Manual

3-6ASUSLCDMonitorB24Series
3.3 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON
• Press the buttontocheckifthemonitorisinthe
ON mode.
• Checkifthepowercordisproperlyconnectedtothe
monitor and the power outlet.
The power LED lights amber and
there is no screen image
• Checkifthemonitorandthecomputerareinthe
ON mode.
• Makesurethesignalcableisproperlyconnected
the monitor and the computer.
• Inspectthesignalcableandmakesurenoneofthe
pins are bent.
• Connect the computer with another available
monitortocheckifthecomputerisproperlyworking.
Screenimageistoolightordark • Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sizedproperly
• Press the buttonfor2~4secondsto
automaticallyadjusttheimage(forVGAinputonly).
• AdjusttheH-PositionorV-PositionsettingsviaOSD
(forVGAinputonly).
Screen image bounces or a wave
pattern is present in the image
• Makesurethesignalcableisproperlyconnectedto
the monitor and the computer.
• Moveelectricaldevicesthatmaycauseelectrical
interference.
Screen image has color defects
(whitedoesnotlookwhite)
• Inspectthesignalcableandmakesurethatnoneof
the pins are bent.
• Perform All Reset via OSD.
• AdjusttheR/G/BcolorsettingsorselecttheColor
Temperature via OSD.
Screenimageisblurryorfuzzy
• Press the buttonfor2~4secondsto
automaticallyadjusttheimage(forVGAinputonly).
• AdjustthePhaseandClocksettingsviaOSD.