User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 PCH-IO Configuration
- 4.4.6 PCH Storage Configuration
- 4.4.7 Onboard Devices Configuration
- 4.4.8 ACPI Settings
- 4.4.9 APM Configuration
- 4.4.10 NCT6116D Super IO Configuration
- 4.4.11 NCT6116D HW Monitor
- 4.4.12 Serial Port Console Redirection
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 NVMe Configuration
- 4.4.16 LFP Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
Single Board Computer
85
4.4.14 Network Stack Conguration
Allows you to congure the network stack conguration.
4.4.15 NVMe Conguration
This menu displays the NVMe controller and Drive information of the
connected devices.
Network Stack
Allows you to enable or disable UEFI Network Stack.
Conguration options: [Disabled] [Enabled]
NOTE: The following items appear only when Network Stack is set to
[Enabled].
Ipv4 PXE Support
Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot
option will not be created.
Conguration options: [Disabled] [Enabled]
Ipv6 PXE Support
Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot
option will not be created.
Conguration options: [Disabled] [Enabled]