User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit (BE24EQSK)
- 2.4 Adjusting the monitor
- 2.5 Adjusting the webcam
- 2.6 Connecting the cables
- 2.7 Turning on the monitor
- 2.8 Setting up the monitor webcam as default setting
- 2.9 Setting up the monitor speaker as default setting
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-4 Chapter 1: Product introduction
1.3.2 Back view
BE24EQK BE24EQSK
1. Kensington lock slot.
2. Power switch. Press the switch to turn on/off power.
3. AC-IN port. This port connects the power cord.
4. Audio-in port. This port connects PC audio source by the bundled audio
cable.
5. Earphone jack. This port is only available when an HDMI/DisplayPort cable
is connected.
6. DisplayPort in. This port is for connection with a DisplayPort compatible
device.
7. HDMI port. This port is for connection with an HDMI compatible device.
8. VGA port. This 15-pin port is for PC VGA connection.
9. USB upstream port. This port is for connection with a USB upstream cable.
The connection enables the built-in webcam on the monitor.