Specifications

2-18
Chapter 2: Getting started
MISC
MRC Fast Boot [Auto]
Allows you to enable or disable the MRC fast boot.
[Auto] Selects the optimum MRC fast boot.
[Enabled] Enables the MRC fast boot.
[Disable] Disables the MRC fast boot.
DRAM CLK Period [Auto]
Conguration options: [Auto] [1] – [14]
Channel A DIMM Control [Enable Bot...]
Conguration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Channel B DIMM Control [Enable Bot...]
Conguration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Scrambler Setting [Optimized ...]
Conguration options: [Optimized (ASUS)] [Default (MRC)]
MCH Full Check [Auto]
Allows you to enable, disable, or automatically set the MCH Full Check function.
Conguration options: [Auto] [Enabled] [Disabled]
Skew Control
Adjust these items may enhance the DRAM overclocking capability and stability.
Transmitter Rising Slope [Auto]
Conguration options: [0] ~ [31]
Transmitter Fallng Slope [Auto]
Conguration options: [0] ~ [31]
Transmitter Control Time [Auto]
Conguration options: [0] ~ [31]
Receiver Rising Slope [Auto]
Conguration options: [0] ~ [31]
Receiver Fallng Slope [Auto]
Conguration options: [0] ~ [31]
Receiver Control Time [Auto]
Conguration options: [0] ~ [31]
2.5.11 DIGI+ VRM
CPU Load-Line Calibration [Auto]
Load-line is dened by Intel VRM specication and affects CPU voltage. The CPU working
voltage will decrease proportionally to CPU loading. Higher value gets a higher voltage and
better overclocking performance, but increases the CPU and VRM thermal conditions. This
item allows you to adjust the voltage range from the following percentages to boost the
system performance. Conguration options: [Auto] [Level 1] ~ [Level 9]
The actual performance boost may vary depending on your CPU specication.