LED projector E-Manual B1M/B1MR
E10324 Revised Edition V2 April 2015 COPYRIGHT AND WARRANTY INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents About this manual.............................................................................................. 5 Conventions used in this manual................................................................ 6 Typography.......................................................................................................... 6 Multi-language versions................................................................................. 6 Safety precautions.....................................
Chapter 3: Using the onscreen display menu Launching programs from the onscreen display menu......................36 Control panel grid...........................................................................................37 Using your LED projector for the first time..............................................38 Accessing your LED projector’s settings...................................................40 Using 3D glasses.................................................................................
About this manual This manual provides information about the hardware and software features of your LED projector through the following chapters: Chapter 1: Knowing your LED Projector This chapter details the parts of your LED projector and its accompanying remote control. Chapter 2: Setting up This chapter shows you how to set up your LED projector and use its parts for input device connection.
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing tasks and prevent damage to your LED projector's data and components.
Safety precautions Using your LED projector • Refer to the manual and take note of the safety instructions before operating your LED projector. • Follow the notes and warnings stated in the user manual. • Do not place your LED projector on uneven or unstable surfaces. • Do not use your LED projector in smoky environments. Smoke residue may cause build-up on critical parts and damage the LED projector or decrease its performance.
Caring for your LED projector • Switch off then unplug the LED projector from the power outlet before cleaning it. • When cleaning the LED projector’s housing, use a clean soft cloth dampened with water or a mix of water and neutral detergent. Wipe it dry using a soft dry cloth. • Ensure that the lens is cool before cleaning it. Gently wipe the lens using a lens cleaning paper. Do not touch the lens with your hands. • Do not use liquid or aerosole cleaners, benzene, or thinners on your LED projector.
Chapter 1: Knowing your LED projector Chapter 1: Knowing your LED projector LED projector E-Manual 9
Features Top view Focus ring The focus ring allows you to adjust the image focus of your LED projector.
Control panel buttons The control panel buttons allow you to navigate the onscreen display menu. Individually, these buttons also correspond to a specific LED projector setting as indicated below. Media Center Input Power Image Position Brightness Image Quality Keystone Main menu/OK Volume Splendid Contrast Setup NOTE: For more information on using the control panel buttons to access your LED projector’s settings, refer to the Accessing your LED projector’s settings section in this manual.
Front view Air vents The air vents allow cool air to enter and warm air to exit the LED projector. WARNING! Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur. AV-IN Lens The lens projects video or image files onscreen from your input device. WARNING! Do not touch the lens using your hands or any sharp object. Lens cover The lens cover protects the lens from scratches and possible dirt build-up.
Rear view AV-IN Infrared (IR) sensor The IR sensor detects signal from your LED projector’s remote control, allowing you to access the LED projector’s control panel from a distance of up to 7 meters and a receiving angle of 15 degrees. Audio output jack port The audio output jack port allows you to connect your LED projector to amplified speakers or headphones. Audio/Video input jack port Insert a 3.5mm composite AV cable into this port to connect your audio/video equipment to the LED projector.
HDMI port This port is for the HDMI (High-Definition Multimedia Interface) connector and is HDCP compliant for HD DVD, Blu-ray, and other protected content playback. VGA port This port allows you to connect your LED projector to other VGA-compatible devices. USB 2.0 port The USB 2.0 (Universal Serial Bus 2.0) port is compatible with USB 2.0 or USB 1.1 devices.
Right side Kensington® security slot The Kensington® security slot allows you to secure your LED projector using Kensington® compatible LED projector security products. Air vents 120 The air vents allow cool air to enter and warm air to exit the LED projector. o WARNING! Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
Left side Power (DC) input port Insert the bundled power adapter into this port to charge the battery pack and supply power to your LED projector. AV-IN WARNING! The adapter may become warm to hot while in use. Do not cover the adapter and keep it away from your body while it is connected to a power source. Air vents The air vents allow cool air to enter and warm air to exit your LED projector.
Bottom view Built-in stand This LED projector comes with a built-in stand that allows you to adjust the height of the projector by either 5 degrees or 9.5 degrees. Tripod socket Connect the LED projector to a tripod using this socket.
LED projector remote control Control panel buttons The control panel buttons allow you to navigate the onscreen display menu. Individually, these buttons also correspond to a specific LED projector setting. NOTE: For more details on using the control panel buttons, refer to the Using the onscreen display menu section in this manual. Battery compartment The battery compartment allows you to use a CR2025 lithium coin battery to power your LED projector’s remote control.
Replacing the battery A. Move the battery compartment’s latch to the right to unlock the battery holder. B. Pull down the battery holder and remove it completely out of the battery compartment.
C. Remove the old battery then insert the new CR2025 lithium coin battery into the battery holder with the positive side (+) facing up. D. Slide the battery holder back into the battery compartment. Push it all the way in until you hear a soft click, indicating that the battery compartment is locked back in place.
Chapter 2: Setting up AV-IN Chapter 2: Setting up LED projector E-Manual 21
Operating your LED projector This portable LED projector allows you to plug and play your devices so you can easily open multimedia files, hear audio straight from its built-in SonicMaster speakers, and experience using Wi-Fi to project onscreen. For your safety and to maintain the quality of this unit, refer to the following steps when operating your LED projector. 1. Connect the LED projector to the power adapter A. Connect the AC/DC power cord to the power adapter. B.
AC power cord requirements Use the correct AC plug type according to your current location. IMPORTANT! Contact your sales dealer if the AC power cord bundled with your LED projector does not match your local power source. NOTE: We highly recommend that you use a video source device that also uses a grounding type plug to prevent signal interference due to voltage fluctuations. for Australia and Mainland China for U.S.A., Canada, and Taiwan for Continental Europe for U.K.
2. Connect the LED projector to your device A.
AV-IN B. Audio/video input jack AV-IN AV-IN NOTE: Refer to the table below to know which pin to connect into the AV-IN port.
C. SD/SDHC AV-IN AV-IN NOTE: For details on how to launch files from a memory card, refer to the Launching the Media Center section in this manual.
D. HDMI AV-IN AV-IN NOTE: Some mobile phone models may require a specific adapter for use with HDMI ports.
E.
F. USB 2.0 AV-IN Compatible USB 2.0 input devices: USB cable Flash drive Wi-Fi dongle NOTE: For details on using the USB 2.0 port to launch supported file formats, refer to the Launching the Media Center section in this manual.
3. Adjust the height of the LED projector Your LED projector comes with a built-in stand that helps adjust the image height onscreen. WARNING! Ensure that the built-in stand is fully retracted before placing the LED projector inside the projector bag. NOTES: 30 • Place the LED projector on a stable flat surface. • Keep a space of 30 cm or more between the sides of the LED projector. • Consult your dealer for special installation procedures like suspending the LED projector from the ceiling.
Screen size and projection distance table Adjust the LED projector’s distance from the screen using the table below. screen size LED projector projection distance Screen size - 16:10 Projection distance (inches) (millimeters) (meters) 30 762 0.58 40 1016 0.78 60 1524 1.16 80 2032 1.55 100 2540 1.94 120 3048 2.33 140 3556 2.71 160 4064 3.
4.
5. Adjust the image focus Move the focus ring to the left or to the right to adjust the image focus. NOTE: Use a still image when adjusting the onscreen display.
LED projector E-Manual
Chapter 3: Using the onscreen display menu Chapter 3: Using the onscreen display menu LED projector E-Manual 35
NOTE: The following screenshots are for reference only and may be updated without prior notice. Launching programs from the onscreen display menu The onscreen display menu contains a set of programs and settings designed to maximize your use of the LED projector. You can navigate inside the onscreen display menu using the control panel buttons on your LED projector or its accompanying remote control.
Control panel grid The control panel grid guides you through the process of using the control panel buttons to launch active options inside your onscreen display menu. The control panel grid represents the 8 buttons surrounding the button on the control panel.
Using your LED projector for the first time Refer to the following steps when using your LED projector for the first time. 1. Set up your LED projector then press the power button once. The ASUS welcome screen appears to indicate that the LED projector is now turned on. 2. Using the control panel buttons, select the language you want to use in your LED projector. 3.
Off - This option disables viewing demo videos on your LED projector and proceeds to scan for connected input devices. IMPORTANT! This option deactivates the Demo Mode control panel grid and instead launches the Input control panel grid whenever you turn on your LED projector. NOTE: To know more about the functions of Demo Mode, refer to the Using Demo Mode section in this manual. 4.
Accessing your LED projector’s settings Aside from using the control panel buttons to navigate the onscreen display menu, you can also use each of these buttons to launch the following LED projector settings: IMPORTANT! Press Projector Setting on the control panel grid to use these functions in the Media Center. Power Press this button to turn the LED projector on or off. Brightness Press this button to adjust the brightness of your projection onscreen.
Contrast Press this button to set the difference between lighten or darken your projection onscreen. Media Center Press this button to launch the Media Center. NOTE: For more details, refer to the Using the Media Center section in this manual. Input Press this button to scan the connected devices to your LED projector.
Splendid Press this button to activate either of the following display modes: Standard, Black Board, White Board, Dynamic, sRGB, Theater, Scenery.
Image Setting Press this button to access the following image settings: NOTE: The available options under Image Setting varies between the VGA and Composite source. • Color Temperature - This option allows you to adjust the light temperature of your LED projector according to the following options: Low, Medium, High. • Color Adjustment - This option allows you to adjust the color of your screen according to the following settings: Auto, RGB, YUV.
Image Position Press this button to access the following image position settings: • Auto Keystone - This option allows you to automatically adjust the alignment of your image. • Horizontal Positioning - This option allows you to shift the image’s position horizontally. • Projector Position - This option allows you to adjust the position of the projected image based from the location of your LED projector. • Vertical Positioning - This option allows you to vertically shift the image position.
• Phase - This option allows you to adjust the number of lines emitted by the LED projector relative to the computer. • Clock - This option allows you to adjust the frequency of the LED projector relative to the computer.
Setup Press this button to access the following LED projector settings: • Information - This option shows you the following information about your LED projector: currently used input port, LED projector’s model name, and currently use Splendid mode. • Reset All - This option allows you to reset all the settings you have currently set up for your LED projector.
• Power Timeout - This option allows you to set the number of minutes before your LED projector automatically shuts down when not in use. • Demo Mode - This option turns the demo video features of your LED projector on or off. NOTE: For more details, refer to the Using Demo Mode section in this manual.
Using 3D glasses Your LED projector supports 3D technology for an enhanced viewing experience. Refer to the following details when using your purchased 3D glasses with this LED projector. IMPORTANT: Purchase TI 3D-ready glasses. Your 3D files must be compatible with the TI 3D format. NOTE: For more details on viewing 3D files, refer to the user guide that comes with your 3D glasses. To view 3D files: 1. Download a compatible 3D player software on your computer.
Using Demo Mode View the internal demo video that comes with your LED projector or your own demo videos using Demo Mode. Demo Mode is automatically enabled in your LED projector if you chose On when you turn on the device for the first time. However, choosing Off disables this feature. In this case, you can enable this feature using the following steps. Enabling Demo Mode 1. Launch the Setup control panel grid. 2. Choose Demo Mode > On.
Creating and playing your own demo video Your LED projector allows you to create simple demo videos using a series of photos presented as a slideshow. You may also add a background music to go with the slideshow as it plays onscreen. Create your own demo video and play this on your LED projector using the following steps: 1. Create a folder named ASUS in your SD Card or USB drive. 2. Select the photos you want to include in your demo video and one music file (optional).
Using the Media Center Show photos, play videos, listen to audio music, and view documents using your LED projector’s Media Center. Through the Media Center, you can also access the Wi-Fi capabilities of your LED projector and connect to USB-enabled input devices. Launching the Media Center The Media Center automatically launches after the LED projector detects an SD card, external drive, or Wi-Fi dongle connection. You can also manually launch the Media Center by pressing from the control panel.
Opening files from the SD Card or USB Drive Photo Supported image file formats: • JPG • JPEG • BMP (bitmap) To open an image file: 1. Connect your input device to the LED projector. 2. Turn on the LED projector to launch the Media Center’s onscreen display menu. 3. Select the input device you wish to access. 4. Select Photo. 5. Refer to the control panel grid to help you browse and select the file from your input device. 6. Press to open the selected folder or file. 7.
Video File Type Video Codec Resolution Bit Rate Frame Rate Audio Codec Remarks 280 Mbps 30 fps AC3 DTS MPEG 1/2/3 PCM ADPCM AAC No Support VC-1 AP AVI MKV DIVX DIVX4/5/6 XVID MPEG-2/4 H. 264 M-JPEG WMV3 1080P TS MPEG-2 H. 264 1080P 20 Mbps 30 fps AC3 AAC MPEG 1/2/3 DTS LPCM H. 264 support less than 4 reference frames DAT VOB MPG MPEG MPEG-1 MPEG-2 1080P 20 Mbps 30 fps MPEG-1/2/3 AC3 DTS LPCM - MOV MP4 3GP MPEG-4 H. 264 H. 263 1080P 20 Mbps 30 fps AAC AMR PCM ADPCM H.
To open a video file: 1. Connect your input device to the LED projector. 2. Turn on the LED projector to launch the Media Center’s onscreen display menu. 3. Select the input device you wish to access. 4. Select Video. 5. Refer to the control panel grid to help you browse and select the file from your input device. 6. Press to open the selected folder or file. 7. After opening the file, press on the control panel to launch the control panel grid.
Audio File Type Sample Rate (KHz) Bit Rate (Kbps) MP1/ MP2/ MP3 8-48 8—320 WMA 22-48 5—320 64—320 OGG 8-48 ADPCM-WAV 8-48 32—384 PCM-WAV 8-48 128—1536 AAC 8-48 8—256 To play audio files, refer to the following steps: 1. Connect your device to the LED projector. 2. Turn on the LED projector to launch the Media Center’s onscreen display menu. 3. Select the input device you wish to access. 4. Select Music. 5.
Document File Type Support Version Adobe PDF PDF 1.0 PDF 1.1 PDF 1.2 PDF 1.3 PDF 1.4 Size Limitation Comment Up to 75 MB - Microsoft® Microsoft® Office Word 1995, Because the office Office Word Microsoft® Office Word viewer does not load all pages of a 1997, Microsoft® Office Word 2000, Microsoft® Microsoft® Word file at the same Office Word 2002, Microsoft ® Office Word 2003 time, there are no obvious page or line limitations.
To view documents, refer to the following steps: 1. Connect your device to the LED projector. 2. Turn on the LED projector to launch the Media Center’s onscreen display menu. 3. Select the input device you wish to access. 4. Select Document. 5. Refer to the control panel grid to help you browse and select the file from your input device. Press 6. Press to open the selected folder or file. 7. After opening the file, press on the control panel to launch the control panel grid.
Ezlink This feature allows you to project from input devices, such as laptops and desktop computers, using a USB cable. To project files using Ezlink you need to install EZ Display in your input device’s operating system. For Windows®: 1. Connect your LED projector to your device using a USB cable. 2. Turn on your input device and go to My Computer. 3. Select EZ Display> EZ_USB_installer.
Using Ezlink to project from your input device 1. Turn on your input device then connect to the LED projector using a USB cable. 2. Turn on the LED projector. If the Media Center does not automatically launch, press on the control panel. 3. Select EzLink. Wait for the USB icon to appear onscreen to verify that the LED projector was successfully connected to your input device. 4. From your input device, select the EZ-USB Mirror-only icon to start projecting from your input device to the LED projector.
WiFi This feature enables wireless connections to your LED projector from input devices equipped with Wi-Fi capabilities like laptops and mobile phones. IMPORTANT! A Wi-Fi dongle is required to enable this feature. Installing the ASUS WiFi Projection You need to install the ASUS WiFi Projection software to project from your input device using WiFi. Download this application using any of the following options: • If you are using an Android OS, download ASUS WiFi Projection from Google® Play Store.
2. Type the password as shown on your LED projector. 3. After connecting your device, type in this IP address on your browser: http://192.168.111.
4. Download ASUS WiFi Projection software from the IP address by clicking on either of the following icons. NOTE: The ASUS WiFI projection software is compatible with Windows® 7, Windows® XP, Windows® Vista, and Mac® OS X. The list of compatible operating systems are subject to change without prior notice.
Using Display by AP mode Using this mode, you can establish a one-to-one connection between your input device and your LED projector. 1. Connect the Wi-Fi dongle to your LED projector to launch the Media Center. NOTE: If the Media Center does not automatically launch, press then select WiFi>Display via AP mode. 2. Enable the WiFi connection in your input device. Select ASUSB1MR (default SSID) or the new SSID you configured for the B1M/B1MR LED projector.
2. Select Display by Client mode. 3. Press to scroll up or Wi-Fi hotspots then press to scroll down the list of available to select the Wi-Fi hotspot you would like to connect to. 4. Press to launch the onscreen display menu’s keyboard. Refer to the control panel grid when navigating the keyboard to input the Wi-Fi hotspot’s password then press Enter. NOTE: The B1M/B1MR LED projector supports WPA/WPA2-enabled devices. 5.
Using WiFi AP setting This allows you to change the SSID, Security, and Password settings when using Display by AP mode. Using WiFi Client setting This scans the available WiFi hotspots that you can connect to your LED projector to enable the Display by Client mode. Multi-language versions Download other language versions of this E-Manual via this website:http://support.asus.
LED projector E-Manual
Appendices Appendices Appendices LED projector E-Manual 67
Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
Specifications for B1M/B1MR LED projector Display Display Technology Light Source Light Source Life True Resolution (native) Light Output Contrast Ratio (typical) Color Saturation (NTSC) Display Colors 0.45” DLP® R/G/B LED 30,000 hours (max) WXGA 1280x800 900 Lumens (B1MR), 700 Lumens (B1M) 3500:1 DCR Typical 100% 1.07 Billion Colors Projection Throw Ratio Lens Projection Distance Projection/Screen Size Projection Offset Zoom Ratio 0.9@16:10 (51”@1m) 0.6 ~ 3m 31.
Power Power On Mode ≤65W(Eco mode)/≤85W(Normal Mode) Standby Mode <0.5W Noise Acoustic Noise Normal mode: 32dBA - 34dBA Eco mode: 28dBA - 30dBA Input or Output PC Signal Input D-sub, HDMI1.3 (HDCP support) Video Input Composite Video Audio Out Earphone out Card Reader Yes (1 x SD card slot for multimedia playback) USB 2.
Mechanical Chassis Colors Design Tripod Socket Black Yes Supporting Stand Yes (tilt angle: 5±1° and 9.5 ±1°) On-machine Buttons Yes (Media Center, Input, Power, Image position, Brightness, Image quality, Keystone, Enter, Volume, Splendid, Contrast, Setup) Lens Cover Yes Security Kensington lock Yes Dimension Physical Dimension 175(W)x139(D)x44.5(H)mm Box Dimension 338(W)x225(D)x80(H)mm Net Weight (Esti.) <0.9 Kg Gross Weight (Esti.) <2.
Support PC Timings DSUB Input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 720 1280 x 768 1280 x 800 1280 x 1024 1280 x 960 1440 x 900 1400X1050 640x480@67Hz 832x624@75Hz 1024x768@75Hz 1152x870@75Hz Mode 720x400_70 VGA_60 VGA_72 VGA_75 VGA_85 SVGA_56 SVGA_60 SVGA_72 SVGA_75 SVGA_85 XGA_60 XGA_70 XGA_75 XGA_85 1152 x 864_75 1280 x 720_60 1280 x 768_60 WXGA_60 WXGA_75 WXGA_85 SXGA_60 SXGA_75 1280 x 960_60 WXGA+_60 SXGA+_60 MAC13 MAC16 MAC19 MAC21 Refresh rate (Hz) 70.087 59.
HDMI (PC) Resolution 640 x 480 720 x 400 800 x 600 1024 x 768 1152 x 864 1280x720 1280 x 768 1280 x 800 1280 x 960 1360 x 768 1440 x 900 1400X1050 640x480@67Hz 832x624@75Hz 1024x768@75Hz 1152x870@75Hz Mode VGA_60 VGA_72 VGA_75 VGA_85 720x400_70 SVGA_60 SVGA_72 SVGA_75 SVGA_85 XGA_60 XGA_70 XGA_75 XGA_85 1152 x 864_75 1280 x 720_60 1280 x 768_60 WXGA_60 WXGA_75 WXGA_85 1280 x 960_60 1360 x 768_60 WXGA+_60 SXGA+_60 MAC13 MAC16 MAC19 MAC21 Refresh rate (Hz) 59.94 72.809 75 85.008 70.087 60.317 72.
