Specifications

Router Internet Setup

N150 Wireless ADSL2+ Modem Router DGN1000

Setup Wizard

If you do not use the NETGEAR Genie, you have to log in to the modem router to set the

country, language, and Internet connection.

Note: If you performed the NETGEAR Genie setup, the country, language,

Internet, and wireless network settings are already configured.

 To run the Setup Wizard

1. Select Setup Wi

zard from the top of the router menus to display the following screen:

2. Select your country and language:

• Country. It is import

ant to specify the location where the wireless modem router

operates so that the Internet connection works correctly. Defaults to UK.

• Language. Defaults to English. You can select anot

her language if you prefer.

3. Select either Ye

s or No, I want to configure the Router myself. If you select No, proceed

to Manual Setup (Basic Settings) on pa

ge 25.

4. If you selected Ye

s, click Next.

With automatic Internet detection, the Setup Wi

zard searches your Internet connection

for servers and protocols to determine your ISP configuration.

Note: The Setup Wizard cannot detect a Point-to-Point Tunneling Protocol

(PPTP) connection. If your ISP uses PPTP, you have to set your

Internet connection through the screen described in

Manual Setup

(Basic Settings) described on 25.