User's Manual

3-10
第三章：BIOS 程序設置
第三章
DRAM Driving Control
DRAM ADDR/CMD control override [Audo]
設置值有：[Audo] [Disabled] [Enabled]
DCT0 Information:
CKE drive strength [Auto]
設置值有：[Auto] [1x] [1.25x] [1.5x] [2x]
CS/ODT drive strength [Auto]
設置值有：[Auto] [1x] [1.25x] [1.5x] [2x]
ADDR/CMD drive strength [Auto]
設置值有：[Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
設置值有：[Auto] [1x] [1.25x] [1.5x] [2x]
Data drive strength [Auto]
設置值有：[Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
設置值有：[Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
設置值有：[Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [80 ohms +/-
20%] [60 ohms +/- 20%]
address/command setup time [Auto]
設置值有：[Auto] [1/2 MEMCLK DELAY(1 1/2 MEMCLK DELAY for 2T
timing)] [1 MEMCLK DELAY(2 MEMCLK DELAY for 2T timing)]
address/command fine delay [Auto]
設置值有：[Auto] [0/64 MEMCLK DELAY] – [31/64 MEMCLK DELAY]
CS/ODT setup time [Auto]
設置值有：[Auto] [1/2 MEMCLK DELAY] [1 MEMCLK DELAY]
CS/ODT fine delay [Auto]
設置值有：[Auto] [0/64 MEMCLK DELAY] – [31/64 MEMCLK DELAY]
CKE setup time [Auto]
設置值有：[Auto] [1/2 MEMCLK DELAY] [1 MEMCLK DELAY]
CKE fine delay [Auto]
設置值有：[Auto] [0/64 MEMCLK DELAY] – [31/64 MEMCLK DELAY]
DCT1 Information:
CKE drive strength [Auto]
設置值有：[Auto] [1x] [1.25x] [1.5x] [2x]
CS/ODT drive strength [Auto]
設置值有：[Auto] [1x] [1.25x] [1.5x] [2x]