User's Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 System Agent (SA) Configuration
- 4.4.6 PCH-IO Configuration
- 4.4.7 PCH Storage Configuration
- 4.4.8 Onboard Devices Configuration
- 4.4.9 ACPI Settings
- 4.4.10 APM Configuration
- 4.4.11 NCT6116D Super IO Configuration
- 4.4.12 NCT6116D HW Monitor
- 4.4.13 Serial Port Console Redirection
- 4.4.14 USB Configuration
- 4.4.15 Network Stack Configuration
- 4.4.16 NVMe Configuration
- 4.4.17 SDIO Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
60
Single Board Computer
4.4.5 System Agent (SA) Conguration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Graphics Conguration
This item allows you to select a primary display from CPU and PCIe graphical
devices.
Graphics Turbo IMON Current
This item allows you to set the Graphics Turbo IMON supported current
values
Conguration options: [14] - [31]
Skip Scanning of External Gfx Card
If set to [Enabled], it will not scan for External Gfx Card on PEG and PCH
PCIe Ports.
Conguration options: [Disabled] [Enabled]
External Gfx Card Primary Display Conguration
Primary PEG
This item allows you to select PEG. Graphics device should be
Primary PEG.
Conguration options: [Auto] [PEG11] [PEG12]
Primary PCIE
This item allows you to select PCIE. Graphics device should be
Primary PEG.
Conguration options: [Auto] [PCIE1] - [PCIE19]