User's Manual
2-24
Chapter 2: UEFI BIOS設定
2.7.5 Option ROM Messages [Force BIOS]
[Force BIOS] サードパーティのROMメッセージをブートシーケンス時に強制的に表示させ
ます。
[Keep Current] アドオンデバイスの設定に従い、サードパーティROMメッセージを表示させ
ます。
2.7.6 Setup Mode [EZ Mode]
[Advanced Mode] UEFI BIOS Utility起動時の初期画面として、Advanced Mode を表示し
ます。
[EZ Mode] UEFI BIOS Utility起動時の初期画面として、EZ Mode を表示します。
2.7.7 CSM (Compatibility Support Module)
CSM (Compatibility Support Module)のパラメータ設定です。この設定によってUEFIドライバー
を持たないデバイスとの互換性を向上することが可能です。
Launch CSM [Enabled]
設定オプション: [Auto] [Enabled] [Disabled]
次の4項目は、「Launch CSM」を[Enabled]に設定することで表示されます。
Boot Device Control [UEFI and L...]
設定オプション: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only]
Boot from Network Devices [Legacy OpR...]
設定オプション: [Legacy OpROM rst] [UEFI driver rst] [Ignore]
Boot from Storage Devices [Legacy OpR...]
設定オプション: [Both, Legacy OpROM rst] [Both, UEFI rst] [Legacy OpROM rst]
[UEFI driver rst] [Ignore]
Boot from PCIe Expansion Devices [Legacy OpR...]
設定オプション: [Legacy OpROM rst] [UEFI driver rst]
2.7.8 Secure Boot
OSを安全に起動するために、起動時にあらかじめデジタル署名のあるソフトウェアしか実行でき
ないようにするセキュアブートの設定を行います。
OS Type [Windows UEFI mode]
設定オプション: [Windows UEFI mode] [Other OS]
次の項目は「 OS Type」の項目を [Windows UEFI mode] に設定すると表示されます。
Key Management
Clear Secure Boot keys
設定オプション: [Yes] [No]
Load PK from File
設定オプション: [OK]
Copy PK to File
設定オプション: [OK]