User's Manual

86 Single Board Computer
Network / Storage / Video
This option allows you to control the execution of UEFI and Legacy
PXE/ Storage/Video OpROM.
Conguration options: [Do not launch] [UEFI ] [Legacy]
Other PCI devices
This item determines the OpROM execution policy for devices other
than Network, Storage, or Video.
Conguration options: [Do not launch] [UEFI ] [Legacy]
Fast Boot
[Disabled] Allows your system to go back to its normal boot speed.
[Enabled] Allows your system to accelerate the boot speed.
NOTE: The following items appear only when Fast Boot is set to
[Enabled].
SATA Support
[Last Boot SATA Devices Only] Only last boot SATA device will be
available in POST.
[All SATA Devices] All SATA devices will be available in OS
and POST.
VGA Support
[Auto] Only install the Legacy OpRom with Legacy OS and logo will
not be shown during POST.
[EFI Driver] EFI driver will still be installed with the EFI OS.
USB Support
[Disabled] All USB devices will NOT be available until after OS boot.
[Full Initial] All USB devices will be available in OS and POST.
[Partial Initial] USB Mass Storage and specic USB port/device will NOT
be available before OS boot.