User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit
- 2.4 Adjusting the monitor
- 2.5 Adjusting the webcam
- 2.6 Connecting the cables
- 2.7 Turning on the monitor
- 2.8 Setting up the monitor webcam as default setting
- 2.9 Setting up the monitor speaker as default setting
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-1ASUS BE27ACSBK Series LCD Monitor
3.1 OSD (On-Screen Display) menu
3.1.1 How to reconfigure
ASUS BE27ACSBK
Standard Mode DisplayPort 2560 x 1440 @ 60Hz 80W
Splendid
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB Mode
Reading Mode
Darkroom Mode
1. Press the 5-way button to activate the OSD menu.
2. Move the 5-way button up/down/left/right to navigate through the
functions. Highlight the desired function and press the 5-way button to
activate it. If the function selected has a sub-menu, move the 5-way
button up/down to navigate through the sub-menu functions. Highlight the
desired sub-menu function and press the 5-way button or move the
5-way button to activate it.
3. Move the 5-way button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the button or move the 5-way
left repeatedly until the OSD menu disappears. To adjust other functions,
repeat steps 1-3.
When USB Type-C port is connected and power delivery is enabled, the status
of power delivery will be shown on the top right corner of OSD menu and on the
OSD Information page. Please note that the tolerance is within +/-20%.