User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 PCH-IO Configuration
- 4.4.6 PCH Storage Configuration
- 4.4.7 Onboard Devices Configuration
- 4.4.8 ACPI Settings
- 4.4.9 APM Configuration
- 4.4.10 NCT6116D Super IO Configuration
- 4.4.11 NCT6116D HW Monitor
- 4.4.12 Serial Port Console Redirection
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 NVMe Configuration
- 4.4.16 LFP Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
Single Board Computer
35
20. Fan connector (on selected models)
The Fan connector allows you to connect a fan to cool the system.
Connector type
WtoB CON 4P, 1.25mm, S/T
WARNING!
• DO NOT forget to connect the fan cable to the fan connector.
Insucient air ow inside the system may damage the
motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
• Ensure the cable is fully inserted into the connector.