BE24E Serie LCD-Monitor Benutzerhandbuch
Erste Ausgabe Februar 2020 Copyright © 2020 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieser Anleitung, inklusive der hierin beschriebenen Produkte und Software, darf ohne ausdrückliche schriftliche Genehmigung der ASUSTeK COMPUTER INC. (“ASUS”) auf irgendeine Weise oder Form reproduziert, übertragen, transkribiert, in Abrufsysteme gespeichert oder in eine andere Sprache übersetzt werden, außer in Form einer im Besitz des Käufers verbleibenden Sicherheitskopie.
Inhaltsverzeichnis Inhaltsverzeichnis........................................................................................ iii Hinweise....................................................................................................... iv Hinweise zu Ihrer Sicherheit...................................................................... vii Pflegen & Reinigen.................................................................................... viii Rücknahmeservices.......................................
Hinweise Erklärung der Federal Communications Commission Dieses Gerät erfüllt Teil 15 der FCC-Regularien. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: • Dieses Gerät darf keine Funkstörungen verursachen, und • Dieses Gerät muss jegliche empfangenen Funkstörungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigtem Betrieb führen können. Dieses Gerät wurde getestet und als mit den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der FCC-Regularien übereinstimmend befunden.
HINWEIS: Energy Star wird unter FreeDOS und Linux-basierten Betriebssystemen nicht unterstützt. Hinweise des Canadian Department of Communications Dieses Digitalgerät überschreitet nicht die Grenzwerte der Klasse B für Funkstörungsemissionen für Digitalgeräte, die in den Radio Interference Regulations des Canadian Department of Communications festgelegt wurden. Dieses Digitalgerät der Klasse B erfüllt die Richtlinien der Canadian ICES-003.
A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice.
Hinweise zu Ihrer Sicherheit • Lesen Sie sorgfältig die mitgelieferte Dokumentation durch, bevor Sie beginnen, den Monitor einzurichten. • Setzen Sie den Monitor weder Regen noch Feuchtigkeit aus, um einen Brand oder elektrischen Schlag zu vermeiden. • Versuchen Sie niemals das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung innerhalb des Monitors kann ernsthafte Verletzungen verursachen. • Falls das Netzteil defekt ist, versuchen Sie es nicht in eigener Regie zu reparieren.
Das Symbol mit einer durchgestrichenen Abfalltonne auf Rädern bedeutet, dass das Produkt (elektrisches und elektronisches Gerät oder quecksilberhaltige Knopfzelle) nicht mit dem Hausmüll zusammen entsorgt werden darf. Bitte schauen Sie nach örtlichen Vorschriften zur Entsorgung elektronischer Geräte. Pflegen & Reinigen • Es ist ratsam, alle Kabel inklusive Stromkabel zu entfernen, bevor Sie den Monitor hochheben oder verstellen.
Weitere Informationen Nutzen Sie die folgenden Quellen, wenn Sie weitere Informationen zum Produkt und zu Software-Aktualisierungen suchen. 1. ASUS-Websites Die weltweiten ASUS-Websites bieten aktuelle Informationen zu Hardware und Software-Produkten von ASUS. Besuchen Sie die Webseite http://www.asus.com 2. Optionale Dokumentation Ihr Produktpaket kann optionale Dokumentation enthalten, die eventuell von Ihrem Händler hinzugefügt wurde. Diese Dokumente gehören nicht zum Standardlieferumfang.
x
1.1 Willkommen! Vielen Dank für den Kauf eines ASUS®-LCD-Monitors! Der aktuellste Breitbild-LCD-Monitor von ASUS bietet ein breiteres, helleres und kristallklares Bild sowie eine Vielzahl weiterer Funktionen, die die Arbeit mit diesem Produkt zum Vergnügen machen. Durch diese Funktionen können Sie die Bequemlichkeit und das wunderbare visuelle Erlebnis des Monitors genießen! 1.
1.3 Einführung zum Monitor 1.3.1 Frontansicht 8 9 7 7 BE24EQK BE24EQSK 6 1. 1-2 4 3 2 1 Stromschalter/Betriebsanzeige • Mit diese Taste schalten Sie den Bildschirm ein/aus. • Die folgende Tabelle zeigt die Bedeutung der Farben der Betriebsanzeige. 2. 3. 5 Status Beschreibung Weiß Gelb Aus EIN Standby-Modus Aus Menü-Taste: • Drücken Sie auf diese Taste, um das OSD-Menü anzuzeigen, wenn das OSD deaktiviert ist. • Ruft das OSD-Menü auf.
• Drücken Sie auf diese Taste, um das OSD-Menü anzuzeigen, wenn das OSD deaktiviert ist. • Schließt das OSD-Menü. 4. Mikrofon-stumm-Taste: • 5. Zum De-/Aktivieren der Mikrofon-Stummschaltung. Verknüpfung • Drücken Sie auf diese Taste, um das OSD-Menü anzuzeigen, wenn das OSD deaktiviert ist. • Standard: Helligkeit-Schnelltaste • Wählen Sie zum Ändern der Schnelltastenfunktion das Menü Verknüpfung > Verknüpfung 1. 6.
1.3.2 Ansicht von hinten BE24EQK 1. Schlitz für Kensington-Schloss. 2. Ein-/Ausschalter. Zum Ein-/Ausschalten der Stromversorgung. 3. Netzstromeingang. Hier schließen Sie das Netzkabel an. 4. Audioeingang. An diesen Anschluss wird die PC-Audioquelle mit dem im Lieferumfang enthaltenen Audiokabel angeschlossen. 5. Kopfhöreranschluss. Dieser Anschluss steht nur zur Verfügung, wenn ein HDMI-/DisplayPort-Kabel angeschlossen ist. DisplayPort-Eingang.
2.1 Anbringen des Monitorarms/- fußes So bringen Sie die Monitorbasis an: 1. Legen Sie den Monitor mit dem Bildschirm nach unten zeigend auf einen Tisch. 2. Platzieren Sie das Armscharnier der Ständerbaugruppe an seinem Fach an der Rückseite des Monitors (bei ausgewählten Modellen). 3. Befestigen Sie den Monitorfuß am Halter; achten Sie darauf, dass die Nase am Halter in der Aussparung am Monitorfuß einrastet. 4. Sichern Sie den Monitorfuß mit Hilfe der mitgelieferten Schraube am Halter.
2.2 Abnehmen des Halters/Fußes (für VESA-Wandmontage) Der Halter/Fuß des Monitors kann zur VESA-Wandmontage abgenommen werden. So entfernen Sie den Halter/Fuß: BE24EQK 1. Legen Sie den Monitor mit der Vorderseite nach vorne auf einen Tisch. 2. Entfernen Sie die Gummis in den vier Schraubenlöchern. (Abbildung 1) 3. Entfernen Sie die Basis (Abbildung 2). 4. Entfernen Sie mit einem Schraubendreher die Schraube am Scharnier (Abbildung 3), entfernen Sie dann das Scharnier.
2.
2.4 • Anpassen des Bildschirms Schauen Sie bitte auf die volle Fläche des Bildschirms und passen die Position des Bildschirms an, um einen optimalen Blickwinkel zu erhalten. Halten Sie den Monitorfuß fest, damit der Monitor beim Anpassen des Blickwinkels nicht umkippt. BE24EQK: Der empfohlene Einstellwinkel ist +20 bis -5° BE24EQSK: Sie können den Winkel des Monitors von +35˚ bis -5˚ einstellen und er ermöglicht die Schwenkverstellung 180˚ (durch Entfernen der Anschlagschraube) von links oder rechts.
0° -5° ~ +35° - 90° 0° 90°  Beim Einstellen des Betrachtungswinkels ist es normal, dass Monitor und Bild etwas wackeln können. 2.5 Webcam anpassen • Sie können den Webcam-Winkel auf +10˚ bis -10˚ einstellen. • Die Webcam kann um 180˚ im und 135˚ gegen den Uhrzeigersinn geschwenkt werden. -10° ~ +10° +180° -135° BE24EQK • BE24EQSK Verschieben Sie die Blende an der Webcam-Abdeckung an der Oberseite, um das Objektiv zu öffnen oder zu schließen.
2.6 Anschließen der Kabel Schließen Sie nach den nachstehenden Anweisungen die Kabel an: BE24EQK 2-6 BE24EQSK • So schließen Sie das Netzkabel an: Verbinden Sie ein Ende des Netzkabels mit dem Netzanschluss des Monitors, das andere Ende verbinden Sie mit einer Steckdose. • So schließen Sie das VGA/DisplayPort/HDMI-Kabel an: a. Verbinden Sie ein Ende des VGA/DisplayPort/HDMI-Kabels mit dem VGA/DisplayPort/HDMI-Anschluss des Monitors. b.
USB Nach dem Anschluss dieser Kabel können Sie die gewünschte Signalquelle über die Funktion Eingangswahl im OSD-Menü auswählen. 2.7 Einschalten des Monitors Drücken Sie die Ein-/Austaste . Siehe Seite 1-2 für die Position des Stromschalters. Die Betriebsanzeige leucht weiß, wenn der Monitor eingeschaltet ist. 2.
Klicken Sie mit der rechten Maustaste auf USB2.0 HD UVC WebCam, öffnen Sie dann durch Klicken auf Eigenschaften USB2.0 HD UVC WebCam. Klicken Sie auf Details > Eigenschaft und wählen Sie Hardware-IDs.
Bei der BE/C6-Webcam-Serie werden die Monitor-Webcam-Hardware-IDs wie folgt gezeigt: Klicken Sie mit der rechten Maustaste auf die Notebook-Webcam, die andere Hardware-IDs der Monitor-Webcam der BE/C6-Webcam-Serie hat, klicken Sie dann auf Deaktivieren. Die folgende Meldung wird angezeigt: Klicken Sie auf Ja. Die Notebook-Webcam ist nun deaktiviert und die MonitorWebcam wird als Standardeinstellung genutzt. Starten Sie das Notebook neu.
2.9 Monitorlautsprecher als Standardeinstellung einrichten Wenn Ihr Computer mit mehreren Lautsprechern verbunden ist, befolgen Sie zur Einrichtung des Monitorlautsprechers als Standardeinstellung bitte die nachstehenden Anweisungen: Klicken Sie mit der rechten Maustaste im Infobereich der WindowsTaskleiste auf Lautstärke. Klicken Sie auf Sound-Einstellungen öffnen und das Fenster Sound wird angezeigt. Rufen Sie das Sound-Einstellungsfenster auf und wählen Sie dann SoundSystemsteuerung.
Falls das USB-Kabel und das HDMI- oder DP-Kabel vom Monitor am Computer angeschlossen sind, klicken Sie auf ASUS BE/C6-Webcam-Serie als Standard einstellen, der Monitorlautsprecher wird als Standardeinstellung genutzt. Verlassen Sie durch Klicken auf OK die Sound-Einstellung. Sound-Einstellung ist standardmäßig auf BE/C6-Webcam-Serie eingestellt.
Falls nur HDMI- oder DP-Kabel vom Monitor an den Computer angeschlossen ist, markieren Sie ASUS BE/C6-Webcam-Serie als Standard einstellen und der Monitorlautsprecher wird als Standardeinstellung genutzt. Sound-Einstellung ist standardmäßig auf ASUS BE/C6 eingestellt.
3.1 Bildschirmmenü (OSD-Menü) 3.1.1 Bedienungsvorgang ASUS BE24E Standardmodus DisplayPort 1920 x 1080 @ 60Hz Splendid Landschaftsmodus Standardmodus Theatermodus Spielmodus Nachtmodus sRGBmodus Lesemodus Dunkelkammer-Modus 1. Drücken Sie eine Taste (außer der Ein/Aus-Taste), um das OSD-Menü anzuzeigen. 2. Drücken Sie auf die 3. Drücken Sie auf die Tasten, die auf dem Bildschirm angezeigt werden, um durch die Funktionen zu steuern.
3.1.2 1. Einführung in die OSD-Funktionen Splendid Diese Funktion bietet 7~8 Modi zur Auswahl. Jeder Modus hat eine Rückstellungsoption, damit Sie Ihre Einstellung behalten bzw. zum voreingestellten Modus zurückkehren können.
2. Blaulichtfilter Mit dieser Funktion können Sie die Stufe des Blaulichtfilters anpassen. Blaulichtfilter ASUS BE24E Standardmodus DisplayPort 1920 x 1080 @ 60Hz S tu fe 0 S tu fe 1 S tu fe 2 S tu fe 3 S tu fe 4 • Stufe 0: Keine Änderung. • Stufe 1~4: Je höher die Stufe, desto weniger blaues Licht wird gestreut. Wenn der Blaulichtfilter aktiviert ist, werden die Standardeinstellungen des Standardmodus automatisch importiert.
3. Farbe Legen Sie über dieses Menü eine gewünschte Farbeinstellung fest. Farbe ASUS BE24E Standardmodus DisplayPort 1920 x 1080 @ 60Hz He ll i gkei t Ko ntrast Sä tti gung F a rbtemp. Ha utton • Helligkeit: Der Einstellbereich reicht hier von 0 bis 100. • Kontrast: Der Einstellbereich reicht hier von 0 bis 100. • Sättigung: Der Einstellbereich reicht hier von 0 bis 100. • Farbtemp.: Enthält die 4 Modi Kühl, Normal, Warm und Anwendermodus.
• VividPixel: Verbessert die Kontur des angezeigten Bildes und erzeugt hochwertige Bilder am Bildschirm. • ASCR: Hier können Sie die Funktion ASCR (ASUS Smart Contrast Ratio) ein-/ausschalten. • Position (Nur für VGA-Eingang verfügbar): Hier können Sie die horizontale Position (H-Position) und die vertikale Position (V-Position) des Bildes einstellen. Der Einstellbereich reicht hier von 0 bis 100.
6. Eingangswahl Mit dieser Funktion können Sie Ihre bevorzugte Eingangsquelle auswählen. Eingangswahl ASUS BE24E Standardmodus DisplayPort 1920 x 1080 @ 60Hz VGA HD MI Displ ayP ort 7. System-Einstellungen Ermöglicht Ihnen die Anpassung des Systems.
* Gittermuster: Dies vereinfacht Designern und Benutzer die Anordnung von Inhalten und Layout einer Seite; dadurch erhalten sie ein einheitlicheres Aussehen und einen authentischeren Eindruck. Alignment Grid 2 Alignment Grid 1 * Papiergröße: Sie können die Dokumente in realer Größe am Bildschirm anzeigen.
* Sie können den OSD-Hintergrund auf opak bis transparent einstellen. • Sprache: Sie können aus 21 Sprachen auswählen: Englisch, Französisch, Deutsch, Italienisch, Spanisch, Niederländisch, Portugiesisch, Russisch, Tschechisch, Kroatisch, Polnisch, Rumänisch, Ungarisch, Türkisch, Vereinfachtes Chinesisch, Traditionelles Chinesisch, Japanisch, Koreanisch, Thailändisch, Indonesisch, Persisch. • Tastensperre: Zur Deaktivierung aller Funktionstasten.
3.2 Technische Daten BE24EQK Bildschirmtyp Bildschirmgröße Max. Auflösung Pixelabstand Helligkeit (i.d.R.) Kontrastverhältnis (i.d.R.) Kontrastverhältnis (max.) Betrachtungswinkel (H/V) CR>10 Anzeigefarben Ansprechzeit SplendidPlus Video Enhancement SplendidPlus Auswahl Autom. Einstellung Farbtemperaturauswahl Analoger Eingang Digitaleingang Digitaler Ausgang Kopfhörerbuchse Audioeingang Lautsprecher (Integriert) USB 3.
Mehrsprachige Menünzeige Zubehör Konformität und Normen 21 Sprachen (Englisch, Französisch, Deutsch, Italienisch, Spanisch, Niederländisch, Portugiesisch, Russisch, Tschechisch, Kroatisch, Polnisch, Rumänisch, Ungarisch, Türkisch, Vereinfachtes Chinesisch, Traditionelles Chinesisch, Japanisch, Koreanisch, Thailändisch, Indonesisch, Persisch) Kurzanleitung, Garantiekarte, Netzkabel, HDMIKabel (optional), DisplayPort-Kabel (optional), VGA-Kabel (optional), USB-B-zu-A-Kabel (optional), Audiokabel (optional)
Farbe Betriebs-LED Kippen Drehpunkt Schwenken Höhenverstellung Kensington-Schloss Netzeingangsspannung Stromverbrauch Temperatur (in Betrieb) Temperatur (nicht in Betrieb) Abmessungen (B x H x T) ohne Ständer Abmessungen (B x H x T) mit Ständer Gewicht (ungefähr) Mehrsprachige Menünzeige Zubehör Konformität und Normen Schwarz weiß (Ein)/Bernstein (Standby) +35˚~ -5˚ +90˚~ -90˚ +180˚~ -180˚ 130 mm Ja Wechselstrom: 100 ~ 240 V Eingeschaltet: < 15 W** (i.d.R.), Bereitschaft: < 0,5 W (i.d.R.
Webcam/Swivel: 6.33 [0.25] Clockwise 180 Degree Counterclockwise 135 Degree 135 ° 25.10 [0.99] 10° Webcam/Tilt:-10~10 Degree 10° 52.80 [2.08] 100.00 [3.94] M4*4-Depth 10 mm 70.00 [2.76] Wall mount Keep out area 100.00 [3.94] 180° 17.70 [0.70] 71.06 [2.80] 539.70 [21.25] 527.04 (20.75)-Active-Area 194.95 [7.68] ASUS C424EQK/BE24EQK Outline Dimension *Unit: mm(inch) 5° 20.00 [0.79] Tilt: -5~20 Degree 20° 6.33 [0.25] 62.35 [2.45] 194.95 [7.68] 106.00 [4.17] 13.98 [0.55] 65.00 [2.
BE24EQSK ASUS LCD-Monitor der Serie BE 3-13
3.4 Fehlerbehebung (Häufig gestellte Fragen) Problem Mögliche Lösung Die Betriebs-LED leuchtet nicht • Drücken Sie die Taste , um den Monitor einzuschalten. • Prüfen Sie, ob das Netzkabel richtig mit dem Monitor und der Steckdose verbunden ist. • Prüfen Sie, ob das Gerät eingeschaltet ist. Die Betriebs-LED leuchtet orange, und • Prüfen Sie, ob der Monitor sowie der Computer kein Bild erscheint im normalen Betriebszustand ist.
Es gibt keinen Ton, oder die Lautstärke ist zu niedrig 3.5 • Stellen Sie sicher, dass das HDMI/DisplayPortKabel korrekt mit Monitor und Computer verbunden ist. • Ändern Sie die Lautstärkeeinstellung des Monitors und des HDMI/DisplayPortGerätes. • Stellen Sie sicher, dass die Soundkarte und nötige Treiber richtig im Computer installiert und aktiviert sind.
1280x1024 1360x768 1366x768 1440x900 1600x1200 1680x1050 1920x1080 79,98(P) 47,712(P) 47,712(P) 55,94(N) 75,00(P) 65,29(P) 67,5(P) 75,02(N) 59,79(P) 59,79(P) 59,89(P) 60,00(P) 60,00(P) 60,00(P) 135 85,5 85,5 106,5 162 146,25 148,5 * "P" / "N" steht für "Positiv" / "Negativ" Polarität des eingehenden H-Sync/V-Sync (Eingangstiming). Wenn der Monitor im Videomodus betrieben wird (d.h. keine Daten anzeigt), werden die folgenden hochauflösenden Modi zusätzlich zum normalauflösenden Video unterstützt.