User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 PCH-IO Configuration
- 4.4.6 PCH Storage Configuration
- 4.4.7 Onboard Devices Configuration
- 4.4.8 ACPI Settings
- 4.4.9 APM Configuration
- 4.4.10 NCT6116D Super IO Configuration
- 4.4.11 NCT6116D HW Monitor
- 4.4.12 Serial Port Console Redirection
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 NVMe Configuration
- 4.4.16 LFP Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
Single Board Computer
89
3. From the Create New Password box, key in a new password, then press
<Enter>.
4. Conrm the password when prompted. NOTE: To clear the
administrator password, follow the same steps as in changing an
administrator password, but press <Enter> when prompted to create/
conrm the password.
User Password
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press
<Enter>.
3. Conrm the password when prompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password,
then press <Enter>.
3. From the Create New Password box, key in a new password, then press
<Enter>.
4. Conrm the password when prompted.
To clear a user password:
1. Select the Clear User Password item and press <Enter>.
2. Select Yes from the Warning message window then press <Enter>.