User Manual
Table Of Contents
- 目录
- 1. 认识 BIOS 程序
- 2. BIOS 程序设置
- 3. 我的最爱(My Favorites)
- 4. 主菜单(Main Menu)
- 5. Ai Tweaker 菜单(Ai Tweaker menu)
- 6. 高级菜单(Advanced menu)
- 6.1 平台各项设置(Platform Misc Configuration)
- 6.2 CPU 设置(CPU Configuration)
- 6.3 系统代理设置(System Agent Configuration)
- 6.4 PCH 设置(AMT Configuration)
- 6.5 PCH 储存设备设置(PCH Storage Configuration)
- 6.6 PCH-FW 设置(PCH-FW Configuration)
- 6.7 Thunderbolt(TM) 设置(Thunderbolt(TM) Configuration)
- 6.8 可信任计算(Trusted Computing)
- 6.9 PCI 子系统设置(PCI Subsystem Settings)
- 6.10 USB 设置(USB Configuration)
- 6.11 网络协定堆栈设置(Network Stack Configuration)
- 6.12 NVMe 设置(NVMe Configuration)
- 6.13 HDD/SSD SMART 信息(HDD/SSD SMART Information)
- 6.14 APM 设置(APM Configuration)
- 6.15 内置设备设置(OnBoard Devices Configuration)
- 6.16 Intel(R) 快速保存技术(Intel(R) Rapid Storage Technology)
- 7. 监控菜单(Monitor menu)
- 8. 启动菜单(Boot menu)
- 9. 工具菜单(Tool menu)
- 10. 退出 BIOS 程序(Exit menu)
- 11. 升级 BIOS 程序
34
PRIME / ProArt / TUF GAMING Intel 700 系列 BIOS 用戶手冊
以下項目只有在 SA GV 設為 [Enabled]、[Fixed to 1st Point]、[Fixed to 2nd
Point]、[Fixed to 3rd Point] 或 [Fixed to 4th Point] 時才會出現。
First Point Frequency
本項目可以指定頻率。0-MRC 自動,或是指定為整數的特定頻
率:2000Mhz。
設置值有:[0] - [65535]
First Point Gear
本項目可以設置 SAGV 點的齒輪比。0-Auto、1-G1、2-G2 與
4-G4。設置值有:[0] - [4]
Second Point Frequency
本項目可以指定頻率。0-MRC 自動,或是指定為整數的特定頻
率:2000Mhz。設置值有:[0] - [65535]
Second Point Gear
本項目可以設置 SAGV 點的齒輪比。0-Auto、1-G1、2-G2 與
4-G4。設置值有:[0] - [4]
Third Point Frequency
本項目可以指定頻率。0-MRC 自動,或是指定為整數的特定頻
率:2000Mhz。設置值有:[0] - [65535]
Third Point Gear
本項目可以設置 SAGV 點的齒輪比。0-Auto、1-G1、2-G2 與
4-G4。設置值有:[0] - [4]
Fourth Point Gear 請在主菜單裡設置。
Digi+VRM
CPUInputVoltageLoad-lineCalibration
設置值有:[Auto] [Level 1] [Level 2] [Level 3]
CPULoad-lineCalibration
Load-line 是根據 Intel 所訂立之 VRM 規格,其設置值將影響繪圖處理器電
壓。CPU 運作電壓將依 CPU 的負載呈比例性遞減,當您將此項目的設置值設
置越高時,將可提高電壓值與超頻能力,但會增加 CPU 及 VRM 的溫度。從
1-7 中選擇一個等級來調整負載線斜率。等級 1 代表更大的 VDroop,等級 7
代表最小 VDroop。
設置值有:[Auto] [Level 1] [Level 2] [Level 3] [Level 4:Recommended for
OC] [Level 5] [Level 6] [Level 7]
實際提升的性能視 CPU 型號而異。
請勿將散熱系統移除,散熱環境需受到監控。
SynchACDCLoadlinewithVRMLoadline
開啟本項目來自動調整 VRM 負載線以匹配 AC/DC 負載線。
設置值有:[Disabled] [Enabled]