User's Manual

96 Single Board Computer
Safety information
Your Single Board Computer is designed and tested to meet the latest
standards of safety for information technology equipment. However,
to ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
• Readandfollowallinstructionsinthedocumentationbeforeyou
operate your system.
• Donotusethisproductnearwateroraheatedsource.
• Setupthesystemonastablesurface.
• Peripheralswithextendedtemperaturetolerance(suchasindustrial
grade DRAM, SSD, etc.) will allow this product to be used in
environments with ambient temperatures between -20˚C and 60˚C,
witha0.1m/sairow.Ifyouplantousea2.5”HDDwiththisproduct,
please use this product in environments with ambient temperatures
between0˚C~45˚C,witha0.1m/sairow.
• Theproductshouldbeusedinenvironmentswithanambient
temperature of 45˚C when using the 65W adapter, whilst using HDD or
SDD only and without the PoE module installed.
• Ifyouuseanextensioncord,makesurethatthetotalampererating
of the devices plugged into the extension cord does not exceed its
ampere rating.
• Thisequipmentshouldbeinstalledandoperatedwithaminimum
distance of 20cm between the radiator and your body.
• RestrictedAccessLocation:
The equipment should only be installed in a Restricted Access Area
where both these conditions apply:
- access can only be gained by USERS who have been instructed about
the reasons for the restrictions applied to the location and about any
precautions that shall be taken; and
- access is through the use of a TOOL or lock and key, or other means
of security, and is controlled by the authority responsible for the
location.
• ThisdeviceshallnotbeconnectedtoanEthernetnetworkwithoutside
plant routing.