Installation Manual

Step 3. Install the CPU
Hold the CPU with two fingers, then place it firmly and vertically onto the CPU socket
as shown in the picture below. Check and ensure both latches on the CPU socket fits
into the side latches on the CPU.
Step 4. Confirm the Stability of CPU
Check from both ends of the CPU softly with two fingers to ensure the CPU sits
properly on the CPU socket.
Note: If you feel abnormal force feedbacks from under the CPU when checking the
stability, remove the CPU and try sitting the CPU back into the CPU socket again.
Without doing so may result in the damage of CPU pins after locking the CPU
retention in place.
2.
Check
both
latches
of CPU and CPU socket
are matched.
1.
Place the CPU
vertically
onto the CPU
socket.
Check from both ends of the CPU to confirm the stability.