BE24ECSNK Serie LCD-Monitor Benutzerhandbuch
Erste Ausgabe Februar 2022 Copyright © 2022 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieser Anleitung, inklusive der hierin beschriebenen Produkte und Software, darf ohne ausdrückliche schriftliche Genehmigung der ASUSTeK COMPUTER INC. (“ASUS”) auf irgendeine Weise oder Form reproduziert, übertragen, transkribiert, in Abrufsysteme gespeichert oder in eine andere Sprache übersetzt werden, außer in Form einer im Besitz des Käufers verbleibenden Sicherheitskopie.
Inhaltsverzeichnis Inhaltsverzeichnis........................................................................................ iii Hinweise....................................................................................................... iv TCO-zertifiziert............................................................................................. vi Hinweise zu Ihrer Sicherheit...................................................................... vii Pflegen & Reinigen.................................
Hinweise Erklärung der Federal Communications Commission Dieses Gerät erfüllt Teil 15 der FCC-Regularien. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: • Dieses Gerät darf keine Funkstörungen verursachen, und • Dieses Gerät muss jegliche empfangenen Funkstörungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigtem Betrieb führen können. Dieses Gerät wurde getestet und als mit den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der FCC-Regularien übereinstimmend befunden.
HINWEIS: Energy Star wird unter FreeDOS und Linux-basierten Betriebssystemen nicht unterstützt. Hinweise des Canadian Department of Communications Dieses Digitalgerät überschreitet nicht die Grenzwerte der Klasse B für Funkstörungsemissionen für Digitalgeräte, die in den Radio Interference Regulations des Canadian Department of Communications festgelegt wurden. Dieses Digitalgerät der Klasse B erfüllt die Richtlinien der Canadian ICES-003.
TCO-zertifiziert A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Hinweise zu Ihrer Sicherheit • Lesen Sie sorgfältig die mitgelieferte Dokumentation durch, bevor Sie beginnen, den Monitor einzurichten. • Setzen Sie den Monitor weder Regen noch Feuchtigkeit aus, um einen Brand oder elektrischen Schlag zu vermeiden. • Versuchen Sie niemals das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung innerhalb des Monitors kann ernsthafte Verletzungen verursachen. • Falls das Netzteil defekt ist, versuchen Sie es nicht in eigener Regie zu reparieren.
Das Symbol mit einer durchgestrichenen Abfalltonne auf Rädern bedeutet, dass das Produkt (elektrisches und elektronisches Gerät oder quecksilberhaltige Knopfzelle) nicht mit dem Hausmüll zusammen entsorgt werden darf. Bitte schauen Sie nach örtlichen Vorschriften zur Entsorgung elektronischer Geräte. Pflegen & Reinigen • Es ist ratsam, alle Kabel inklusive Stromkabel zu entfernen, bevor Sie den Monitor hochheben oder verstellen.
Weitere Informationen Nutzen Sie die folgenden Quellen, wenn Sie weitere Informationen zum Produkt und zu Software-Aktualisierungen suchen. 1. ASUS-Websites Die weltweiten ASUS-Websites bieten aktuelle Informationen zu Hardware und Software-Produkten von ASUS. Besuchen Sie die Webseite http://www.asus.com 2. Optionale Dokumentation Ihr Produktpaket kann optionale Dokumentation enthalten, die eventuell von Ihrem Händler hinzugefügt wurde. Diese Dokumente gehören nicht zum Standardlieferumfang.
x
1.1 Willkommen! Vielen Dank für den Kauf eines ASUS®-LCD-Monitors! Der aktuellste Breitbild-LCD-Monitor von ASUS bietet ein breiteres, helleres und kristallklares Bild sowie eine Vielzahl weiterer Funktionen, die die Arbeit mit diesem Produkt zum Vergnügen machen. Durch diese Funktionen können Sie die Bequemlichkeit und das wunderbare visuelle Erlebnis des Monitors genießen! 1.
1.3 Einführung zum Monitor 1.3.1 Frontansicht 8 9 7 6 1. 5 4 3 2 1 Stromschalter/Betriebsanzeige • Mit diese Taste schalten Sie den Bildschirm ein/aus. • Die folgende Tabelle zeigt die Bedeutung der Farben der Betriebsanzeige. 2. Status Beschreibung Weiß Gelb Aus EIN Standby-Modus Aus 5-Wege-Taste: • Zur Anzeige des OSD-Menüs, wenn es ausgeblendet ist. • Zur Aktivierung der ausgewählten OSD-Menüelemente.
• 4. Rufen Sie zum Ändern der Schnelltasten-Funktion das Menü Verknüpfung > Verknüpfung auf. Hörer-Taste: • 5. Zum Annehmen oder Beenden eines Sprach-/Videoanrufs. Mikrofon-stumm-Taste: • 6. Zum De-/Aktivieren der Mikrofon-Stummschaltung. Lautstärke-Taste: • Zur Anzeige des Lautstärkereglers. • Nehmen Sie Anpassungen mit der 5-Wege-Taste vor. • Schalten Sie die Tastensperre ein/aus, indem Sie die zugehörige Taste 5 Sekunden lang gedrückt halten.
1.3.2 Ansicht von hinten 11 1. Ein-/Ausschalter. Zum Ein-/Ausschalten der Stromversorgung. 2. Netzstromeingang. Hier schließen Sie das Netzkabel an. 3. HDMI-Port. Dieser Port dient dem Anschließen eines HDMI-kompatiblen Gerätes. 4. DisplayPort-Eingang. Dieser Port dient dem Anschließen eines DisplayPortkompatiblen Gerätes. 5. USB-3.2-Gen1-Typ-C. Dieser Port dient der Verbindung mit einem USBUpstream-Kabel. Die Verbindung unterstützt USB Stromversorgung und Datenübertragung.
11. USB-3.2-Gen1-Typ A. Diese Ports dienen dem Anschließen von USBGeräten, wie z. B. USB-Tastatur/-Maus, USB-Flash-Laufwerk, etc. Port mit 1.3.3 Symbol ist BC1.2 konform. Weitere Funktionen 1. Daisy-Chaining (bei ausgewählten Modellen) Der Monitor unterstützt Daisy-Chain am DisplayPort.
1-6 Kapitel 1: Übersicht über das Produkt
2.1 Anbringen des Monitorarms/- fußes So bringen Sie die Monitorbasis an: 1. Legen Sie den Monitor mit dem Bildschirm nach unten zeigend auf einen Tisch. 2. Platzieren Sie das Armscharnier der Ständerbaugruppe an seinem Fach an der Rückseite des Monitors. 3. Befestigen Sie den Monitorfuß am Halter; achten Sie darauf, dass die Nase am Halter in der Aussparung am Monitorfuß einrastet. 4. Sichern Sie den Monitorfuß mit Hilfe der mitgelieferten Schraube am Halter.
2.2 Abnehmen des Halters/Fußes (für VESA-Wandmontage) Der Halter/Fuß des Monitors kann zur VESA-Wandmontage abgenommen werden. So entfernen Sie den Halter/Fuß: 1. Legen Sie den Monitor mit dem Bildschirm nach unten zeigend auf einen Tisch. 2. Drücken Sie auf die Freigabetaste und entfernen Sie anschließend den Halter/Fuß vom Monitor. 2 1 Wir empfehlen Ihnen ein weiches Tuch auf den Tisch zu legen, um Schäden an dem Monitor zu vermeiden.
2.
2.4 • • • Anpassen des Bildschirms Schauen Sie bitte auf die volle Fläche des Bildschirms und passen die Position des Bildschirms an, um einen optimalen Blickwinkel zu erhalten. Halten Sie den Monitorfuß fest, damit der Monitor beim Anpassen des Blickwinkels nicht umkippt. Sie können den Winkel des Monitors von +35˚ bis -5˚ einstellen und er ermöglicht die Schwenkverstellung 180˚ (durch Entfernen der Anschlagschraube) von links oder rechts.
2.5 Webcam anpassen • Sie können den Webcam-Winkel auf +10˚ bis -10˚ einstellen. • Die Webcam kann um 180˚ im und 135˚ gegen den Uhrzeigersinn geschwenkt werden. -10° ~ +10° +180° • -135° Verschieben Sie die Blende an der Webcam-Abdeckung an der Oberseite, um das Objektiv zu öffnen oder zu schließen. Entfernen Sie vor der Verwendung die Schutzfolie an der Vorderseite der Webcam.
2.6 Anschließen der Kabel Schließen Sie nach den nachstehenden Anweisungen die Kabel an: • So schließen Sie das Netzkabel an: Verbinden Sie ein Ende des Netzkabels mit dem Netzanschluss des Monitors, das andere Ende verbinden Sie mit einer Steckdose. • So schließen Sie das DisplayPort/HDMI/USB Typ-C*-Kabel an: a. Verbinden Sie ein Ende des DisplayPort/HDMI/USB Typ-C*-Kabels mit dem DisplayPort/HDMI/USB Typ-C-Anschluss des Monitors. b.
USB Type-C RJ45 oder Nach dem Anschluss dieser Kabel können Sie die gewünschte Signalquelle über die Funktion Eingangswahl im OSD-Menü auswählen. Wenn Sie Netzkabel oder Anschlusskabel ersetzen müssen, wenden Sie sich bitte an den ASUS-Kundendienst. 2.7 Einschalten des Monitors Drücken Sie die Ein-/Austaste . Siehe Seite 1-2 für die Position des Stromschalters. Die Betriebsanzeige leucht weiß, wenn der Monitor eingeschaltet ist. 2.
Wenn Sie die Monitor-Webcam als Standardeinstellung einrichten möchten, müssen Sie die im Notebook integrierte Webcam deaktivieren. Zur Identifizierung der im Notebook integrierten Webcam und zu deren Deaktivierung befolgen Sie bitte die nachstehenden Anweisungen: Klicken Sie mit der rechten Maustaste auf USB2.0 HD UVC WebCam, öffnen Sie dann durch Klicken auf Eigenschaften USB2.0 HD UVC WebCam. Klicken Sie auf Details > Eigenschaft und wählen Sie Hardware-IDs.
Bei der BE/C6-Webcam-Serie werden die Monitor-Webcam-Hardware-IDs wie folgt gezeigt: Klicken Sie mit der rechten Maustaste auf die Notebook-Webcam, die andere Hardware-IDs der Monitor-Webcam der BE/C6-Webcam-Serie hat, klicken Sie dann auf Deaktivieren.
Die folgende Meldung wird angezeigt: Klicken Sie auf Ja. Die Notebook-Webcam ist nun deaktiviert und die MonitorWebcam wird als Standardeinstellung genutzt. Starten Sie das Notebook neu. 2.
Klicken Sie auf Sound-Einstellungen öffnen und das Fenster Sound wird angezeigt. Rufen Sie das Sound-Einstellungsfenster auf und wählen Sie dann SoundSystemsteuerung. Falls das USB-Kabel und das HDMI- oder DP-Kabel vom Monitor am Computer angeschlossen sind, klicken Sie auf ASUS BE/C6-Webcam-Serie als Standard einstellen, der Monitorlautsprecher wird als Standardeinstellung genutzt. BE***/C**** in Screenshots steht für den Modellnamen dieses Monitors und kann vom tatsächlichen Design abweichen.
Verlassen Sie durch Klicken auf OK die Sound-Einstellung. Sound-Einstellung ist standardmäßig auf BE/C6-Webcam-Serie eingestellt. Falls nur HDMI- oder DP-Kabel vom Monitor an den Computer angeschlossen ist, markieren Sie ASUS BE/C6-Webcam-Serie als Standard einstellen und der Monitorlautsprecher wird als Standardeinstellung genutzt.
Sound-Einstellung ist standardmäßig auf ASUS BE/C6 eingestellt.
2-14 Kapitel 2: Einrichtung
3.1 Bildschirmmenü (OSD-Menü) 3.1.1 Bedienungsvorgang Splendid ASUS BE24ECSNK Standardmodus DisplayPort 1920 x 1080 @ 60Hz 80W Landschaftsm o d u s Standardmodu s Theatermodus Spi el modus N achtmodus sR GBmodus Lesemodus D unkel kamme r - M o d u s 1. Drücken Sie zum Aktivieren des OSD-Menüs die 2. Bewegen Sie die 5-Wege-Taste zum Navigieren durch die Funktionen nach oben/unten/links/rechts. Heben Sie die gewünschte Funktion hervor und drücken Sie zum Aktivieren die 5-Wege-Taste.
3.1.2 1. Einführung in die OSD-Funktionen Splendid Diese Funktion bietet 8 Modi zur Auswahl. Jeder Modus hat eine Rückstellungsoption, damit Sie Ihre Einstellung behalten bzw. zum voreingestellten Modus zurückkehren können.
2. • Im Standardmodus können die folgenden Funktionen nicht vom Benutzer konfiguriert werden: Sättigung, Hautton, Schärfe, ASCR. • Im sRGBmodus, können die folgenden Funktionen nicht vom Benutzer konfiguriert werden: Helligkeit, Kontrast, Sättigung, Farbtemp., Hautton, Schärfe, ASCR. • Im Lesemodus können die folgenden Funktionen nicht vom Benutzer konfiguriert werden: Kontrast, Sättigung, Farbtemp., Hautton, ASCR.
3. • Augenübungen können bei der Verringerung der Augenbelastung helfen. Wiederholen Sie diese Übungen regelmäßig. Wenn die Augenbelastung weiter anhält, suchen Sie bitte einen Arzt auf. Augenübungen: (1) Schauen Sie wiederholt nach oben und unten (2) Rollen Sie langsam Ihre Augen (3) Bewegen Sie Ihre Augen diagonal. • Hochenergetisches blaues Licht kann zu einer Augenbelastung und AMD (altersbedingte Makuladegeneration) führen. Blaulichtfilter für 70% (max.
4. Bildeinrichtung Über dieses Menü passen Sie die Bildeinstellung an. Bildeinrichtung ASUS BE24ECSNK Standardmodus DisplayPort 1920 x 1080 @ 60Hz 80W Schärfe Trace Free Kontrol l en Vi vi dPi xel AS C R • Schärfe: Der Einstellbereich reicht hier von 0 bis 100. • Trace Free: Passt die Reaktionszeit des Monitors an. • Kontrollen: Passen Sie das Seitenverhältnis auf Vollbild, 4:3, 1:1 (optional) oder Overscan (optional) an. 4:3 ist nur verfügbar, wenn sich die Eingangsquelle im 4:3-Format befindet.
• Lautstärke: der Anpassungsbereich liegt zwischen 0 und 100. • Stummschalten: schaltet den Ton des Monitors ein oder aus. • Quelle: Legt die Quelle der Audioausgabe des Monitors fest. 6. KI Mikrofon Sie können Mikrofon-bezogene Einstellungen anpassen. KI Mikrofon ASUS BE24ECSNK Standardmodus DisplayPort 1920 x 1080 @ 60Hz 80W Geräuschunter d r ü cku n g B eamformi ng • Geräuschunterdrückung: Passt das Niveau der Amplitudenunterstützung mit Ausnahme der Stimme von Nutzern an.
• QuickFit: Sie können direkt am Bildschirm eine Vorschau des Dokumentoder Fotolayouts anzeigen, ohne Testkopien drucken zu müssen. * Gittermuster: Dies vereinfacht Designern und Benutzer die Anordnung von Inhalten und Layout einer Seite; dadurch erhalten sie ein einheitlicheres Aussehen und einen authentischeren Eindruck. Alignment Grid 2 Alignment Grid 1 * Papiergröße: Sie können die Dokumente in realer Größe am Bildschirm anzeigen.
• • • • • • • • • 8. OSD-Einstellungen: * Sie können die OSD-Abschaltzeit auf 10 bis 120 einstellen. * Sie können die DDC/CI-Funktion aktivieren oder deaktivieren. * Sie können den OSD-Hintergrund auf opak bis transparent einstellen.
3.2 Technische Daten Bildschirmtyp Bildschirmgröße Max. Auflösung Pixelabstand Helligkeit (i.d.R.) Kontrastverhältnis (i.d.R.) Kontrastverhältnis (max.) Betrachtungswinkel (H/V) CR>10 Anzeigefarben Ansprechzeit Splendid Video Enhancement Splendid Auswahl Farbtemperaturauswahl Signaleingang Signalausgang Kopfhörerbuchse Audioeingang Lautsprecher (Integriert) USB-3.
Mehrsprachige Menünzeige Zubehör Konformität und Normen 22 Sprachen (Englisch, Französisch, Deutsch, Italienisch, Spanisch, Niederländisch, Portugiesisch, Russisch, Tschechisch, Kroatisch, Polnisch, Rumänisch, Ungarisch, Türkisch, Vereinfachtes Chinesisch, Traditionelles Chinesisch, Japanisch, Koreanisch, Thailändisch, Indonesisch, Persisch, Ukrainisch) Kurzanleitung, Garantiekarte, Netzkabel, HDMIKabel (optional), DisplayPort-Kabel (optional), USB C auf A Kabel (optional), USB C auf USB C Kabel (optiona
Äußere Abmessungen 3.
3.4 Fehlerbehebung (Häufig gestellte Fragen) Problem Mögliche Lösung Die Betriebs-LED leuchtet nicht • Drücken Sie die Taste , um den Monitor einzuschalten. • Prüfen Sie, ob das Netzkabel richtig mit dem Monitor und der Steckdose verbunden ist. • Prüfen Sie, ob das Gerät eingeschaltet ist. Die Betriebs-LED leuchtet orange, und • Prüfen Sie, ob der Monitor sowie der Computer kein Bild erscheint im normalen Betriebszustand ist.
3.
Wenn der Monitor im Videomodus betrieben wird (d.h. keine Daten anzeigt), werden die folgenden hochauflösenden Modi zusätzlich zum normalauflösenden Video unterstützt.