User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 PCH-IO Configuration
- 4.4.6 PCH Storage Configuration
- 4.4.7 Onboard Devices Configuration
- 4.4.8 ACPI Settings
- 4.4.9 APM Configuration
- 4.4.10 NCT6116D Super IO Configuration
- 4.4.11 NCT6116D HW Monitor
- 4.4.12 Serial Port Console Redirection
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 NVMe Configuration
- 4.4.16 LFP Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
Single Board Computer
83
Resolution
This allows you to set the number of rows and columns supported on
the Legacy OS.
Conguration options: [80x24] [80x25]
Redirection After POST
This setting allows you to specify if Bootloader is selected than Legacy
console redirection.
[Always Enable] Legacy Console Redirection is enabled for
Legacy OS.
[Bootloader] Legacy Console Redirection is disabled before
booting to Legacy OS.
4.4.13 USB Conguration
NOTE: The USB Devices item shows the auto-detected values. If no
USB device is detected, the item shows None.
Legacy USB Support
[Disabled] The USB devices can be used only for the BIOS setup program.
It cannot be recognized in boot devices list.
[Enabled] Enables the support for USB devices on legacy operating
systems (OS).