User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 Platform Misc Configuration
- 4.4.4 CPU Configuration
- 4.4.5 PCH-IO Configuration
- 4.4.6 PCH Storage Configuration
- 4.4.7 Onboard Devices Configuration
- 4.4.8 ACPI Settings
- 4.4.9 APM Configuration
- 4.4.10 NCT6116D Super IO Configuration
- 4.4.11 NCT6116D HW Monitor
- 4.4.12 Serial Port Console Redirection
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 NVMe Configuration
- 4.4.16 LFP Configuration
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
92
Single Board Computer
Boot Option lter
This option allows you to control the Legacy/UEFI ROMs priority.
Conguration options: [UEFI and Legacy] [Legacy only] [UEFI only]
Network / Storage / Video
This option allows you to control the execution of UEFI and Legacy
PXE/ Storage/Video OpROM.
Conguration options: [Do not launch] [UEFI ] [Legacy]
Other PCI devices
This item determines the OpROM execution policy for devices other
than Network, Storage, or Video.
Conguration options: [Do not launch] [UEFI ] [Legacy]
Fast Boot
[Disabled] Allows your system to go back to its normal boot speed.
[Enabled] Allows your system to accelerate the boot speed.
NOTE: The following items appear only when Fast Boot is set to
[Enabled].
SATA Support
[Last Boot SATA Devices Only] Only last boot SATA device will be
available in POST.
[All SATA Devices] All SATA devices will be available in OS
and POST.
VGA Support
[Auto] Only install the Legacy OpRom with Legacy OS and logo will
not be shown during POST.
[EFI Driver] EFI driver will still be installed with the EFI OS.