Download
24
IMPORTANT! You rst need to create a share account and its
permission /access rights to allow other network clients to access the
USB device via an FTP site/third-party FTP client utility, Servers Center,
Samba, or AiCloud 2.0. For more details, refer to the section 3.6 Using
the USB Application and 3.7 Using AiCloud 2.0 in this user manual.
To monitor your USB device:
1. From the navigation panel, go to General > Network Map.
2. OntheNetworkMapscreen,selecttheUSB Disk Status icon to
display your USB device’s information.
3. OntheAiDiskWizardeld,clickGOtosetupanFTPserverfor
Internetlesharing.
NOTES:
• Formoredetails,refertothesection3.6.2 Using Servers Center in
this user manual.
• ThewirelessrouterworkswithmostUSBHDDs/Flashdisks(upto2TB
size) and supports read-write access for FAT16, FAT32, EXT2, EXT3,
and NTFS.