Motherboard P5N-E SLI
E2968 First Edition V2 December 2006 Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Notices.................................................................................................vii Safety information..............................................................................viii About this guide................................................................................... ix How this guide is organized...................................................... ix Where to find more information...............................................
Contents 1.8.6 Two PCI Express x16 slots..................................... 1-25 1.9 Jumpers............................................................................... 1-26 1.10 Connectors.......................................................................... 1-28 1.10.1 Rear panel connectors........................................... 1-28 1.10.2 Internal connectors................................................ 1-29 Chapter 2: BIOS setup 2.1 2.2 2.3 2.
Contents 2.5 2.6 2.7 2.8 2.4.3 CPU Configuration.................................................. 2-26 2.4.4 Chipset................................................................... 2-27 2.4.5 PCIPnP.................................................................... 2-31 2.4.6 Onboard Devices Configuration.............................. 2-31 2.4.7 USB Configuration.................................................. 2-35 Power menu.............................................................
A.1 Intel® EM64T.......................................................................... A-1 A.2 Enhanced Intel SpeedStep® Technology (EIST)..................... A-1 A.2.1 A.3 vi System requirements............................................... A-1 A.2.2 Using the EIST.......................................................... A-2 Intel® Hyper-Threading Technology.......................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • ��������������������� Chapter 2: BIOS setup This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
P5N-E SLI specifications summary CPU LGA775 socket for Intel® Quad-Core/ Core™ Extreme/ Pentium D/ Pentium® 4/ Celeron® CPU processors Compatible with Intel® 06/05B/05A processors Supports Intel® Enhanced Memory 64 Technology (EM64T) Supports Enhanced Intel SpeedStep® Technology (EIST) Supports Intel® Hyper-Threading Technology Chipset North Bridge: NVIDIA nForce® 650i SLI™ (C55) South Bridge: NVIDIA nForce® 430i (MCP 51) Front Side Bus 1333**/1066/800/533 MHz (** available when CPUs are ready for 1333
P5N-E SLI specifications summary USB Supports up to 8 USB 2.0 ports Overclocking features Intelligent overclocking tool: - AI Overclocking (Intelligent CPU Frequency Tuner) ASUS CPU Lock Free Precision Tweaker supports: - vDIMM voltage: 8-step DRAM voltage control - vCore voltage: Adjustable CPU voltage at 6.
P5N-E SLI specifications summary Internal connectors 1 x Floppy disk drive connector 1 x 1394a connector 1 x CD audio in connector 1 x 24-pin ATX power connector 1 x 4-pin ATX 12 V power connector 2 x USB connectors for additional four USB 2.0 ports 1 x S/PDIF out connector 1 x COM Port connector 1 x Chassis intrusion connector 1 x Front panel connector (AAFP) 1 x CPU Fan connector 2 x Chassis fan connectors System panel connector Manageability WfM 2.0, DMI 2.
xiv
This chapter describes the motherboard features and the new technologies it supports.
1.1 Welcome! Thank you for buying an ASUS® P5N-E SLI motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items.
1.3 Special features 1.3.1 Product highlights LGA775 Intel ����� ® Quad-core Processor Ready This motherboard supports the latest powerful and energy efficient processors from Intel. Intel® Quad-core is based on the Intel Core Microarchitecture process technology that allows users to step up to new levels of gaming experience and multi-tasking performance. Combined with 1066/800 of front side bus (FSB), this motherboard guarantees enhanced user experience in the digital home and office.
DDR2 memory support The motherboard supports DDR2 memory which features data transfer rates of 800 MHz, 667 MHz or 533 MHz to meet the higher bandwidth requirements of the latest 3D graphics, multimedia, and Internet applications. The dual-channel DDR2 architecture doubles the bandwidth of your system memory to boost system performance, eliminating bottlenecks with peak bandwidths of up to 10.7 GB/s. See pages 1-17 to 1-21 for details.
1.3.2 Innovative ASUS features ASUS O.C. Profile� The motherboard features the ASUS O.C. Profile that allows users to conveniently store or load multiple BIOS settings. The BIOS settings can be stored in the CMOS or a separate file, giving users freedom to share and distribute their favorite settings. See pages 2-45 and 2-46 for details. CrashFree BIOS 2 This feature allows you to restore the original BIOS data from the support CD in case when the BIOS codes and data are corrupted.
Fanless Design Cooling fans, though a popular thermal solution, also come with noise and malfunction likelyhood. ASUS Motherboard’s fansless concept is specifically created to provide a cool environment without all the baggage. ASUS has devoted special efforts to address the thermal issues across the motherboard, and most notably the areas that reside the CPU, power, VGA, Northbridge and Southbridge. The heat sinks and strategic board layout were tailor made to dissipate heat in the most efficient manner.
1.4 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them.
1.5 Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. 1.5.1 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation.
1.5.3 Motherboard layout 22.9cm (9.0in) KBPWR PS/2KBMS T:Mouse B:Keyboard SPDIF_O1 PARALLEL PORT CR2032 3V Lithium Cell CMOS Power Marvell 88E1116 30.
1.6 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 designed for the Intel® Quad-Core, Core™2 Extreme, Core™2 Duo, Pentium® Extreme, Pentium® D, Pentium® 4 and Celeron® D processors in the 775-land package. 1.6.1 • Install a chassis fan with at least a speed of 2400 rpm and 8 CFM turnrate when using a dual-core CPU to ensure system stability. Overheating can permanently damage the system and/or CPU.
2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab A PnP cap Load lever B This side of the socket box should face you. To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 3. Lift the load lever in the direction of the arrow to a 135º angle. 4.
The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 6. A Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. B The motherboard supports Intel® Pentium® 4 LGA775 processors with the Intel® Enhanced Memory 64 Technology (EM64T), Enhanced Intel SpeedStep® Technology (EIST), and Hyper-Threading Technology.
1.6.2 Installing the CPU heatsink and fan ® Intel LGA775 processors require a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. • When you buy a boxed Intel® processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, make sure that you use only Intel®‑certified multi‑directional heatsink and fan. • Your Intel® LGA775 processor heatsink and fan assembly comes in a push-pin design and requires no tool to install.
2. 3. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. A B B A B A A B Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. R CPU FAN PWM CPU FAN IN CPU FAN PWR GND P5N-E SLI CPU_FAN P5N-E SLI CPU Fan Connector 1-14 • Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.
1.6.3 Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. 4. A B B A B A A B Carefully remove the heatsink and fan assembly from the motherboard.
5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. Narrow end of the groove The narrow end of the groove should point outward after resetting. (The photo shows the groove shaded for emphasis.) Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation.
1.7 System memory 1.7.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM socket.
Note on memory limitations The motherboard can support up to 8 GB on the operating systems listed below. You may install a maximum of 2 GB DIMMs on each slot. 32-bit ® 64-bit ® Windows 2000 Advanced Server Windows Server Standard x64 Edition Windows® Server 2003 Enterprise Edition Windows® XP Professional x64 Edition Windows® Server 2003 Enterprise x64 Edition Qualified Vendors Lists (QVL) DDR2 with 800 MHz capability 1-18 DIMM support Size Vendor Chip No Side(s) Part No.
DDR2 with 667 MHz capability Size Vendor 256MB KINGSTON 256MB 256MB DIMM support Side(s) Part No.
DDR2 with 533 MHz capability Size Vendor Chip No. Side(s) DIMM support Part No. A B C 256MB KINGSTON E5116AF-5C-E SS KVR533D2N4/256 • • • 512MB KINGSTON HYB18T512800AF37 SS KVR533D2N4/512 • • • 1024MB KINGSTON 5YDIID9GCT DS KVR533D2N4/1G • • 256MB Qimonda HYB18T512160AF-3.7 SS HYS64T32000HU-3.7-A • • • 512MB Qimonda HYB18T512800AF37 SS HYS64T64000HU-3.7-A • • • 1024MB Qimonda HYB18T512800AF37 DS HYS64T128020HU-3.
1.7.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. 2 To install a DIMM: 1. Unlock a DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. 3.
1.8 Expansion slots In the future, you may need to install expansion cards. The following sub‑sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1.8.1 Installing an expansion card To install an expansion card: 1.
1.8.
1.8.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. The figure shows a LAN card installed on a PCI slot. 1.8.5 PCI Express x1 slot This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express specifications. The figure shows a network card installed on the PCI Express x1 slot.
1.8.6 Two PCI Express x16 slots This motherboard supports one PCI Express x16 graphics card or two SLI‑ready PCI Express x16 graphic cards that comply with the PCI Express specifications. The figure shows a graphics card installed on the PCI Express x16 slot. Install a rear chassis fan to the chassis (CHA_FAN) connector when using two graphics cards for better thermal environment. See page 1-32 for details.
1.9 1. Jumpers Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system •words. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the onboard battery. 3. Move the jumper cap from pins 1-2 (default) to pins 2-3.
2. USB device wake-up (3-pin USBPW1-4, USBPW5-8) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). P5N-E SLI 1 2 2 3 USBPW1-4 +5VSB +5V (Default) R USBPW5-8 1 2 +5VSB +5V (Default) P5N-E SLI USB Device Wake Up 3.
1.10 Connectors 1.10.1 Rear panel connectors 1 3 2 4 5 6 7 12 11 10 9 8 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. 3. IEEE 1394a port. This 6-pin IEEE 1394 port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices. 4. LAN (RJ-45) port.
Audio 2, 4, or 6-channel configuration Port Light Blue Headset 2-channel Line In 4-channel 6-channel Rear Speaker Out Surround Lime Line Out Front Speaker Out Front Speaker Out Pink Mic In Mic In Center/Bass 8. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 9. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 10. External SATA port.
2. IDE connector (40-1 pin PRI_IDE, SEC_IDE) The onboard IDE connector is for the Ultra DMA 133/100/66/33 signal cable. There are four connectors on each Ultra DMA 133/100/66/33 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then select one of the following modes to configure your device.
3. Serial ATA connectors (7-pin SATA1 [red], SATA2 [black], SATA3 [red], SATA4 [black]) These connectors are for the Serial ATA signal cables for Serial ATA hard disk and optical disk drives. These connectors are Disabled by default. If you intend to create a Serial ATA RAID set using these connectors, enable the First, Second, Third or Fourth SATA Master RAID items in Advanced > Onboard Devices Configuration > NVRAID Configuration of the BIOS. See section “2.4.
5. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.
7. Azalia Analog Front Panel (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports legacy AC ‘97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP NC AGND NC NC Legacy AC’97 compliant definition MIC2 MICPWR Line out_R NC Line out_L PORT1L PORT1R PORT2R SEBSE_SEND PORT2L R SENSE2_RETUR P5N-E SLI GND PRESENSE# SENSE1_RETUR HD-audio-compliant pin definition P5N-E SLI Front Panel Audio Connector 8.
9. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap.
• For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 400 W. • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.
12. System panel connector (20-pin PANEL) This connector supports several chassis-mounted functions. PA NEL PLED IDE_LED Ground Reset Ground PWR IDE_LEDIDE_LED+ P5N-E SLI Speaker Ground Ground +5V PLED- PLED+ R SPEAKER RESET PWRSW * Requires an ATX power supply P5N-E SLI System Panel Connector The sytem panel connector is color-coded for easy connection. Refer to the connector description below for details.
Q-Connector (System panel) ASUS Q-Connector allows you to easily to connect the chassis front panel cables to the motherboard. Perform these steps to install ASUS QConnector. Step 1 Connect the front panel cables to their respective connectors on the ASUS Q-Connector. Refer to the labels on the Q-Connector for proper connection and pin definition. Step 2 Carefully connect the ASUS Q-Connector to the System panel connector.
1-38 Chapter 1: Product introduction
This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
2.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. Award BIOS Flash Utility (Updates the BIOS in DOS mode using a bootable floppy disk.) 2. ASUS CrashFree BIOS 2 (Updates the BIOS using a bootable floppy disk or the motherboard support CD when the BIOS file fails or gets corrupted.) 3. ASUS EZ Flash 2 (Updates the BIOS using a floppy disk, USB Flash, or the motherboard support CD during POST.) 4.
c. Click Start, then select Run. d. From the Open field, type D:\bootdisk\makeboot a: assuming that D: is your optical drive. e. Press , then follow screen instructions to continue. 2. Copy the original or the latest motherboard BIOS file to the bootable floppy disk. 2.1.2 Updating the BIOS The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility. Follow these instructions to update the BIOS using this utility. 1. Download the latest BIOS file from the ASUS web site.
6. Type the BIOS file name in the File Name to Program field, then press . AwardBIOS Flash Utility for ASUS V1.08 (C) Phoenix Technologies Ltd. All Rights Reserved For NF-KC804-P5NESLI-00 DATE: 03/25/2005 Flash Type - SST 49LF004A/B /3.3V File Name to Program: P5NESLI.bin Message: Do You Want To Save Bios (Y/N) 7. Press when the utility prompts you to save the current BIOS file. The following screen appears. 8.
2.1.3 Saving the current BIOS file You can use the AwardBIOS Flash Utility to save the current BIOS file. You can load the current BIOS file when the BIOS file gets corrupted during the flashing process. Make sure that the floppy disk has enough disk space to save the file. To save the current BIOS file using the AwardBIOS Flash Utility: 1. Follow steps 1 to 6 of the previous section. 2. Press when the utility prompts you to save the current BIOS file. The following screen appears.
2.1.4 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD or the floppy disk that contains the updated BIOS file. Prepare the motherboard support CD or the floppy disk containing the updated motherboard BIOS before using this utility.
Recovering the BIOS from a floppy disk To recover the BIOS from the floppy disk: 1. Remove any CD from the optical drive, then turn on the system. 2. Insert the floppy disk with the original or updated BIOS file to the floppy disk drive. 3. The utility displays the following message and automatically checks the optical drive for the original or updated BIOS file. Award BootBlock BIOS v1.0 Copyright (c) 2000, Award Software, Inc. BIOS ROM checksum error Detecting IDE ATAPI device...
2.1.5 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS‑based utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing + during the Power-On Self-Test (POST). To update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for the motherboard. 2.
2.1.6 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. The ASUS Update utility allows you to: • Save the current BIOS file • Download the latest BIOS file from the Internet • Update the BIOS from an updated BIOS file • Update the BIOS directly from the Internet, and • View the BIOS version information. This utility is available in the support CD that comes with the motherboard package.
Updating the BIOS through the Internet To update the BIOS through the Internet: 2-10 1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from the Internet option from the drop‑down menu, then click Next. 3. Select the ASUS FTP site nearest you to avoid network traffic, or click Auto Select. Click Next.
4. From the FTP site, select the BIOS version that you wish to download. Click Next. 5. Follow the screen instructions to complete the update process. The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate.
2.2 BIOS setup program This motherboard supports a programmable Low-Pin Count (LPC) chip that you can update using the provided utility described in section “2.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to “Run Setup”. This section explains how to configure your system using this utility. Even if you are not prompted to use the Setup program, you can change the configuration of your computer in the future.
2.2.1 BIOS menu screen Menu items Main Menu bar Advanced Power Configuration fields Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Language Legacy Diskette A: 23 : 8 : 36 Thu, Jan 19 2006 [English] [1.44M, 3.5 in.
2.2.3 Legend bar At the bottom of the Setup screen is a legend bar. The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding functions.
2.2.7 Pop-up window Select a menu item then press to display a pop-up window with the configuration options for that item. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Language Legacy Diskette A: 23 : 8 : 36 Thu, Jan 19 2006 [English] [1.44M, 3.5 in.] Legacy Diskette A: Primary IDE Maste`r [ST32112A] Primary IDE Slave Disabled [ASUS CDS520/A] ..... [ ] Secondary IDE Master [None] 720K , 3.5 in. ..... [ ] Secondary IDE Slave [None] 1.
2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section “2.2.1 BIOS menu screen” for information on the menu screen items and how to navigate through them. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Language Legacy Diskette A: 23 : 8 : 36 Thu, Jan 19 2006 [English] [1.44M, 3.5 in.
2.3.4 Primary and Secondary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press to display the IDE device information.
Access Mode [Auto] The default [Auto] allows automatic detection of an IDE hard disk drive. Select [CHS] for this item if you set the IDE Primary Master/Slave to [Manual]. Configuration options: [CHS] [LBA] [Large] [Auto] Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. Capacity Displays the auto-detected hard disk capacity.
2.3.5 SATA1, SATA2, SATA3, SATA4 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information.
Landing Zone Shows the number of landing zone per track. This item is not configurable. Sector Shows the number of sectors per track. This item is not configurable. After entering the IDE hard disk drive information into BIOS, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to active. 2.3.
2.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction.
Overclock Options [Disabled] Allows you to disable or set the overclocking options. Configuration options: [Disabled] [Overclock 5%] [Overclock 10%] [Overclock 15%] [Overclock 20%] The Overclock Options item is user-configurable only when the AI Tuning is set to [AI Overclock]. System Clocks This sub-menu allows you to set PCI Express related field. Set the AI Tuning to [Manual], if you want to configure this item.
Voltage Control This sub-menu allows you to set the system operating voltages. Set the AI Tuning to [Manual], if you want to configure this item. Advanced Phoenix-Award BIOS CMOS Setup Utility Voltage Control VCore Voltage Memory Voltage NB Core Voltage VCore offset Voltage F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu Select Menu [Auto] [Auto] [Auto] [Auto] -/+: Change Value Enter: Select Sub-menu Item Specific Help Press [Enter] to set.
Memory Voltage [Auto] Allows you to set the memory operating voltage. Set to Auto for safe mode. Configuration options: [Auto] [1.920V] [2.013V] [2.085V] [2.178V] [2.259V] [2.353V] [2.424V] [2.517V] Refer to the DDR2 documentation before setting the memory voltage. Setting a very high memory voltage may damage the memory module(s)! NB Core Voltage [Auto] Allows you to set the NB core voltage. Configuration options: [Auto] [1.208V] [1.393V] [1.563V] [1.
FSB - Memory Ratio [Auto] Allows you to set the FSB - Memory Ratio. Configuration options: [Auto] [1:1] [5:4] [3:2] [Sync Mode] FSB (QDR), MHz [800] Allows you to set the FSB (QDR), MHz. Configuration options: [Min= 533] [Max= 3000] MEM (DDR), MHz [Unlinked] Allows you to set the MEM (DDR), MHz. Configuration options: [Unlinked] [Linked] 2.4.2 AI NET2 The items in this menu displays the status of the Local Area Network (LAN) cable.
2.4.3 CPU Configuration Advanced Phoenix-Award BIOS CMOS Setup Utility Select Menu CPU Configuration CPU Type Genuine Intel(R) CPU CPU Speed 2.80GHz Cache RAM 2048K CPU Multiplier [ 14 CPU Core Unlock [Disabled] CPU Internal Thermal Control [Auto] Limit CPUID MaxVal [Disabled] Enhanced C1 (C1E) [Disabled] Execute Disable Bit [Enabled] Enhanced Intel SpeedStep(tm)Tech.
Enhanced Intel SpeedStep(tm) Tech. [Disabled] Allows you to use the Enhanced Intel SpeedStep® Technology. When set to [Auto], you can adjust the system power settings in the operation system to use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST. Configuration options: [Disabled] [Enabled] Hyper-Threading Technology [Enabled] Enables or disables the Intel® Hyper-Threading Technology feature. This item appears only when you install a Hyper-Treading CPU.
Memory Timing Setting Advanced Phoenix-Award BIOS CMOS Setup Utility Memory Timing Setting Select Menu tCL (CAS Latency) tRCD tRP tRAS Command Per Clock (CMD) [Auto] [Auto] [Auto] [Auto] [Auto] ** Advanced Memory Settings ** tRRD tRC tWR tWTR tREF tRD tRFC Async Latency [Auto] [Auto] [Auto] [Auto] [Auto] [7] [114] [Auto] F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu Item Specific Help Select [Expert] to enter timings manually -/+: Change Value Enter: Select Sub-menu F5: Setup Defaults F10:
tRC [Auto] Sets the row cycle timing. Configuration options: [Auto] [1] [2] ~ [31] tWR [Auto] Sets the WR delay timing. Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7] tWTR [Auto] Sets the WTR delay timing. Configuration options: [Auto] [1] [2] ~ [15] tREF [Auto] Sets the REF delay timing. Configuration options: [Auto] [1] [2] tRD [7] Sets the RD delay timing. Configuration options: [Auto] [1] [2] ~ [15] tRFC [114] Sets the RFC delay timing.
CPU Spread Spectrum [Disabled] Enables or disables CPU Spread Spectrum. Configuration options: [Disabled] [Auto] PCIE Spread Spectrum [Down Spread] Enables or disables PCIE Spread Spectrum. Configuration options: [Disabled] [Down Spread] SATA Spread Spectrum [Disabled] Enables or disables SATA Spread Spectrum. Configuration options: [Disabled] [Auto] LDT Spread Spectrum [Disabled] Enables or disables LDT Spread Spectrum.
2.4.5 PCIPnP Advanced Phoenix-Award BIOS CMOS Setup Utility PCIPnP Select Menu Plug & Play O/S Primary Display Adapter ↑↓ : Select Item →←: Select Menu F1:Help ESC: Exit [No [PCI] Item Specific Help -/+: Change Value Enter: Select Sub-menu F5: Setup Defaults F10: Save and Exit Plug & Play O/S [No] Selects the plug and play O/S to operate system. Configuration options: [No] [Yes] Primary Display Adapter [PCI] Allows you to set which graphics controller to use as primary boot device.
IDE Function Setup This sub-menu contains IDE function-related items. Select an item then press to edit.
SATA2 DMA transfer [Enabled] Allows you to enable or disable the SATA2 DMA transfer access. Configuration options: [Enabled] [Disabled] IDE Prefetch Mode [Enabled] Allows you to enable or disable the IDE prefetch mode. Configuration options: [Disabled] [Enabled] NVRAID Configuration This sub-menu contains NVRAID function-related items. Select an item then press to edit.
Onboard nVidia LAN [Enabled] Enables or disables the onboard NVIDIA® Gigabit LAN controller. Configuration options: [Disabled] [Enabled] OnBoard LAN Boot ROM [Disabled] Allows you to enable or disable the onboard NVIDIA® LAN boot ROM. Configuration options: [Enabled] [Disabled] Onboard 1394 [Enabled] Enables or disables the onboard 1394 device support. Configuration options: [Disabled] [Enabled] JMicron SATA controller [Enabled] Enables or disables the JMiron SATA controller.
2.4.7 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. Advanced Phoenix-Award BIOS CMOS Setup Utility USB Configuration USB Controller USB Legacy support USB 2.
2.5 Power menu The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press to display the configuration options. Main x Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit ACPI Suspend Type ACPI APIC support APM Configuration Hardware Monitor F1:Help ESC: Exit 2.5.
2.5.
Power On By RTC Alarm [Disabled] Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items Date of Month Alarm and Time (hh:mm:ss) Alarm items become user-configurable with set values. Configuration options: [Disabled] [Enabled] Date (of Month) Alarm [Disabled] To set the date of alarm, highlight this item and press to display the Day of Month Alarm pop-up menu. Key-in a value within the specified range then press .
2.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press to display the configuration options. Power Phoenix-Award BIOS CMOS Setup Utility Hardware Monitor Select Menu CPU Q-Fan Control Chassis Q-Fan Control Vcore Voltage 3.3V Voltage 5V Voltage 12V Voltage [Disabled] [Disabled] [1.32V] [3.28V] [4.94V] [11.
2.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press to display the sub-menu. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit Select Menu Boot Device Priority Removable Drives Boot Settings Configuration Security ↑↓ : Select Item →←: Select Menu F1:Help ESC: Exit 2.6.
2.6.2 Removable Drives Phoenix-Award BIOS CMOS Setup Utility Boot Removable Drives Select Menu 1. Floppy Disks Item Specific Help Use <↑> or <↓> to select a device, then press <+> to move it up, or <-> to move it down the list. Press to exit this menu. ↑↓ : Select Item →←: Select Menu F1:Help ESC: Exit -/+: Change Value Enter: Select Sub-menu F5: Setup Defaults F10: Save and Exit 1. Floppy Disks Allows you to assign a removable drive attached to the system. 2.6.
Boot Up Floppy Seek [Disabled] Enable this item to allow the BIOS to check a floppy drive during POST. Configuration options: [Disabled] [Enabled] Bootup Num-Lock [On] Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On] Typematic Rate Setting [Disabled] Allows you to set the keystroke rate. Enable this item to configure the Typematic Rate (Chars/Sec) and the Typematic Delay (Msec).
2.6.4 Security Phoenix-Award BIOS CMOS Setup Utility Boot Boot Settings Configuration Supervisor Password User Password Password Check F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu Select Menu Clear Clear [Setup] -/+: Change Value Enter: Select Sub-menu Item Specific Help Supervisor password controls full access, to change password. F5: Setup Defaults F10: Save and Exit Supervisor Password User Password These fields allow you to set passwords: To set a password: 1.
A note about passwords The Supervisor password is required to enter the BIOS Setup program preventing unauthorized access. The User password is required to boot the system preventing unauthorized use. Forgot your password? If you forget your password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. The RAM data containing the password information is powered by the onboard button cell battery. If you need to erase the CMOS RAM, refer to section “1.9 Jumpers” for instructions.
2.7.1 ASUS O.C. Profile This item allows you to store or load multiple BIOS settings. Phoenix-Award BIOS CMOS Setup Utility Tools ASUS O.C. Profile Select Menu Item Specific Help Load BIOS Profile Save BIOS Profile Press [Enter] to select. Load BIOS Profile Phoenix-Award BIOS CMOS Setup Utility Tools Load BIOS Profile Load from Profile 1 Load from Profile 2 Load from File Select Menu Item Specific Help Load BIOS Profile from Profile 1.
Save BIOS Profile Phoenix-Award BIOS CMOS Setup Utility Tools Save BIOS Profile Select Menu Item Specific Help Save to Profile 1 Save to Profile 2 Save to File Save current BIOS Profile to Profile 1. Save to Profile 1/2 Allows you to save the current BIOS file to the BIOS Flash. Press to save the file. Save to File Allows you to save the current BIOS file to the hard disk, a floppy, or USB flash disk with a FAT32/16/12 format. To save the BIOS file: 1.
2.7.2 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. Press to start EZ Flash 2 then from the confirmation screen, use the left or right arrows to select [Yes] or [No] then press . The following screen appears if you select [Yes]. Follow screen instructions to flash the BIOS. ASUSTek EZ Flash 2 BIOS ROM Utility V3.
2.8 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Exit Exit & Save Changes Exit & Discard Changes Load Setup Default Discard Changes F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu Select Menu Item Specific Help This option save data to CMOS and exiting the setup menu.
Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select Yes to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. Discard Changes This option allows you to discard the selections you made and restore the previously saved values. After selecting this option, a confirmation appears.
2-50 Chapter 2: BIOS setup
This chapter describes the contents of the support CD that comes with the motherboard package.
3.1 Installing an operating system This motherboard supports Windows® 2000/2003 Server/XP/64-bit XP operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. 3.2 • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information.
3.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll-Drivers Installation Wizard Installs all of the drivers through ASUS InstAll-Installation wizard. nVidia Chipset Driver Program Installs the NVIDIA® Chipset drivers for the NVIDIA® nForce™ 650i SLI chipset. Realtek Audio Driver Installs the Realtek audio controller and application.
3.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll-Installation Wizard for Utilities Install all of the utilities through the Installation Wizard. ADOBE Acrobat Reader V7.0 Installs the Adobe® Acrobat® Reader V7.0 that allows you to open, view, and print documents in Portable Document Format (PDF). ASUS Update Allows you to download the latest version of the BIOS from the ASUS website.
Microsoft DirectX 9.0c Installs the Microsoft® DirectX 9.0c driver. The Microsoft DirectX® 9.0c is a multimedia technology that enhances computer graphics and sound. DirectX® improves the multimedia features of your computer so you can enjoy watching TV and movies, capturing videos, or playing games in your computer. Visit the Microsoft website (www.microsoft.com) for updates. Anti-virus Utility The anti-virus application scans, identifies, and removes computer viruses.
JMicron JMB36X 32bit RAID Driver Creates the JMicron JMB36X 32bit RAID Driver. JMicron JMB36X 64bit RAID Driver Creates the JMicron JMB36X 64bit RAID Driver. 3.2.5 Manuals menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. • Most user manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening a user manual file.
JMicron JMB36X RAID AP User’s Manual Allows you to open the JMicron JMB36X RAID AP User’s Manual. JMicron JMB36X RAID BIOS User’s Manual Allows you to open the JMicron JMB36X RAID BIOS User’s Manual. 3.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide.
3.3 NVIDIA® SLI™ technology The motherboard supports the NVIDIA® SLI™ (Scalable Link Interface) technology that allows you to install two identical PCI Express™ x16 graphics cards. Follow the installation procedures in this section. 3.3.1 • Requirements You should have two identical SLI-ready graphics cards that are NVIDIA® certified. • Visit the ASUS website (www.asus.com) for a list of qualified SLI‑ready graphics cards for this motherboard.
3.3.2 Dual graphics card setup Setting the ASUS EZ selector card Your motherboard package comes with a preinstalled ASUS EZ selector card. By default, the card is set for a single graphics card. To use two graphics cards on this motherboard, you must first set the selector card to Dual Video Cards. ASUS EZ selector card To set the selector card: 1. Locate the selector card on the motherboard. Pre-installed ASUS EZ selector card 2. Simultaneously push the retention clips outward to release the card.
3. When released, pull the selector card out of the slot. 4. Invert the selector card and insert the edge labeled Dual Video Cards. 5. Push down the selector card until the retention clips snap into place. Make sure to completely insert the selector card into the slot.
Installing SLI-ready graphics cards Install only identical SLI-ready graphics cards that are NVIDIA® certified. Different types of graphics cards will not work together properly. To install the graphics cards: 1. Prepare two graphics cards. Each graphics card should have goldfingers for the SLI connector. Goldfingers 2. Remove the metal bracket covers opposite the two PCI Express x16 slots.
3. Insert one graphics card into the blue slot labeled PCIEX16_1. Make sure that the card is properly seated on the slot. 4. Insert the second graphics card into the black slot labeled PCIEX16_2. Make sure that the card is properly seated on the slot. If required, connect an auxiliary power source to the PCI Express graphics cards.
5. Align and insert the SLI flexible cable connector to the goldfingers on each graphics card. Make sure that the connector is firmly in place. SLI connector 6. Connect a VGA cable or a DVI-I cable to the graphics card installed on the blue PCI Express slot. Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Make sure that your PCI Express graphics card driver supports the NVIDIA SLI technology.
Enabling the multi-GPU feature in Windows After installing your graphics cards and the device drivers, enable the Multi‑Graphics Processing Unit (GPU) feature in the NVIDIA nView properties. To enable the multi-GPU feature: 1. Click the NVIDIA Settings icon on your Windows taskbar. NVIDIA Settings icon 2. From the pop-up menu, select nView Desktop Manager then click nView Properties. 3. From the nView Desktop Manager window, select the Desktop Management tab. 4.
5. From the Display Properties dialog box, select the Settings tab then click Advanced. 6. Select the NVIDIA GeForce tab. 7. Click the slider to display the following screen, then select the SLI multi‑GPU item.
8. Click the Enable SLI multi-GPU check box. 9. Click OK when done. 3.4 Creating a RAID driver disk A floppy disk with the RAID driver is required when installing Windows® 2000/XP operating system on a hard disk drive that is included in a RAID set. To create a RAID driver disk: 1. Place the motherboard support CD into the CD-ROM drive. 2. Select Make Disk tab. 3.
The Appendix describes the CPU features that the motherboard supports.
A.1 Intel® EM64T • The motherboard is fully compatible with Intel® Pentium® 4 LGA775 processors running on 32-bit operating systems. • The motherboard comes with a BIOS file that supports EM64T. You can download the latest BIOS file from the ASUS website (www.asus. com/support/download/) if you need to update the BIOS file. See Chapter 2 for details. • Visit www.intel.com for more information on the EM64T feature. • Visit www.microsoft.com for more information on Windows® 64-bit OS.
A.2.2 Using the EIST To use the EIST feature: 1. Turn on the computer, then enter the BIOS Setup. 2. Go to the Advanced Menu, highlight CPU Configuration, then press . 3. Set the Intel(R) SpeedStep Technology item to [Automatic], then press . See page 2-27 for details. 4. Press to save your changes and exit the BIOS setup. 5. After the computer restarts, right click on a blank space on the desktop, then select Properties from the pop-up menu. 6.
A.3 Intel® Hyper-Threading Technology • The motherboard supports Intel® Pentium® 4 LGA775 processors with Hyper-Threading Technology. • Hyper-Threading Technology is supported under Windows® XP/2003 Server and Linux 2.4.x (kernel) and later versions only. Under Linux, use the Hyper-Threading compiler to compile the code. If you are using any other operating systems, disable the Hyper-Threading Techonology item in the BIOS to ensure system stability and performance.
