User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit
- 2.4 Adjusting the monitor
- 2.5 Adjusting the webcam
- 2.6 Connecting the cables
- 2.7 Turning on the monitor
- 2.8 Setting up the monitor webcam as default setting
- 2.9 Setting up the monitor speaker as default setting
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-6 Chapter 3: OSD (On-Screen Display) menu
• Trace Free: Adjusts the response time of the monitor.
• Aspect Control: Adjusts the aspect ratio to full, 4:3, 1:1 (optional) or
OverScan (optional).
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
• VividPixel: Enhances the outline of the displayed picture and generates
high-quality images on screen.
• ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
5. Sound
You can adjust Volume, Mute and Source from this menu.
Volume
Mute
Source
Sound
ASUS BE27ACSBK
Standard Mode DisplayPort 2560 x 1440 @ 60Hz 80W
• Volume: the adjusting range is from 0 to 100.
• Mute: toggles the monitor sound between on and off.
• Source: decides the monitor sound comes from which source.