User's Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 System Agent (SA) Configuration
- 4.4.6 PCH-IO Configuration
- 4.4.7 PCH Storage Configuration
- 4.4.8 Onboard Devices Configuration
- 4.4.9 ACPI Settings
- 4.4.10 APM Configuration
- 4.4.11 NCT6116D Super IO Configuration
- 4.4.12 NCT6116D HW Monitor
- 4.4.13 Serial Port Console Redirection
- 4.4.14 USB Configuration
- 4.4.15 Network Stack Configuration
- 4.4.16 NVMe Configuration
- 4.4.17 SDIO Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
Single Board Computer
55
Pending operation
Allows you to schedule an operation for the Security Device.
Conguration options: [None] [TPM Clear]
NOTE: Your computer will reboot during restart in order to change the
state of Security Device.
Platform Hierarchy
Allows you enable or disable the Platform Hierarchy.
Conguration options: [Disabled] [Enabled]
Storage Hierarchy
Allows you enable or disable the Storage Hierarchy.
Conguration options: [Disabled] [Enabled]
Endorsement Hierarchy
Allows you enable or disable the Endorsement Hierarchy.
Conguration options: [Disabled] [Enabled]
TPM2.0 UEFI Spec Version
Allows you to select the TCG2 spec version support.
[TCG_1_2] Compatible mode for Windows 8
®
/ Windows
®
10.
[TCG_2] Supports new TCG2 protocol and event format for Windows
®
10
or later.
Physical Presence Spec Version
Select to tell the OS to support PPI Spec Version 1.2 or 1.3.
Conguration options: [1.2] [1.3]
NOTE: Some HCK tests might not support version 1.3.