User Manual
Table Of Contents
- 1. Kennenlernen des BIOS
- 2. BIOS-Setup-Programm
- 3. Favoriten
- 4. Hauptmenü
- 5. Ai Tweaker-Menü
- 6. Advanced-Menü
- 6.1 Weitere Plattformkonfiguration
- 6.2 CPU-Konfiguration
- 6.3 System Agent (SA) Configuration (Systemagent- (SA-) Konfiguration)
- 6.4 PCH-Konfiguration
- 6.5 PCH Speicherkonfiguration
- 6.6 PCH-FW Konfiguration
- 6.7 Thunderbolt(TM) Konfiguration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Einstellungen
- 6.10 USB-Konfiguration
- 6.11 Netzwerkstapelkonfiguration
- 6.12 NVMe-Konfiguration
- 6.13 SMART-Informationen zu Festplatte/SSD
- 6.14 APM-Konfiguration
- 6.15 Onboard-Gerätekonfiguration
- 6.16 Intel(R) Rapid Storage-Technologie
- 7. Überwachungsmenü
- 8. Boot Menü
- 9. Tools-Menü
- 10. Exit-Menü
- 11. Aktualisieren des BIOS
30
BIOS-Handbuch für PRIME / ProArt / TUF GAMING Intel 700 Serie
Command Voltage Centering
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Anfängliches Command Voltage Centering
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Write Voltage Centering 2D
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Read Voltage Centering 2D
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Training für späten Befehl
Konfigurationsoptionen: [Disabled] [Enabled] [Auto]
Round Trip Latenz
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Turn Around Timing Training
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
CMD CTL CLK Slew Rate
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
CMD/CTL DS & E 2D
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Read Voltage Centering 1D
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
TxDqTCO Comp Training*
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
ClkTCO Comp Training*
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
TxDqsTCO Comp Training*
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
VccDLL Bypass Training*
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
CMD/CTL Drive Strength Up/Dn 2D
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
DIMM CA ODT Training
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
PanicVttDnLp Training*
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Read Vref Decap Training*
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Vddq Training
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Duty Cycle Correction Training (Training zur Korrektur des Arbeitszyklus)
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
Rank-Margin-Tool per Bit
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]
DIMM DFE Training
Konfigurationsoptionen: [Auto] [Enabled] [Disabled]