user manual

ASUS K7V-T User’s Manual 71

4. BIOS SETUP

PCI Configuration

USB Function [Enabled]

This motherboard supports Universal Serial Bus (USB) devices. Set to [En-

abled] if you want to use USB devices. Configuration options: [Disabled]

[Enabled]

VGA BIOS Sequence [PCI/AGP]

If your computer has both PCI and AGP VGA cards, this field allows ¥ou to

select which of the cards will act as your primary graphics card. [AGP/PCI]

uses the AGP card as your primary card. The default, [PCI/AGP], allows

your PCI graphics card to take precedence when detected. Configuration

options: [PCI/AGP] [AGP/PCI]

IRQ XX Used for Legacy Device [No/ICU]

These fields indicate whether or not the displayed IRQ for each field is

being used by an onboard legacy (non-PnP) ISA device. The default value

indicates either that the displayed IRQ is not used or that ISA Configuration

Utility (ICU) is being used to determine if an ISA device is using that IRQ.

Configuration options: [No/ICU] [Yes]

PCI/PNP IRQ Resource Exclusion