User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit (BE209/BE229/BE239/BE249/BE24A/ BE24W/BE27A height adjustment base)
- 2.4 Adjusting the monitor
- 2.5 Connecting the cables
- 2.6 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Troubleshooting (FAQ)
- 3.4 Supported operating modes
1-5ASUS BE Series LCD Monitor
BE27AQLB
10
10
1
2
3
4
5
7
8 9
11
10
12
BE229QLBH/BE239QLBH/
BE249QLBH/BE24AQLBH
1
2
3
4 5
7
8
11
6 9
BE24WQLB/BE24WQSB
10
1
2
3
4
7
8
11
6 9
10
1. Kensington lock slot.
2. Power switch. Press the switch to turn on/off power.
3. AC-IN port. This port connects the power cord.
4. DisplayPort in. This port is for connection with a DisplayPort compatible
device.
5. DVI port. This 24-pin port is for PC (Personal Computer) DVI-D digital signal
connection.
6. VGA port. This 15-pin port is for PC VGA connection.
7. Audio-in port. This port connects PC audio source by the bundled audio
cable.
8. Earphone jack. This port is only available when an HDMI/DisplayPort cable
is connected.
9. USB 3.2 Gen 1 Type-B. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
10. USB 3.2 Gen 1 Type-A. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.
11. HDMI port. This port is for connection with an HDMI compatible device.
12. Mini DisplayPort in. This port is for connection with a Mini DisplayPort
compatible device.