User Manual

Table Of Contents
PRIME / ProArt / TUF GAMING Intel 700 系列 BIOS 使用手冊
29
Command Voltage Centering
設定值有:[Auto] [Disabled] [Enabled]
Early Command Voltage Centering
設定值有:[Auto] [Disabled] [Enabled]
Write Voltage Centering 2D
設定值有:[Auto] [Disabled] [Enabled]
Read Voltage Centering 2D
設定值有:[Auto] [Disabled] [Enabled]
Late Command Training
設定值有:[Disabled] [Enabled] [Auto]
Round Trip Latency
設定值有:[Auto] [Disabled] [Enabled]
Turn Around Timing Training
設定值有:[Auto] [Disabled] [Enabled]
CMD CTL CLK Slew Rate
設定值有:[Auto] [Disabled] [Enabled]
CMD/CTL DS & E 2D
設定值有:[Auto] [Disabled] [Enabled]
Read Voltage Centering 1D
設定值有:[Auto] [Disabled] [Enabled]
TxDqTCO Comp Training*
設定值有:[Auto] [Disabled] [Enabled]
ClkTCO Comp Training*
設定值有:[Auto] [Disabled] [Enabled]
TxDqsTCO Comp Training*
設定值有:[Auto] [Disabled] [Enabled]
VccDLL Bypass Training*
設定值有:[Auto] [Disabled] [Enabled]
CMD/CTL Drive Strength Up/Dn 2D
設定值有:[Auto] [Disabled] [Enabled]
DIMM CA ODT Training
設定值有:[Auto] [Disabled] [Enabled]
PanicVttDnLp Training*
設定值有:[Auto] [Disabled] [Enabled]
Read Vref Decap Traning*
設定值有:[Auto] [Disabled] [Enabled]
Vddq Training
設定值有:[Auto] [Disabled] [Enabled]
Duty Cycle Correction Training
設定值有:[Auto] [Disabled] [Enabled]
Rank Margin Tool Per Bit
設定值有:[Auto] [Disabled] [Enabled]
DIMM DFE Training
設定值有:[Auto] [Disabled] [Enabled]