User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 CPU Configuration
- 4.4.4 Graphics Configuration
- 4.4.5 Watchdog Timer
- 4.4.6 AMT Configuration (on selected models)
- 4.4.7 Super IO Configuration
- 4.4.8 Serial Console Redirection
- 4.4.9 SATA configuration
- 4.4.10 VMD setup menu
- 4.4.11 Network Stack Configuration
- 4.4.12 USB Configuration
- 4.4.13 NVMe Configuration
- 4.4.14 Onboard Devices Configuration
- 4.4.15 APM Configuration
- 4.4.16 EZ-Flash
- 4.5 Hardware Monitor menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 MEBx menu
- 4.10 Updating your BIOS
- Appendix
Single Board Computer
11
Audio
Realtek ALC897 High Denition Audio CODEC
Rear I/O
1 x DisplayPort
2 x HDMI port
4 x USB 3.2 Gen 2 Type-A ports
2 x RJ-45 LAN ports
Internal connectors
4 x Serial ports
(2 x RS-232/422/485, 1 x RS-232, 1 x RS232)
1 x USB 2.0 connectors
(supports additional 2 USB 2.0 ports)
1 x 4-pin Chassis fan connector
1 x Chassis in
trusion connector
1 x Front panel audio connector (AAFP)
1 x Front panel connector
1 x SATA power connector
1 x SMBus connector
1 x I2C connector
1 x Power connector (4-pin)
1 x GPIO connector (8-bit)
1 x Speaker connector (4-pin)
(supported by 3 watt/channel amplier IC)
1 x Battery c
onnector (2-pin)
1 x Clear CMOS jumper
Watchdog Timer (H/W)
Yes
Security
1 x SPI TPM connector
Power Supply
DC 9-36V
Operating System
Windows® 10 (64bit )
Win10 Iot Enterprise
Ubuntu
RedHat Enterprise
Fedora Workstation
OpenSUSE
Environment
Operating Temperature: -20°C ~ 60°C
Non-operating Temperature: -40°C ~ 85°C
NOTE: Specications are subject to change without notice.