User Manual
Table Of Contents
- 目录
- 1. 认识 BIOS 程序
- 2. BIOS 程序设置
- 3. 我的最爱(My Favorites)
- 4. 主菜单(Main Menu)
- 5. Ai Tweaker 菜单(Ai Tweaker menu)
- 6. 高级菜单(Advanced menu)
- 6.1 平台各项设置(Platform Misc Configuration)
- 6.2 CPU 设置(CPU Configuration)
- 6.3 系统代理设置(System Agent Configuration)
- 6.4 PCH 设置(AMT Configuration)
- 6.5 PCH 储存设备设置(PCH Storage Configuration)
- 6.6 PCH-FW 设置(PCH-FW Configuration)
- 6.7 Thunderbolt(TM) 设置(Thunderbolt(TM) Configuration)
- 6.8 可信任计算(Trusted Computing)
- 6.9 PCI 子系统设置(PCI Subsystem Settings)
- 6.10 USB 设置(USB Configuration)
- 6.11 网络协定堆栈设置(Network Stack Configuration)
- 6.12 NVMe 设置(NVMe Configuration)
- 6.13 HDD/SSD SMART 信息(HDD/SSD SMART Information)
- 6.14 APM 设置(APM Configuration)
- 6.15 内置设备设置(OnBoard Devices Configuration)
- 6.16 Intel(R) 快速保存技术(Intel(R) Rapid Storage Technology)
- 7. 监控菜单(Monitor menu)
- 8. 启动菜单(Boot menu)
- 9. 工具菜单(Tool menu)
- 10. 退出 BIOS 程序(Exit menu)
- 11. 升级 BIOS 程序
28
PRIME / ProArt / TUF GAMING Intel 700 系列 BIOS 用戶手冊
MemoryTrainingAlgorithms
本菜單的項目用來讓您開啟或關閉不同的內存訓練演算法。
Early Command Training
設置值有:[Auto] [Enabled] [Disabled]
SenseAmp Offset Training
設置值有:[Auto] [Enabled] [Disabled]
Early ReadMPR Timing Centering 2D
設置值有:[Auto] [Enabled] [Disabled]
Read MPR Training
設置值有:[Auto] [Enabled] [Disabled]
Receive Enable Training
設置值有:[Auto] [Enabled] [Disabled]
Jedec Write Leveling
設置值有:[Auto] [Enabled] [Disabled]
Early Write Timing Centering 2D
設置值有:[Auto] [Disabled] [Enabled]
Early Read Timing Centering 2D
設置值有:[Auto] [Disabled] [Enabled]
Write Timing Centering 1D
設置值有:[Disabled] [Enabled]
Write Voltage Centering 1D
設置值有:[Auto] [Disabled] [Enabled]
Read Timing Centering 1D
設置值有:[Auto] [Disabled] [Enabled]
Read Timing Centering with JR
設置值有:[Auto] [Disabled] [Enabled]
Dimm ODT Training*
設置值有:[Auto] [Disabled] [Enabled]
Max RTT_WR
在電力訓練時可限制 RTT_WR 的最大值。
設置值有:[ODT OFF] [120 Ohms]
DIMM RON Training*
設置值有:[Auto] [Disabled] [Enabled]
Write Drive Strength/Equalization 2D*
設置值有:[Auto] [Disabled] [Enabled]
Write Slew Rate Training*
設置值有:[Auto] [Disabled] [Enabled]
Read ODT Training*
設置值有:[Auto] [Disabled] [Enabled]
Comp Optimization Traning
設置值有:[Auto] [Disabled] [Enabled]
Read Equalization Training*
設置值有:[Auto] [Disabled] [Enabled]
Read Amplifier Training*
設置值有:[Auto] [Disabled] [Enabled]
Write Timing Centering 2D
設置值有:[Auto] [Disabled] [Enabled]
Read Timing Centering 2D
設置值有:[Auto] [Disabled] [Enabled]