beschadigen of de prestaties negatief beïnvloeden.
Zorg dragen voor uw LED-projector • Schakel de LED-projector uit en koppel deze los van het stopcontact voordat u het apparaat schoonmaakt. • Wanneer u de behuizing van de LED-projector schoonmaakt, moet u gebruik maken van een schone zachte doek, bevochtigd met water of een mengsel van water en een neutraal schoonmaakproduct. Veeg het apparaat droog met een zachte droge doek. • Controleer of de lens afgekoeld is voordat u deze reinigt. Veeg de lens voorzichtig schoon met lensreinigingspapier.
Hoofdstuk 1: Kennismaken met uw LED-projector E-handleiding LED-projector
Eigenschappen Bovenaanzicht Scherpstelring Met de scherpstelring kunt u de beeldfocus van uw LEDprojector aanpassen.
Bedieningspaneelknoppen Via de knoppen op het bedieningspaneel kunt u navigeren door het OSD-menu. Deze knoppen komen individueel ook overeen met een specifieke LED-projectorinstelling, zoals hieronder aangeduid.
Vooraanzicht Ventilatieopeningen Dankzij de ventilatieopeningen kan er koele lucht in en warme lucht uit de LED-projector stromen. WAARSCHUWING! Zorg ervoor dat de ventilatieopeningen niet geblokkeerd worden door papier, boeken, kleding, kabels of andere objecten, anders kan het apparaat oververhitten. AV-IN Lens De lens projecteert video- of afbeeldingsbestanden op het scherm vanaf uw invoerapparaat. WAARSCHUWING! Raak de lens niet aan met uw handen of een scherp object.
Achteraanzicht AV-IN Infraroodsensor (IR) De IR-sensor detecteert het signaal van de afstandsbediening van uw LED-projector. Hierdoor kunt u van op een afstand tot 7 meter en een ontvangsthoek van 15 graden toegang tot het bedieningspaneel van uw LED-projector. Audio-uitgang Via de audio-uitgang kunt u uw LED-projector aansluiten op de luidsprekers met versterker of op de hoofdtelefoon.
HDMI-poort Deze poort is voor de HDMI-aansluiting (High-Definition Multimedia Interface) en is HDCP-compatibel voor HD DVD, Blu-ray en andere beschermde inhoudsweergave. VGA-poort Via deze poort kunt u uw LED-projector aansluiten op andere VGA-compatibele apparaten. USB 2.0-poort De USB 2.0-poort (Universal Serial Bus 2.0) is compatibel met USB 2.0- of USB 1.1-apparaten.
Rechterkant Kensington®-beveiligingssleuf Met de Kensington®-beveiligingssleuf kunt u uw LEDprojector beveiligen met behulp van Kensington®-compatibele beveiligingsproducten. Ventilatieopeningen 120 Dankzij de ventilatieopeningen kan er koele lucht in en warme lucht uit de LED-projector stromen. o WAARSCHUWING! Zorg ervoor dat de ventilatieopeningen niet geblokkeerd worden door papier, boeken, kleding, kabels of andere objecten, anders kan het apparaat oververhitten.
Linkerkant Gelijkstroomingang (DC) Sluit de bijgeleverde voedingsadapter aan op deze poort om uw batterijdoos op te laden en uw LED-projector van stroom te voorzien. AV-IN WAARSCHUWING! De adapter kan warm tot heet worden tijdens het gebruik. Zorg ervoor dat u de adapter niet afdekt en houd deze weg van uw lichaam terwijl de adapter is aangesloten op een stroombron. Ventilatieopeningen Dankzij de ventilatieopeningen kan er koele lucht in en warme lucht uit de LED-projector stromen.
Onderaanzicht Ingebouwde voet Deze LED-projector is voorzien van een ingebouwde voet waarmee u de hoogte van de projector kunt afstellen met 5 of 9,5 graden. Statiefbevestiging Sluit de LED-projector aan op een statief met deze voet.
Afstandsbediening LED-projector Bedieningspaneelknoppen Via de knoppen op het bedieningspaneel kunt u navigeren door het OSD-menu. Deze knoppen komen individueel ook overeen met een specifieke LED-projectorinstelling. OPMERKING: raadpleeg het hoofdstuk Het OSD-menu gebruiken in deze handleiding voor meer informatie over het gebruik van de knoppen op het bedieningspaneel.
De batterij vervangen A. Schuif het veerslot van het batterijvak naar rechts om de batterijhouder te ontgrendelen. B. Trek de batterijhouder omlaag en verwijder deze volledig uit het batterijvak.
C. Verwijder de oude batterij en plaats vervolgens de nieuwe CR2025 lithium-celbatterij in de batterijhouder met de positieve zijde (+) omhoog gericht. D. Schuif de batterijhouder terug in het batterijvak. Duw deze helemaal naar binnen tot u een zachte klik hoort waarmee wordt aangegeven dat het batterijvak terug op zijn plaats is vergrendeld.
Hoofdstuk 2: Instelling AV-IN E-handleiding LED-projector 21
Uw LED-projector bedienen Met deze draagbare LED-projector kunt u uw apparaten gewoon aansluiten zodat u gemakkelijke multimediabestanden kunt openen, audio direct via de ingebouwde SonicMaster-luidsprekers kunt horen en op het scherm projecteren via wifi. Voor uw veiligheid en om de kwaliteit van dit toestel te behouden, dient u de volgende stappen te volgen bij het bedienen van uw LEDprojector. 1. De LED-projector aansluiten op de voedingsadapter. A. Sluit het AC/DC-kabel aan op de voedingsadapter. B.
Vereisten voor de voedingskabel Gebruik de juiste wisselstroomstekker volgens uw huidige locatie. BELANGRIJK! Neem contact op met uw verkoper als de wisselstroomkabel die bij uw LED-projector is geleverd, niet overeenkomt met uw lokale voedingsbron. OPMERKING: Wij raden u sterk aan een videobron te gebruiken die ook is uitgerust met een stekker met aarding om signaalstoringen door spanningsschommelingen te voorkomen. voor Australië en het vasteland van China voor de V.S.
2. De LED-projector aansluiten op uw apparaat. A.
AV-IN B. Audio/video-ingang AV-IN AV-IN OPMERKING: Raadpleeg de onderstaande tabel voor de pen die moet worden aangesloten op de AV-IN-poort.
C. SD/SDHC AV-IN AV-IN OPMERKING: Raadpleeg het hoofdstuk Het mediacentrum starten voor meer informatie over het starten van bestanden vanaf een geheugenkaart. D.
E.
F. USB 2.0 AV-IN Compatibele USB 2.0-ingangen: USB-kabel flashstation Wifi-dongle OPMERKING: Raadpleeg het hoofdstuk Het mediacentrum starten in deze handleiding voor meer informatie over het gebruikt van de USB 2.0-poort voor het starten van de ondersteunde bestandsindelingen.
3. De hoogte van de LED-projector aanpassen. Uw LED-projector wordt geleverd met een ingebouwde voet waarmee u de beeldhoogte op het scherm kunt aanpassen. WAARSCHUWING! Zorg ervoor dat de ingebouwde voet volledig is ingetrokken voordat u de LED-projector in de projectortas stopt. OPMERKINGEN: • Plaats de LED-projector op een stabiel, effen oppervlak. • Behoud een afstand van 30 cm of meer tussen de zijkanten van de LED-projector.
Tabel met schermgrootten en projectieafstand Stel de afstand van de LED-projector tot het scherm in volgens de onderstaande tabel.
4. Druk op de voedingsknop.
5. Pas de beeldfocus aan. Verplaats de scherpstelring naar links of rechts om de beeldfocus aan te passen. OPMERKING: Gebruik een stilstaand beeld wanneer u de weergave op het scherm aanpast.
Hoofdstuk 3: Het OSD-menu gebruiken E-handleiding LED-projector 33
OPMERKING: De volgende schermopnamen zijn uitsluitend bedoeld als referentie en kunnen worden bijgewerkt zonder voorafgaande kennisgeving. Programma's starten vanaf het OSD-menu Het OSD-menu bevat een reeks programma's en instellingen, ontworpen om uw gebruik van de LED-projector te maximaliseren. U kunt binnen het OSD-menu navigeren met de knoppen op het bedieningspaneel van uw LED-projector of met de bijgeleverde afstandsbediening.
Raster bedieningspaneel Het raster van het bedieningspaneel begeleidt u bij het gebruik van de knoppen op het bedieningspaneel om actieve opties in uw OSDmenu te starten. Het raster van het bedieningspaneel stelt 8 knoppen voor die rond de knop op het bedieningspaneel staan.
De LED-projector voor de eerste keer gebruiken Raadpleeg de volgende stappen wanneer u uw LED-projector voor de eerste keer gebruikt. 1. Installeer uw LED-projector en druk twee keer op de voedingsknop. Het ASUS-welkomstscherm verschijnt om aan te geven dat de LED-projector nu is ingeschakeld. 2. Selecteer de taal die u wilt gebruiken in uw LED-projector met de knoppen op het bedieningspaneel. 3.
Uit- Deze optie schakelt het bekijken van demovideo's op uw LED-projector uit en gaat verder met het zoeken van aangesloten invoerapparaten. BELANGRIJK! Deze optie deactiveert het raster van het bedieningspaneel in de demomodus en start in plaats daarvan het raster van het invoerbedieningspaneel wanneer u de LED-projector inschakelt. OPMERKING: Raadpleeg het hoofdstuk De demomodus gebruiken in deze handleiding voor meer informatie over de functies van de demomodus. 4.
De instellingen van uw LED-projector openen Naast het gebruik van de knoppen op het bedieningspaneel om door het OSD-menu te navigeren, kunt u ook elk van deze knoppen gebruiken om de volgende LED-projectorinstellingen te starten: BELANGRIJK! Druk op Projectorinstelling op het raster van het bedieningspaneel om deze functies te gebruiken in het mediacentrum. Voeding Druk op deze knop om de LED-projector in of uit te schakelen.
Contrast Druk op deze knop om het verschil in te stellen tussen het helderder of donkerder maken van uw projectie op het scherm. Mediacentrum Druk op deze knop om het mediacentrum te starten. OPMERKING: Raadpleeg het hoofdstuk Het mediacentrum gebruiken in deze handleiding voor meer details. Ingang Druk op deze knop om de apparaten die op uw LED-projector zijn aangesloten, te zoeken.
Splendid Druk op deze knop om een van de volgende weergavemodi te activeren: Standaard, Zwart bord, Wit bord, Dynamisch, sRGB, Bioscoop, Landschap.
Beeldinstelling Druk op deze knop om toegang te krijgen tot de volgende beeldinstellingen: OPMERKING: De beschikbare opties onder Beeldinstelling schakelt tussen de VGA- en Composiet-bron. • Kleurtemperatuur - Met deze optie kunt u de lichttemperatuur van uw LED-projector aanpassen volgens de onderstaande opties: Laag/ Gemiddeld, Hoog. • Kleuraanpassing - Met deze optie kunt u de kleur van uw scherm aanpassen volgens de onderstaande opties: Auto, RGB, YUV.
Beeld-positie Druk op deze knop om toegang te krijgen tot de volgende instellingen voor de beeldpositie: • Auto Keystone - Met deze optie kunt u de uitlijning van uw beeld automatisch afstellen. • Horizontale positie - Met deze optie kunt u de positie van het beeld horizontaal verschuiven. • Projector positie - Met deze optie kunt u de positie van het geprojecteerde beeld aanpassen op basis van de locatie van uw LED-projector.
• Fase - Met deze optie kunt u het aantal lijnen dat wordt uitgezonden door het computersignaal aanpassen, zodat de LED-projector overeenkomt met het computersignaal. • Opsporen - Met deze optie kunt u de frequentie van de LEDprojector aanpassen volgens de computer.
Setup Druk op deze knop om toegang te krijgen tot de volgende instellingen van de LED-projector: • Info - Deze optie toont u de volgende informatie over uw LED-projector: de momenteel gebruikte ingangspoort, de modelnaam van de LED-projector, en de momenteel gebruikte Splendid-modus. • Alles resetten - Met deze optie kunt u alle instellingen die u momenteel hebt ingesteld voor uw LED-projector, opnieuw instellen.
• Time-out voeding - Met deze optie kunt u het aantal seconden instellen voordat uw LED-projector automatisch uitschakelt wanneer deze niet in gebruik is. • Demomodus - Deze optie schakelt de functies van de demovideo van uw LED-projector in of uit. OPMERKING: Raadpleeg het hoofdstuk De demomodus gebruiken in deze handleiding voor meer details.
De demomodus gebruiken Geef de interne demovideo die bij uw LED-projector is geleverd of uw eigen demovideo's weer met de demomodus. De demomodus wordt automatisch ingeschakeld op uw LEDprojector als u Aan hebt gekozen op het ogenblik waarop u het apparaat voor de eerste keer hebt ingeschakeld. Als u echter Uit kiest, wordt deze functie uitgeschakeld. In dit geval kunt u deze functie inschakelen met de volgende stappen. De demomodus inschakelen 1. Start het raster Setup van het bedieningspaneel. 2.
Uw eigen demovideo maken en afspelen Met uw LED-projector kunt u eenvoudige demovideo's maken met een reeks foto's, voorgesteld als een diavoorstelling. U kunt ook achtergrondmuziek toevoegen aan de diavoorstelling terwijl deze op het scherm wordt weergegeven. Maak uw eigen demovideo en speel deze af op uw LED-projector met de volgende stappen: 1. Maak een map met de naam ASUS in uw SD-kaart of USBstation. 2. Selecteer de foto's die u wilt opnemen in uw demovideo en een muziekbestand (optioneel).
Het mediacentrum gebruiken Geef foto's weer, speel video's af, beluister muziek en bekijk documenten via het Mediacentrum van uw LED-projector. Via het mediacentrum krijgt u ook toegang tot de wifi-mogelijkheden van uw LED-projector en kunt u aansluitingen maken op invoerapparaten met USB-ondersteuning. Het mediacentrum starten Het mediacentrum wordt automatisch gestart nadat de LEDprojector een SD-kaart, extern station of wifi-dongleaansluiting detecteert.
Bestanden openen vanaf de SD-kaart of het USBstation Foto Ondersteunde beeldbestandsindelingen: • JPG • JPEG • BMP (bitmap) Een beeldbestand openen: 1. Sluit uw invoerapparaat aan op de LED-projector. 2. Schakel de LED-projector in om het OSD-menu van het mediacentrum te starten. 3. Selecteer het invoerapparaat waarvoor u toegang wenst. 4. Selecteer Foto. 5. Raadpleeg het raster van het bedieningspaneel om u te helpen bij het zoeken en selecteren van het bestand vanaf uw invoerapparaat. 6.
Video Bestandstype Videocodec Resolutie Bitsnelheid Beeldsnelheid Audiocodec Opmerkingen AVI MKV DIVX DIVX4/5/6 XVID MPEG-2/4 H. 264 M-JPEG WMV3 1080P 280 Mbps 30 fps AC3 Geen DTS ondersteuning MPEG1/2/3 VC-1 AP PCM ADPCM H. AAC 264-ondersteuning van minder dan 4 referentieframes AC3 H. AAC 264-ondersteuning MPEG1/2/3 van minder dan 4 DTS referentieframes LPCM TS MPEG-2 H.
Een videobestand afspelen: 1. Sluit uw invoerapparaat aan op de LED-projector. 2. Schakel de LED-projector in om het OSD-menu van het mediacentrum te starten. 3. Selecteer het invoerapparaat waarvoor u toegang wenst. 4. Selecteer Video. 5. Raadpleeg het raster van het bedieningspaneel om u te helpen bij het zoeken en selecteren van het bestand vanaf uw invoerapparaat. 6. Druk op om de geselecteerde map of het geselecteerde bestand te openen. 7.
Audio Bestandstype Bemonsteringsfrequentie (KHz) Bitsnelheid (Kbps) MP1/ MP2/ MP3 8-48 8—320 WMA 22-48 5—320 OGG ADPCM-WAV PCM-WAV AAC 8-48 8-48 8-48 8-48 64—320 32—384 128—1536 8—256 Om audiobestanden af te spelen, gaat u als volgt te werk: 1. Sluit uw apparaat aan op de LED-projector. 2. Schakel de LED-projector in om het OSD-menu van het mediacentrum te starten. 3. Selecteer het invoerapparaat waarvoor u toegang wenst. 4. Selecteer Muziek. 5.
Document Bestandstype Ondersteuningsversie Beperking pagina's/lijnen Tot 100 pagina's (één bestand) Groottebeperking Opmerking Tot 75 MB - Adobe PDF PDF 1.0 PDF 1.1 PDF 1.2 PDF 1.3 PDF 1.4 Microsoft® Office Word Microsoft® Office Word 1995, Microsoft® Office Word 1997, Microsoft® Office Word 2000, Microsoft® Office Word 2002, Microsoft® Office Word 2003 Omdat de Officeviewer niet alle pagina's van een Microsoft® Wordbestand tegelijk laadt, zijn er geen duidelijke grenzen van pagina's of lijnen.
Om bestanden weer te geven, gaat u als volgt te werk: 1. Sluit uw apparaat aan op de LED-projector. 2. Schakel de LED-projector in om het OSD-menu van het mediacentrum te starten. 3. Selecteer het invoerapparaat waarvoor u toegang wenst. 4. Selecteer Document. 5. Raadpleeg het raster van het bedieningspaneel om u te helpen bij het zoeken en selecteren van het bestand vanaf uw invoerapparaat. Indrukken 6. Druk op om de geselecteerde map of het geselecteerde bestand te openen. 7.
Ezlink Met deze functie kunt u projecteren vanaf invoerapparaten, zoals laptops en desktopcomputers, met een USB-kabel. Om bestanden te projecteren met Ezlink, moet u EZ Display installeren in het besturingssysteem van uw invoerapparaat. Voor Windows®: 1. Sluit uw telefoon aan op de pc met een USB-kabel. 2. Schakel uw invoerapparaat in en en ga naar Deze computer. 3. Selecteer EZ Display> EZ_USB_installer.
Ezlink gebruiken om te projecteren vanaf uw invoerapparaat 1. Schakel uw invoerapparaat in en sluit dat vervolgens aan op de LED-projector met een USB-kabel. 2. Schakel de LED-projector in. Als het mediacentrum niet automatisch wordt gestart, drukt u op het bedieningspaneel op . 3. Selecteer EzLink. Wacht tot het USB-pictogram op het scherm verschijnt om te controleren of de LED-projector goed is aangesloten op uw invoerapparaat. 4.
WiFi Met deze functie kunt u een draadloze verbinding maken met uw LED-projector vanaf invoerapparaten die zijn uitgerust met wificapaciteiten, zoals laptops en mobiele telefoons. BELANGRIJK! Er is een wifi-dongle vereist om deze functie in te schakelen. ASUS WiFi Projection installeren U moet de software ASUS WiFi Projection installeren om te projecteren vanaf uw invoerapparaat met WiFi.
4. Download de software ASUS WiFi Projection van het IP-adres door op een van de volgende pictogrammen te klikken. OPMERKING: De software ASUS WiFi projection is compatibel met Windows® 7, Windows® XP, Windows® Vista, en Mac® OS X. De lijst van compatibele besturingssystemen is onderhevig aan wijzigingen zonder voorafgaande kennisgeving.
Display via de AP-modus gebruiken Met deze modus kunt u een één-op-één-verbinding maken tussen uw invoerapparaat en uw LED-projector. 1. Sluit de wifi-dongle aan op uw LED-projector om het mediacentrum te starten. OPMERKING: Als het mediacentrum niet automatisch start, drukt u op en selecteert u vervolgens WiFi>Display via AP-modus. 2. Schakel de WiFi-verbinding in uw invoerapparaat in. Selecteer ASUS B1 (standaard SSID) of de nieuwe SSID die u hebt geconfigureerd voor de B1M LED-projector.
Display via client-modus gebruiken Met deze modus kunt u uw LED-projector verbinden met een andere wifi-hotspot om groepstoegang in te schakelen wanneer u de LED-projector gebruikt. 1. Sluit de wifi-dongle aan op uw LED-projector om het mediacentrum te starten. OPMERKING: Als het mediacentrum niet automatisch start, drukt u op en selecteert u vervolgens WiFi. 2. Selecteer Display via client-modus. 3.
4. Druk op om het toetsenbord van het OSD-menu te starten. Raadpleeg het raster van het bedieningspaneel wanneer u navigeert door het toetsenbord om het wachtwoord van de wifi-hotspot in te voeren en druk vervolgens op Enter. OPMERKING: De B1M LED-projector ondersteunt WPA/WPA2apparaten. 5. Druk op OK om de wifi-verbinding te starten tussen de wifihotspot en uw LED-projector. 6. Herhaal dezelfde stappen onder Display via AP-modus gebruiken om invoerapparaten aan te sluiten op de LED-projector.
Meertalige versies Download andere taalversies van deze E-handleiding via deze website: http://support.asus.
Bijlagen E-handleiding LED-projector 63
FCC-verklaring (Federal Communications Commission) Dit apparaat werd getest en voldoet aan de beperkingen voor een klasse B digitaal apparaat, in naleving van deel 15 van de FCC-voorschriften. Deze limieten zijn vastgesteld om een redelijke beveiliging te bieden tegen schadelijke storingen in een thuis installatie.
Verklaring Canadees Ministerie voor Communicatie Dit digitaal apparaat overschrijdt de limieten niet van Klasse B voor zendruisemissies van digitale apparaten , zoals vastgesteld in de voorschriften met betrekking tot radiostoring van het Canadese ministerie voor Communicatie. Dit digitaal apparaat van Klasse B voldoet aan de Canadese ICES-003.
Specificaties voor B1M LED-projector Beeldscherm Projectielens Beeldschermtechnologie Lichtbron Levensduur lichtbron Ware resolutie (oorspronkelijk) Lichtuitgang Contrastverhouding (standaard) Kleurverzadiging (NTSC) Schermkleuren 0,45” DLP® R/G/B-LED 30.
Voeding Inschakelmodus ≤65W(Ecomodus)/ ≤85W(Normale modus) Stand-bymodus <0,5W Geluidsniveau Normale modus: 32dBA - 34dBA Lawaai Ecomodus: 28dBA - 30dBA� Ingang/ Uitgang Pc-signaalingang D-sub, HDMI1.3 (HDCP-ondersteuning) Video-ingang Composiet Video Audio-uitgang Oortelefoonuitgang Kaartlezer Ja (1x SDkaartsleuf voor multimediaweergave) USB 2.
Mechanisch Kleuren van de design behuizing Statiefbevestiging Ondersteunende voet Knoppen op machine Zwart Bedrijfsvochtigheid 20 ~ 90% Accessoires draagtas, voedingsadapter, voedingskabel, D-subkabel, Beknopte handleiding, afstandsbediening, WiFidongle (in specifieke landen), garantiekaart Goedkeuringen reglementeringen FCC/UL/CE/CB/CCC/C-tick/ VCCI/PSE/Gost-R Ja Ja (kantelhoek: 5±1° en 9,5±1°) Ja (Mediacentrum, Invoer, Voeding, Beeldpositie, Helderheid, Beeldkwaliteit, Trapeziumcorrectie, Enter,
PC-timings ondersteunen DSUB-ingang Resolutie 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 720 1280 x 768 1280 x 800 1280 x 1024 1280 x 960 1440 x 900 1400X1050 640x480@67Hz 832x624@75Hz 1024x768@75Hz 1152x870@75Hz Modus 720x400_70 VGA_60 VGA_72 VGA_75 VGA_85 SVGA_56 SVGA_60 SVGA_72 SVGA_75 SVGA_85 XGA_60 XGA_70 XGA_75 XGA_85 1152 x 864_75 1280 x 720_60 1280 x 768_60 WXGA_60 WXGA_75 WXGA_85 SXGA_60 SXGA_75 1280 x 960_60 WXGA+_60 SXGA+_60 MAC13 MAC16 MAC19 MAC21 Vernieuwingsfrequentie (
HDMI (PC) Resolutie Modus 640 x 480 VGA_60 VGA_72 VGA_75 VGA_85 720 x 400 720x400_70 800 x 600 SVGA_60 SVGA_72 SVGA_75 SVGA_85 1024 x 768 XGA_60 XGA_70 XGA_75 XGA_85 1152 x 864 1152 x 864_75 1280x720 1280 x 720_60 1280 x 768 1280 x 768_60 1280 x 800 WXGA_60 WXGA_75 WXGA_85 1280 x 960 1280 x 960_60 1360 x 768 1360 x 768_60 1440 x 900 WXGA+_60 1400X1050 SXGA+_60 640x480@67Hz MAC13 832x624@75Hz MAC16 1024x768@75Hz MAC19 1152x870@75Hz MAC21 Vernieuwingsfrequentie (Hz) 59.94 72.809 75 85.008 70.087 60.