user manual

ASUS K7V-T User’s Manual 21

3. HARDWARE SETUP

3. H/W SETUP

Motherboard Settings

6) Voltage Regulator Output Setting (VID1, VID2, VID3)

This jumpers allow you to manually adjust the CPU core voltage. It is recom-

mended to use CPU Default as the CPU core voltage. CPU Default means the

Vcore is generated according to the CPU VID configuration. For each jumper

setting, there are two voltage options, depending on the CPU used.

0 1

K7V-T

K7V-T CPU Core Voltage

Selection

1.9/1.95Volts

1.8/1.85Volts

1.6/1.65Volts

1.4/1.45Volts 1.3/1.35olts

CPU Default/

JumperFree

(Default)

2/2.05Volts

1.5/1.55Volts

VID2

VID3

VID1

1.7/1.75Volts

VID2

VID3

VID1

VID2

VID3

VID1

3214 3214 3214

WARNING! Premature wearing of the processor may result when overclocking.

Be sure that the DIMM you use can handle the specified SDRAM MHz or else

bootup will not be possible.

External Frequency Table

CPU PCI Frequency Selection Switches

(MHz) (MHz) 1234

100.00 33.33 [ON] [ON] [OFF] [OFF]

103.00 34.33 [ON] [ON] [ON] [ON]

105.00 35 [OFF] [OFF] [OFF] [OFF]

110.00 36.67 [OFF] [OFF] [OFF] [ON]

NOTE: For updated processor settings, visit the ASUS web site (see ASUS CON-

TACT INFORMATION).