User's Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 System Agent (SA) Configuration
- 4.4.6 PCH-IO Configuration
- 4.4.7 PCH Storage Configuration
- 4.4.8 Onboard Devices Configuration
- 4.4.9 ACPI Settings
- 4.4.10 APM Configuration
- 4.4.11 NCT6116D Super IO Configuration
- 4.4.12 NCT6116D HW Monitor
- 4.4.13 Serial Port Console Redirection
- 4.4.14 USB Configuration
- 4.4.15 Network Stack Configuration
- 4.4.16 NVMe Configuration
- 4.4.17 SDIO Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
72
Single Board Computer
NOTE: The following item appears only when Enable ACPI Auto
Conguration is set to [Disabled].
Enable Hibernation
Allows you to enable or disable the ability of the system to hibernate (OS/S4
Sleep State).
Conguration options: [Disabled] [Enabled]
IMPORTANT! This option may be not be eective with some OS.
ACPI Sleep State
Allows you to select the highest ACPI sleep state the system will enter when
the SUSPEND button is pressed.
Conguration options: [Suspend Disabled] [S3 (Suspend to RAM)]
Lock Legacy Resources
Allows you to enable or disable the Lock of Legacy Resources.
Conguration options: [Disabled] [Enabled]
4.4.10 APM Conguration
Allows you to congure the Advance Power Management (APM) settings.
ErP Ready
Allows you to switch o some power at S4+S5 or S5 to get the system ready
for ErP requirement. When set to [Enabled], all other PME options will be
switched o.
Conguration options: [Disabled] [Enabled(S4+S5] [Enabled(S5)]