User's Manual

華碩 RAMPAGE IV BLACK EDITION 主板用戶手冊
3-11
第三章
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
設置值有：[Auto] [1] – [7]
DRAM REF Cycle Time [Auto]
設置值有：[Auto] [1] – [511]
DRAM Refresh Interval [Auto]
設置值有：[Auto] [1] – [32767]
DRAM WRITE Recovery Time [Auto]
設置值有：[Auto] [1] – [31]
DRAM READ to PRE Time [Auto]
設置值有：[Auto] [1] – [15]
DRAM FOUR ACT WIN Time [Auto]
設置值有：[Auto] [1] – [63]
DRAM WRITE to READ Delay [Auto]
設置值有：[Auto] [1] – [15]
DRAM CKE Minimum Pulse width [Auto]
設置值有：[Auto] [1] – [15]
DRAM Write Latency [Auto]
設置值有：[Auto] [1] – [15]
Third Timings
tRRDR [Auto]
設置值有：[Auto] [0 DRAM Clock] – [7 DRAM Clock]
tRRDD [Auto]
設置值有：[Auto] [0 DRAM Clock] – [7 DRAM Clock]
tWWDR [Auto]
設置值有：[Auto] [0 DRAM Clock] – [7 DRAM Clock]
tWWDD [Auto]
設置值有：[Auto] [0 DRAM Clock] – [7 DRAM Clock]
tRWDR [Auto]
設置值有：[Auto] [0 DRAM Clock] – [15 DRAM Clock]
tRWDD [Auto]
設置值有：[Auto] [0 DRAM Clock] – [15 DRAM Clock]
Latency Boundary [Auto]
以下的項目若啟用時，可以協助提升超頻性能。設置值有：[A ut o] [Near e r]
[Further] [Furthest]