User Manual

82 Single Board Computer
Secure Boot
Secure Boot can be enabled if the system is running in User mode with
enrolled platform Key (EPK) or if the CSM function is disabled.
Conguration options: [Disabled] [Enabled]
Secure Boot Mode
In Custom Mode, the secure boot policy variables can be congured by a
physically present user without full authentication.
Conguration options: [Standard] [Custom]
Key Management
The Key Management item allows you to modify Secure Boot variables and
set Key Management page.
Platform Key (PK)
Conguration options: [Details] [Export] [Update] [Delete]
Key Exchange Keys / Authorized Signatures / Forbidden Signatures
Conguration options: [Details] [Export] [Update] [Append] [Delete]
HDD Security Conguration
The HDD Security Conguration item allows you to set up passwords to
protect your HDD.
NOTE: This item is only available when you have a SATA HDD
connected.
To set a password for your HDD:
1. Select the HDD Security Conguration item and press <Enter>.
2. Select the Set Master Password item and press <Enter>.
3. From the Create New Password box, key in a password, then press
<Enter>.
4. Conrm the password when prompted.
5. Select the User Password item and press <Enter>.
6. From the Create New Password box, key in a password, then press
<Enter>.
7. Conrm the password when prompted.