User's Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 System Agent (SA) Configuration
- 4.4.6 PCH-IO Configuration
- 4.4.7 PCH Storage Configuration
- 4.4.8 Onboard Devices Configuration
- 4.4.9 ACPI Settings
- 4.4.10 APM Configuration
- 4.4.11 NCT6116D Super IO Configuration
- 4.4.12 NCT6116D HW Monitor
- 4.4.13 Serial Port Console Redirection
- 4.4.14 USB Configuration
- 4.4.15 Network Stack Configuration
- 4.4.16 NVMe Configuration
- 4.4.17 SDIO Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
66
Single Board Computer
Advanced Error Reporting
This item allows you to enable or disable Advanced Error Reporting.
Conguration options: [Disabled] [Enabled]
PCIE Speed
This item allows you to congure PCIe Speed.
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
Transmitter Half-Swing
This item allows you to enable or disable Transmitter half Swing.
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
Detect Timeout
This item allows you to set the number of milliseconds reference
code will wait for link to exit Detect State for enabled ports before
assuming there is no device and potentially disabling the port.
Conguration options: [0] - [9999]
Extra Bus Reserved
This item allows you to set the number of Extra Bus Reserved (0-7)
for bridges behind this Root Bridge.
Conguration options: [0] - [7]
Reserved Memory
This item allows you to set the amount of Reserved Memory for this
Root Bridge (1-20) MB.
Conguration options: [1] - [20]
Reserved I/O
This item allows you to set the Reserved I/O (4K/8K/16K/20K) Range
for this Root Bridge.
Conguration options: [4] - [20]
PCh PCIe LTR Conguration
LTR
This item allows you to enable or disable the PCH PCIE Latency
Reporting.
Conguration options: [Disabled] [Enabled]