- ASUS Vintage-PE2 Barebone System Quick Installation Guide

vivi
vivi
vi
Installing the fan and heatsink assembly
FastenerFastener
FastenerFastener
Fastener
Motherboard holeMotherboard hole
Motherboard holeMotherboard hole
Motherboard hole
Narrow endNarrow end
Narrow endNarrow end
Narrow end
of the grooveof the groove
of the grooveof the groove
of the groove
3
3
2
2
2
2
3
3
IMPORTANT. IMPORTANT.
IMPORTANT. IMPORTANT.
IMPORTANT. Do not forget to connect the CPU fan connector!
Hardware monitoring errors can occur if you fail to plug this connector.
NOTE. NOTE.
NOTE. NOTE.
NOTE. Make sure to orient
each fastener with the narrow
end of the groove pointing
outward. (The photo shows
the groove shaded for
emphasis.)
Place the heatsink on top of the
installed CPU, making sure that the
four fasteners match the holes on
the motherboard.
1
Push down two fasteners at a time
in a diagonal sequence to secure
the heatsink and fan assembly in
place.
Connect the CPU fan cable
to the connector on the
motherboard labeled
CPU_FAN1.
4