User Manual

1-10
Chapter 1: Product introduction
• 8 ~ 13 mining cards
Tomakeyourbuildmorestable,whenusing8ormoreminingcards,werecommendthat
youinstall4GBmemorymodulesandchangethesizeofthevirtualmemorypagingleto
20GB.
1. InstallyourminingcardsintothePCIex16slotandthePCIex1slotslabeledAxx and
Bxx insequentialorderA01~B12.
2. Connectyourpowersupplyunit(PSU)tothe24-pinEATXpowerconnectorslabeled
EATXPWR_AandEATXPWR_B.
®
EATXPWR_A
EATXPWR_B
EATXPWR_C
A01 A02 A03
A04 A05 A06
PCIEX16_A1
B07 B08 B09
B10 B11 B12
AUXPWR_A1
AUXPWR_A3
AUXPWR_A2
Tomakethepowerconsumptioninbalance,connectthe6-pin/8-pinpowerconnectorsof
yourminingcardsinareaAtothepowersupplyunit(PSU)pluggedinEATXPWR_A,and
miningcardsinareaBtothepowersupplyunit(PSU)pluggedinEATXPWR_B.