User's Manual
Table Of Contents
- 包装内容
- B75M-A 规格列表
- 关于这本用户手册
- 安全性须知
- 第一章:产品介绍
- 第二章:BIOS 信息
- 2.1 更新您的 BIOS 程序
- 2.2 BIOS 程序设置
- 2.3 主菜单(Main)
- 2.4 Ai Tweaker 菜单(Ai Tweaker)
- 2.5 高级菜单(Advanced)
- 2.6监控菜单(Monitor)
- 2.7 启动菜单(Boot)
- 2.7.1 Fast Boot [Enabled]
- 2.7.2 Boot Logo Display [Enabled]
- 2.7.3 Bootup NumLock State [On]
- 2.7.4 Wait for‘F1’If Error [Enabled]
- 2.7.5 Option ROM Messages [Force BIOS]
- 2.7.6 Interrupt 19 Capture [Disabled]
- 2.7.7 Setup Mode [EZ Mode]
- 2.7.8 CSM(兼容性支持模块)
- 2.7.9 Security Boot
- 2.7.10 启动项目顺序(Boot Option Priorities)
- 2.7.11 Boot Override
- 2.8 工具菜单(Tool)
- 2.9 退出 BIOS 程序(Exit)
2-25華碩 B75M-A 主板用戶手冊
2.5.8 高級電源管理設置(APM)
Restore AC Power Loss [Power Off]
[Power On] 當 AC 電源中斷之後系統維持開機狀態。
[Power Off]
在 AC 電源中斷之後系統將進入關閉狀態。
[Last State]
將系統設置恢復到電源未中斷之前的狀態。
Power On By PCIE/PCI [Disabled]
[Disabled] 關閉 PCIE/PCI 設備喚醒功能。
[Enabled]
開啟 PCIE/PCI 設備喚醒功能。
Power On By RTC [Disabled]
[Disabled] 關閉實時鐘(RTC)喚醒功能。
[Enabled] 若設為 [Enabled], 將出現 RTC Alarm Date (Days) 與 Hour/Minute/
Second 子項目,您可以自行設置時間讓系統自動啟動。
2.5.9 網絡堆棧(Network Stack)
Network Stack [Disabled]
本項目用來開啟或關閉 UEFI 網絡堆棧。設置值有:[Disabled] [Enabled]
只有當您將前一項設置為 [Enabled] 后,以下兩個項目才會出現。
Ipv4 PXE Support [Enabled]
本項目可讓您開啟或關閉 Ipv4 PXE Boot 支持。設置值有:[Disable] [Enable]
Ipv6 PXE Support [Enabled]
本項目可讓您開啟或關閉 Ipv6 PXE Boot 支持。設置值有:[Disable] [Enable]