User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit (BE209/BE229/BE239/BE249/BE24A/ BE24W/BE27A height adjustment base)
- 2.4 Adjusting the monitor
- 2.5 Connecting the cables
- 2.6 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Troubleshooting (FAQ)
- 3.4 Supported operating modes
2-4 Chapter 2: Setup
2.4 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• BE229/BE239/BE249 simple base: The recommended adjusting angle is +20
to -5˚.
• BE209/BE229/BE239/BE249/BE24A/BE24W height adjustment base: You can
adjust the monitor’s angle from +35˚ to -5˚and it allows 90˚ swivel adjustment
from either left or right. You can also adjust the monitor’s height within +/- 130
mm.
• BE24WQSB height adjustment base: You can adjust the monitor’s angle from
+35˚ to -5˚and it allows 180˚ swivel adjustment from either left or right. You can
also adjust the monitor’s height within +/- 130 mm.
• BE27A height adjustment base: You can adjust the monitor’s angle from +35˚
to -5˚and it allows 90˚ swivel adjustment from either left or right. You can also
adjust the monitor’s height within +/- 150 mm.
(Tilt)
(Swivel) (Height adjustment)
(Tilt)
simple base
-5° ~ +20°
height adjustment base height adjustment base
150mm
130mm
(only for BE27A)
-5° ~ +35°
height adjustment base
(only for BE24WQSB)
-90° ~ +90°
-180° ~ +180°
Pivoting the monitor (BE209/BE229/BE239/BE249/BE24A/BE24W/BE27A
height adjustment base)
1. Lift the monitor to the highest position.
2. Tilt the monitor to its maximum angle.
3. Pivot the monitor clockwise/counterclockwise to the angle you need.