Specifications

Advanced Settings

N150 Wireless ADSL2+ Modem Router DGN1000

Note: If your ISP assigns a private WAN IP address such as 192.168.x.x

or 10.x.x.x, the Dynamic DNS service will not work because private

addresses are not routed on the Internet.

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as DHCP and Routing

Information Protocol (RIP). The wireless modem router is shipped preconfigured to use

private IP addresses on the LAN side and to act as a DHCP server. The wireless modem

router’s default LAN IP configuration is as follows:

• LAN IP address. 1

92.168.0.1

• Subnet mask. 255.255.255.0

These add

resses are part of the private address range designated by the Internet

Engineerin

g Task Force (IETF http://www.ietf.org/) for use in private networks, and should be

suitable in most applications. If your network has a requ

irement to use a different IP

addressing scheme, you can make those changes in the LAN IP Setup screen.

Note: If you change the LAN IP address of the wireless modem router

while connected through the browser, you are disconnected. To

reconnect, open a new connection to the new IP address and log in.

 To set up the LAN:

1. Select Advanced > LA

N Setup.

2. Enter the LAN Setup configuration and click Apply to save your changes.