User's Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 System Agent (SA) Configuration
- 4.4.6 PCH-IO Configuration
- 4.4.7 PCH Storage Configuration
- 4.4.8 Onboard Devices Configuration
- 4.4.9 ACPI Settings
- 4.4.10 APM Configuration
- 4.4.11 NCT6116D Super IO Configuration
- 4.4.12 NCT6116D HW Monitor
- 4.4.13 Serial Port Console Redirection
- 4.4.14 USB Configuration
- 4.4.15 Network Stack Configuration
- 4.4.16 NVMe Configuration
- 4.4.17 SDIO Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
62
Single Board Computer
NOTE: The following items appear only when IGD Flat Panel is set to
[LFP].
Backlight Brightness
This item allows you to set VBIOS Brightness.
Conguration options: [0] - [255]
Backlight Control
This item allows you to set Back Light Control Setting.
Conguration options: [PWM Inverted] [PWM Normal]
Channel Select
Conguration options: [Dual Channel] [Single Channel]
Mode select
Conguration options: [8bit Mode(JEIDA)] [8bit Mode(VESA)] [6bit
Mode(VESA and JEIDA)]
Panel Power Sequence Control
Conguration options: [Disabled] [Enabled]
VT-d
Allows you to enable virtualization technology function on memory control
hub.
Conguration options: [Disabled] [Enabled]