User's Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 System Agent (SA) Configuration
- 4.4.6 PCH-IO Configuration
- 4.4.7 PCH Storage Configuration
- 4.4.8 Onboard Devices Configuration
- 4.4.9 ACPI Settings
- 4.4.10 APM Configuration
- 4.4.11 NCT6116D Super IO Configuration
- 4.4.12 NCT6116D HW Monitor
- 4.4.13 Serial Port Console Redirection
- 4.4.14 USB Configuration
- 4.4.15 Network Stack Configuration
- 4.4.16 NVMe Configuration
- 4.4.17 SDIO Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
Single Board Computer
53
OS Type
[Windows UEFI mode] Allows you to select your installed operating system.
Execute the Microsoft® Secure Boot check. Only
select this option when booting on Windows® UEFI
mode or other Microsoft® Secure Boot compliant OS.
[Other OS] Get the optimized function when booting on
Windows® non-UEFI mode. Microsoft® Secure Boot
only supports Windows® UEFI mode.
4.4.1 PCH-FW Conguration
The items in this menu allow you to congure Management Engine
Technology Parameters.
TPM Device Selection
This item allows you to select the TPM device.
[Discrete TPM] Disables PTT in SkuMgr.
[Firmware TPM] Enables PTT in SKUMgr.
WARNING! When [Firmware TPM] is selected, PTT/Discrete TPM will be
disabled and all data saved on it will be lost.