User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit
- 2.4 Adjusting the monitor
- 2.5 Adjusting the webcam
- 2.6 Connecting the cables
- 2.7 Turning on the monitor
- 2.8 Setting up the monitor webcam as default setting
- 2.9 Setting up the monitor speaker as default setting
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-4 Chapter 1: Product introduction
This monitor is Super-Speed USB 3.1 compatible (5Gbps). The port offers Max.
80W power delivery with output voltage 5V/3A, 9V/3A, 12V/3A, 15V/3A and
20V/4A. Connecting the USB Type-C cable can input the DisplayPort source,
output power and enable the USB Type-A ports (downstream) on the monitor.
Connecting the USB Type-C to Type-A cable only enables the USB Type-A
ports (downstream) on the monitor.
6. Daisy-Chain DisplayPort output. This port allows you to connect multiple
DisplayPort compatible monitors.
7. USB 3.1 Type A. These ports are for connection with USB devices, such as
USB keyboard/mouse, USB ash drive, etc.
8. Earphone jack. This port is only available when an HDMI/DisplayPort/USB
Type-C cable is connected.
9. Kensington lock slot.
10. USB 3.1 Type A. These ports are for connection with USB devices, such as
USB keyboard/mouse, USB ash drive, etc.
Port with icon is BC1.2 compliant.