User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit
- 2.4 Adjusting the monitor
- 2.5 Adjusting the webcam
- 2.6 Connecting the cables
- 2.7 Turning on the monitor
- 2.8 Setting up the monitor webcam as default setting
- 2.9 Setting up the monitor speaker as default setting
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
2-4 Chapter 2: Setup
2.4 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from +35˚ to -5˚and it allows 180˚ swivel
adjustment (by removing the stop screw) from either left or right. You can also
adjust the monitor’s height within +/- 150 mm.
180°
0°
180°
-5° ~ +35°
150mm
(Swivel)
(Height adjustment)
(Tilt)
Pivoting the monitor
1. Lift the monitor to the highest position.
2. Tilt the monitor to its maximum angle.
3. Pivot the monitor clockwise/counterclockwise to the angle you need.
0°
90°
0°
- 90°
-5° ~ +35°
It is normal that the monitor slightly shakes while you adjust the viewing angle.