使用手冊 Motherboard CROSSBLADE RANGER
T9512 第一版 2014 年 7 月發行 版權說明 ©ASUSTeK Computer Inc. All rights reserved.
目錄內容 安全性須知........................................................................................................................................ vi 電氣方面的安全性.............................................................................................................. vi 操作方面的安全性.............................................................................................................. vi REACH 資訊..............................................................................................................
目錄內容 2.2 2.3 2.4 2.5 2.1.7 安裝前面板 I/O 連接埠................................................................................. 2-9 2.1.8 安裝擴充卡.......................................................................................................2-10 BIOS 更新應用程式.......................................................................................................2-11 2.2.1 USB BIOS Flashback.....................................................................................2-11 主機板後側面板與音效連接埠...........
目錄內容 第四章:軟體支援 4.1 安裝作業系統..................................................................................................................... 4-1 4.2 驅動及公用程式 DVD 光碟資訊................................................................................. 4-1 4.2.1 執行驅動及公用程式 DVD 光碟................................................................ 4-1 4.2.2 取得軟體使用手冊.......................................................................................... 4-2 4.3 軟體資訊...............................................
安全性須知 電氣方面的安全性 • 為避免可能的電擊造成嚴重損害,在搬動電腦主機之前,請先將電腦電源線暫時 從電源插槽中拔掉。 • 當您要加入硬體裝置到系統中時,請務必先連接該裝置的訊號線,然後再連接電 源線。可能的話,在安裝硬體裝置之前先拔掉電腦的電源供應器電源線。 • 當您要從主機板連接或拔除任何的訊號線之前,請確定所有的電源線已事先拔 掉。 • 在使用介面卡或擴充卡之前,我們建議您可以先尋求專業人士的協助。這些裝置 有可能會干擾接地的迴路。 • 請確定電源供應器的電壓設定已調整到本國/本區域所使用的電壓標準值。若您不 確定您所屬區域的供應電壓值為何,請就近詢問當地的電力公司人員。 • 如果電源供應器已損毀,請不要嘗試自行修復。請將之交給專業技術服務人員或 經銷商來處理。 操作方面的安全性 • 在您安裝主機板以及加入硬體裝置之前,請務必詳加閱讀本手冊所提供的相關資 訊。 • 在使用產品之前,請確定所有的排線、電源線都已正確地連接好。若您發現有任 何重大的瑕疵,請儘速聯絡您的經銷商。 • 為避免發生電氣短路情形,請務必將所有沒用到的螺絲、迴紋針及其他零件收 好,不要遺留在主機板上或電腦主機
REACH 資訊 注意:謹遵守 REACH(Registration, Evaluation, Authorisation, and Restriction of Chemicals) 管理規範,我們會將產品中的化學物質公告在華碩 REACH 網站,詳細請 參考 http://csr.asus.com/english/REACH.htm。 請勿將本主機板當作一般垃圾丟棄。本產品零組件設計為可回收利用。 這個打叉的垃圾桶標誌表示本產品(電器與電子設備)不應視為一般垃 圾丟棄,請依照您所在地區有關廢棄電子產品的處理方式處理。 請勿將內含汞的電池當作一般垃圾丟棄。這個打叉的垃圾桶標誌表示電 池不應視為一般垃圾丟棄。 產品回收與處理 華碩與資源回收業者以最高標準相互配合,以保護我們的環境,確保工作者的安 全,以及遵從全球有關環境保護的法律規定。我們保證以資源回收的方式回收以往生 產的舊設備,透過多樣的方式保護環境。 如欲了解更多關於華碩產品資源回收資訊與聯絡方式,請連線上網至 CSR(Corporate Social Responsibility)網頁:http://csr.asus.
關於這本使用手冊 產品使用手冊包含了所有當您在安裝華碩 CROSSBLADE RANGER 主機板時所需用 到的資訊。 使用手冊的編排方式 使用手冊是由下面幾個章節所組成: • 第一章:產品介紹 您可以在本章節中發現諸多華碩所賦予本主機板的優異特色。利用簡潔易懂的 說明讓您能很快地掌握本主機板的各項特性,當然,在本章節中我們也會提及所 有能夠應用在本主機板的新產品技術。 • 第二章:硬體裝置資訊 本章節描述所有您在安裝系統元件時必須完成的硬體安裝程序。詳細內容有: 處理器與記憶體安裝、跳線選擇區設定以及主機板的各種裝置接頭。 • 第三章:BIOS 程式設定 本章節描述如何使用 BIOS 設定程式中的每一個選單項目來更改系統的組態設 定。此外也會詳加介紹 BIOS 各項設定值的使用時機與參數設定。 • 第四章:軟體支援 您可以在本章節中找到所有包含在華碩驅動程式及公用程式光碟中的軟體相關 資訊。 • 第五章:RAID 支援 本章節介紹 RAID 的各項設定。 viii
提示符號 為了能夠確保您正確地完成主機板設定,請務必注意下面這些會在本手冊中出現的 標示符號所代表的特殊含意。 警告:提醒您在進行某一項工作時要注意您本身的安全。 小心:提醒您在進行某一項工作時要注意勿傷害到電腦主機板元件。 要:此符號表示您必須要遵照手冊所描述之方式完成一項或多項軟硬體 重 的安裝或設定。 注意:提供有助於完成某項工作的訣竅和其他額外的資訊。 跳線帽及圖示說明 主機板上有一些小小的塑料套,裡面有金屬導線,可以套住選擇區的任二隻針腳 (Pin)使其相連而成一通路(短路),本手冊稱之為跳線帽。 有關主機板的跳線帽使用設定,茲利用以下圖示說明。以下圖為例,欲設定為 「Jumper™ Mode」,需在選擇區的第一及第二隻針腳部份蓋上跳線帽,本手冊圖示 即以塗上底色代表蓋上跳線帽的位置,而空白的部份則代表空接針。以文字表示為: [1-2]。 因此,欲設定為「JumperFree™ Mode」,以右圖表 示即為在「第二及第三隻針腳部份蓋上跳線帽」,以 文字表示即為:[2-3]。 1 2 Jumper Mode 2 3 Jumper Free (Default) 哪裡可以找到更多的產品資訊
代理商查詢 華碩主機板在台灣透過聯強國際與精技電腦兩家代理商出貨,您請參考下列範例 圖示找出產品的 12 碼式序號標籤(下圖僅供參考),再至 http://tw.asus.com/support/ eService/querydist_tw.
CROSSBLADE RANGER 規格列表 加速處理器 支援 FM2+ 規格插槽 AMD® A 系列 / Athlon™ 系列處理器 支援多達 4 個 CPU 核心 支援 AMD® Turbo Core 技術 3.0 • 請參考 http://tw.asus.com 獲得最新的 AMD ® 加速處理器 (APU)支援列表。 晶片組 AMD® A88X FCH(Bolton-D4)晶片組 支援雙通道記憶體架構 4 x 240-pin 記憶體插槽,使用符合 non-ECC unbuffered DDR3 2666(超頻)/2400(超頻)/2250(超頻)/2200(超 頻)/2133 /1866/1600/1333MHz 記憶體模組,最高可以擴 充至 64GB 記憶體 支援 AMD Memory Profile(AMP)記憶體 * 16GB 或更高容量的記憶體模組可支援 64GB 總記憶體。記 憶體模組一經上市,華碩將立即更新記憶體合格供應商列 表(QVL)。 ** 是否支援高速記憶體模組按照處理器的實體特性而定。 *** 請造訪 http://tw.asus.
CROSSBLADE RANGER 規格列表 音效 ROG SupremeFX 8 聲道高傳真音效編解碼器 - SupremeFX Shielding™ 技術 - ELNA 優質音效電容 - 全速無損 DVD 音效內容保護、藍光 DVD 與 HD-DVD 音效內容播放 - 支援音效連接埠檢測(Jack-detection)、多音源獨立 輸出(Multi-streaming)與前面板音效接頭變換(JackRetasking)功能 - 後側面板光纖 S/PDIF 數位音效輸出連接埠 音效功能: USB ROG 獨家功能 - Sonic Radar II - Sonic Studio - Sonic SoundStage - Sonic SenseAmp - DTS Connect ASMedia USB 3.0 控制器 - 2 x USB 3.0/2.0 連接埠(藍色,位於後側面板) AMD® A88X FCH - 4 x USB 3.0/2.
CROSSBLADE RANGER 規格列表 華碩獨家功能 華碩第五代雙智慧處理器 - 支援五路最佳化(5-Way Optimization)可一鍵調節華碩獨 家 DIGI+數位供電控制、TPU、EPU 與 Fan Xpert3 及 Turbo APP。 華碩獨家功能: - 華碩 AI Suite 3 - 華碩 MemOK! - 華碩 USB 3.
CROSSBLADE RANGER 規格列表 內建 I/O 裝置連接埠 1 x USB 3.0/2.0 擴充套件排線插槽,可擴充 2 組 USB 3.0/2.0 連接埠 3 x USB 2.0/1.1 擴充套件排線插槽,可擴充 6 組 USB 2.0/1.
包裝內容物 在您拿到本主機板包裝盒之後,請馬上檢查下面所列出的各項標準配件是否齊全。 主機板 ROG CROSSBLADE RANGER 排線 2 x 2 合 1 SATA 6Gb/s 排線 1 x I/O 擋板 1 x 12 合 1 ROG 線標 1 x 2 合 1 Q-Connector 套件 配件 1 x ROG 拉門吊掛 1 x ROG 滑鼠墊 公用程式光碟 ROG 主機板驅動程式與公用程式 DVD 光碟 相關文件 使用手冊 若以上列出的任何一項配件有損毀或是短缺的情形,請儘速與您的經銷 商聯絡。 xv
建立 PC 系統所需的其他工具與元件 一袋螺絲 Philips(十字)螺絲起子 PC 機殼 電源供應裝置 AMD FM2+ 中央處理器 相容 AMD FM2+ 處理器風扇 DDR3 記憶體模組 SATA 硬碟 SATA 光碟機(選配) 顯示卡(選配) 上表所列的工具與元件并不包含在主機板包裝盒內。 xvi
1.1 特殊功能 1.1.
1.1.
1.1.3 玩家共和國(ROG)獨家功能 Extreme Engine Digi+ III 第一章 Extreme Engine Digi+ III 提供硬派的功率傳輸,以符合具有挑戰性與極致遊戲的享 受。採用極佳的原件,如 NexFET Power Block MOSFET,新型的合金電抗器與 10K 黑金電容,可以提供強大的耐用性與在正常使用下提供高達 90% 效率。10K 黑金電 容較一般電容長達五倍使用壽命,比一般電容更常更寬 20%,且具有更好的低溫耐用 性,達到完美的主機板超頻效能。 RAMDisk RAMDisk 可以使用部分系統記憶體將它變成一個高速的實體儲存,提供您在此儲 存緩存檔案與遊戲程式而能達到立即讀取。此外,延長 SSD 的生命週期,並保持您 的主要儲存最佳化,則是相當重要的任務,並且可以獲得自動備份與回復檔案。 RAMDisk 只支援 64 位作業系統。 1.1.
1.1.
1.2 主機板概述 1.2.
1.2.
主機板元件說明 連接插槽/開關與跳線選擇區/插槽 1. ATX 主機板電源插槽(24-pin EATXPWR、8-pin EATX12V) 2. 中央處理器、機殼與選購風扇電源插槽(4-pin CPU_FAN;4-pin CPU_OPT;4-pin CHA_FAN1-3) 3. AMD FM2+ 處理器插槽 頁數 1-40 4. DDR3 記憶體模組插槽 1-9 5. Q_CODE 指示燈 1-29 6. 啟動開關(START) 1-23 7. 重置開關(RESET) 1-23 8. Slow 模式開關 1-26 9. MemOK! 按鈕 1-24 1-8 10. LN2 模式跳線(3-pin LN2_MODE) 11. Q 指示燈(BOOT_DEVICE_LED、VGA_LED、DRAM_LED、CPU_ LED) 12 USB 3.0 擴充套件排線插槽(20-1 pin USB3_34) 1-27 13. AMD A88X SATA 6.0 Gb/s 裝置連接插座(7-pin SATA6G_1~8 [紅色]) 1-35 14.
1.2.
1.2.
記憶體設定 您可以任意選擇使用 1GB、2GB、4GB 與 8GB 的 unbuffered non-ECC DDR3 記憶 體模組至本主機板的記憶體插槽上。 第一章 • 您可以在通道 A 與通道 B 安裝不同容量的記憶體模組,在雙通道設定 中,系統會檢測較低容量通道的記憶體容量。任何在較高容量通道的其 他記憶體容量,會被檢測為單通道模式執行。 • 在本主機板請使用相同 CL(CAS-Latency 行位址控制器延遲時間)記 憶體模組。為求最佳相容性,建議您使用同一廠商所生產的相同容量 型號之記憶體。 • 由於 32-bit Windows 作業系統記憶體位址空間的限制,當您安裝 4GB 或更多的記憶體模組時,系統實際可用的總記憶體只有 3GB 或更少。 為充分利用記憶體,您可以執行以下任一動作: - 若 您使用 32-bit Windows 作業系統,建議系統記憶體最高安裝 3GB 即可。 - 當 您的主機板安裝 4G B 或更多的記憶體時,建議您安裝 64-b i t Windows 作業系統。 若需要更詳細的資料,請造訪 Microsoft 網站 http://support.
CROSSBLADE RANGER 主機板記憶體合格供應商列表(QVL) DDR3 2666 (O.C.) MHz 型號 SS/DS 晶片 廠牌 容量 CORSAIR CMD16GX3M4A2666C10 (Ver4.13) 4GB G.SKILL F3-2666C11Q-16GTXD(XMP) 晶片 時序 型號 支援記憶體插槽(選配) 電壓 DS - - 10-12-12-31 1.65V 16GB (4x4GB) DS - - 11-13-13-35 1.65V 1 DIMM . . 2 DIMM 4 DIMM 第一章 供應商 . DDR3 2400 (O.C.) MHz 供應商 型號 容量 SS/DS 晶片 廠牌 晶片型號 時序 電壓 支援記憶體插槽(選配) 1 DIMM 2 DIMM KINGMAX FLLE88F-C8KKAA HAIS (XMP) 2GB SS - - 10-11-10-30 1.8V . . . G.
DDR3 2133MHz 第一章 1-12 支援記憶體插槽(選配) 供應商 型號 容量 SS/DS 晶片 廠牌 晶片型號 時序 電壓 A-DATA AX3U2133GC2G9B-DG2 (XMP) 2GB SS - - 9-11-9-27 1.55~ 1.75V . . CORSAIR CMT16GX3M4X2133C9 (XMP1.3) 16GB (4GBx4 ) DS - - 9-11-10-27 1.50V . . CORSAIR CMT4GX3M2A2133C9 (XMP) 4GB (2x2GB) DS - - 9-10-9-24 1.65V . . CORSAIR CMT4GX3M2B2133C9 (XMP) 4GB (2x2GB) DS - - 9-10-9-27 1.50V . . CORSAIR CMT8GX3M2B2133C9 (XMP) 8GB (4GBx2) DS - - 9-11-9-27 1.50V . G.
DDR3 1866MHz CORSAIR 容量 SS/ 晶片 DS 廠牌 晶片 時序 型號 電壓 CMT4GX3M2A1866C9 (XMP) 4GB (2x2GB) DS - - 9-9-9-24 1.65V . . DS - - 9-9-9-24 1.65V . . DS - - 9-10-9-27 1.50V . . . DS - - 9-10-9-28 1.5V . . . DS - - 10-11-10-30 1.5V . . . DS - - 9-10-9-28 1.5V . . . DS - - 9-9-9-24 1.6V . . . DS - - - 1.65V . . . DS - - - 1.65V . . . DS - - - 1.5V . . . DS - - - 1.65V . . . 4GB DS - - 9-9-9-27 1.5V . 4GB DS - - 9-9-9-27 1.5V . .
DDR3 1600MHz 第一章 供應商 型號 容量 SS/ DS 晶片 廠牌 A-DATA AM2U16BC2P1 2GB SS A-DATA AX3U1600XB2G79-2X (XMP) 4GB (2x2GB) A-DATA AM2U16BC4P2 4GB AX3U1600GC4G9-2G (XMP) AX3U1600XC4G79-2X (XMP) TR3X3G1600C8D (XMP) CMD12GX3M6A1600C8 (XMP) CMZ32GX3M4X1600C10 (XMP) CMP4GX3M2A1600C8 (XMP) CMP4GX3M2A1600C9 (XMP) CMP4GX3M2C1600C7 (XMP) CMX4GX3M2A1600C9 (XMP) CMX4GX3M2A1600C9 (XMP) TR3X6G1600C8 G (XMP) TR3X6G1600C8D G (XMP) TR3X6G1600C9 G (XMP) CMP8GX3M2A1600C9 (XMP) CMZ8GX3M2A1600C7R (XMP) CMX8GX3M4A1600C9 (XMP
DDR3 1600MHz KINGMAX KINGMAX KINGSTON KINGSTON KINGSTON 型號 FLGE85F-B8KJ9A FEIS(XMP) FLGE85F-B8MF7 MEEH(XMP) 支援記憶體插槽(選配) 容量 SS/DS 晶片 廠牌 晶片型號 時序 電壓 2GB DS - - - - . . . 2GB DS - - 7 - . . . SS - - - 1.5V . . . DS - - 9-9-9-27 1.65V . . DS - - 9-9-9-27 1.65V . . . . . . . . 4GB (2x2GB) KHX1600C9D3K3/12GX 12GB (XMP) (3x4GB) KHX1600C9D3T1BK3/12GX 12GB (XMP) (3x4GB) KHX1600C9D3K4/16GX 16GB (XMP) (4GBx4) KHX1600C9D3P1K2/4G 1 DIMM 2 DIMM 4 DIMM DS - - - 1.
DDR3 1600MHz 第一章 供應商 型號 Silicon Power Silicon Power SP002GBLTU160V02 (XMP) SP004GBLTU160V02 (XMP) Apacer 78.B1GE3.9L10C KINGSTON KHX16C9K2/16 支援記憶體插槽(選配) 容量 SS/ 晶片 DS 廠牌 晶片型號 時序 電壓 2GB SS S-POWER 20YT5NG-1201 - - . . . 4GB DS S-POWER 20YT5NG-1201 - - 4GB DS Apacer KZZC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AM5D5908DEQSCK - - 16GB DS (8GBx2) - - 1.
DDR3 1333MHz 型號 容量 SS/DS 晶片 廠牌 晶片型號 時序 電壓 A-DATA AXDU1333GC2G9-2G (XMP) 4GB (2x2GB) SS - - 9-9-9-24 1.25V-1.35V (low voltage) A-DATA AD31333G002GMU 2GB DS - - 8-8-8-24 1.65-1.85V A-DATA AD63I1C1624EV 4GB DS A-Data 3CCA-1509A - - A-DATA AM2U139C4P2 4GB DS ADATA 3CCD-1509A EL1127T - - A-DATA SU3U1333W8G9-B 8GB DS ELPIDA J4208BASE-DJ-F - - Apacer 78.A1GC6.9L1 2GB DS Apacer AM5D5808DEWSBG - - Apacer 78.A1GC6.
DDR3 1333MHz 供應商 KINGSTON 第一章 KINGSTON KINGSTON KINGSTON 型號 KVR1333D3N9/1G (Low Profile) KVR1333D3N9/2G (Low Profile) KVR1333D3S8N9/2G KVR1333D3S8N9/2G-SP (Low Profile) KVR1333D3N9/2G (Low Profile) 支援記憶體插槽(選配) 容量 SS/DS 晶片 廠牌 晶片型號 時序 電壓 1GB SS ELPIDA J1108BDBG-DJ-F 9 1.5V . . . 2GB SS Hynix H5TQ2G83AFRH9C 9 - 2GB SS Micron IID77 D9LGK - 1.5V 2GB SS ELPIDA J2108BCSE-DJ-F - 1.5V . . . . . . . . . 2GB DS ELPIDA J1108BFBG-DJ-F 9 1.5V . . . . . . . .
DDR3 1333MHz 型號 容量 SS/DS 晶片 廠牌 晶片型號 時序 電壓 ASint SLA302G08-EDJ1C 4GB DS Asint SLA302G08-DJ1C - - ASint SLB304G08-EDJ1B 8GB DS Asint SLB304G08-DJ1B - - Elixir M2F2G64CB88B7N-CG 2GB SS Elixir N2CB2G80BN-CG - - Elixir M2F2G64CB88D7N-CG 2GB SS Elixir N2CB2G80DN-CG - - Elixir M2F2G64CB88G7N-CG 2GB SS Elixir N2CB2G80GN-CG - - Elixir M2F4G64CB8HB5N-CG 4GB DS Elixir N2CB2G80BN-CG - - Elixir M2F4G64CB8HD5N-CG 4GB DS Elixir N2CB2G80DN-CG - - Kingshare KSRP
SS - 單面顆粒記憶體 DS - 雙面顆粒記憶體 記憶體插槽支援: • 1 DIMM - 在 單通道記憶體設定中,支援安裝一組記憶體模組在任一插 槽,建議您安裝在 A2 插槽。 第一章 • 2 DIMM - 支 援安裝二組記憶體模組在紅色或黑色插槽,作為一對雙通 道設定,建議您安裝在 A2 與 B2 插槽以獲得更佳的相容性。 • 4 DIMM - 支 援安裝四組記憶體模組在紅色和黑色插槽,作為二對雙通 道設定。 請造訪華碩網站(http://tw.asus.
1.2.5 擴充插槽 第一章 安裝或卸除任何擴充卡之前,請暫時先將電腦的電源線拔出。如此可免 除因電氣殘留於電腦中而發生的意外狀況。 PCIEX1_1 PCIEX16/X8_1 PCIEX1_2 PCI1 PCIEX8_2 PCI2 7 PCIEX4_3 插槽編號 插槽說明 1 PCIe 2.0 x1_1 插槽 2 PCIe 3.0/2.0 x16/x8_1 插槽 3 PCIe 2.0 x1_2 插槽 4 PCI1 插槽 5 PCIe 3.0/2.0 x8_2 插槽 6 PCI2 插槽 7 PCIe 2.
VGA 設定 PCIe 3.0 執行模式 單顯示卡 CrossFireX™ 3-WAY CrossFireX™ x16 x16 x8 PCIEX16/X8_1 第一章 PCIEX8_2 _ _ x8 PCIEX4_3 _ x4 x4 • 當在執行 CrossFireX™ 模式時,建議提供系統充足的電力供應。 • 當您安裝多張顯示卡時,建議您將機殼風扇的排線連接至主機板上標 示 CHA_FAN1/2/3 的插座,以獲得更良好的散熱環境。 • 僅 FM2+ 處理器可支援 PCIe 3.0 速度。 當 PCIEX8_2 插槽被佔用時,PCIEX16/X8_1 插槽將切換為 x8 模式。 本主機板使用的中斷要求一覽表 A – B – C 共享 D – E – F – G – H – PCIe x8 – – – 共享 – – – – PCIe x4 共享 – – – – – – – PCIe x1_1 共享 – – – – – – – ASM USB3.
1.2.6 主機板上的內建開關 第一章 當您想要針對未安裝在機殼的裸板或是開放機殼的系統作效能調校時,主機板上內 建的開關按鈕與重置按鈕可以方便您迅速地開關機或是重置系統。這個專為超頻者及 專業玩家的設計,可以方便且不間斷地進行調教,並讓效能有效的提升。 1. 啟動開關 本主機板擁有啟動開關,讓您可以喚醒系統或啟動,並以亮燈顯示系統已接上 電源為啟動狀態,並提醒您在主機板移除或插入任何元件之前要先關機。下圖顯 示開關在主機板上的位置。 CROSSBLADE RANGER Power-on button 2.
3. MemOK! 按鈕 在主機板上安裝不相容的記憶體模組可能會導致啟動失敗,而且在系統記憶體 開關旁的 DRAM_LED 指示燈也會一直亮著。按一下 MemOK! 開關,MEMOK_LED 指示燈會開始閃爍自動進行記憶體調整直到成功啟動。 第一章 CROSSBLADE RANGER MemOK! button • 當 DRAM_LED 指示燈在記憶體沒有正確安裝時也會亮起時,在使用 MemOK! 功能前,請先關閉系統並重新安裝記憶體。 ® • MemOK! 開關在 Windows 作業系統下無法使用。 • 在調整過程中,系統會載入與測試故障安全防護記憶體設定。系統進 行一項故障安全防護設定測試約需要 30 秒的時間,若是測試失敗,系 統會重新啟動並測試下一個項目。MEMOK_LED 指示燈閃爍的速度增 加表示正在執行不同的測試階段。 • 由於記憶體調整需求,系統將於每一組設定值測試時重新啟動。在經 過整個調整過程後,若安裝的記憶體仍然無法啟動,DRAM_LED 指示 燈會持續亮著,請參考並替換使用手冊或華碩網站(tw.asus.
4. CMOS 組態資料清除按鈕(CLR_CMOS) 第一章 只有在系統因超頻而當機時按下本按鈕來清除 BIOS 設定資訊。 CROSSBLADE RANGER Clear CMOS button 5.
6. Sonic SoundStage 按鈕(SOUNDSTAGE) 按下按鈕可以啟用 Sonic SoundStage 功能。 第一章 SOUNDSTAGE CROSSBLADE RANGER Sonic SoundStage button • 當按下 Sonic SoundStage 後,Q-Code 指示燈上會顯示目前 Sonic SoundStage 檔案的設定檔。 • 如欲瞭解更多有關 Sonic SoundStage 功能介紹,請參考本手冊「軟體 支援」章節的說明。 7.
1.2.7 跳線選擇區 1. LN2 模式跳線 (3-pin LN2) 第一章 當啟動 LN2 模式,將會提供您的系統有效地修正在 POST 進行時的冷啟動錯 誤,以協助 CPU 從極端低溫下的凍結狀態回復,達成啟動。 LN2_MODE CROSSBLADE RANGER LN2 mode setting 1.2.8 內建 LED 指示燈 1.
2. Q 指示燈(BOOT_DEVICE_LED、VGA_LED、DRAM_LED、CPU_LED) Q 指示燈從主機板啟動後依序查看 CPU、記憶體、顯示卡與啟動裝置狀態。當 發現錯誤時,在該項目旁的指示燈則會亮燈直到問題解決。透過直覺的方式提供 這項友善的設計,能在短短幾秒內找到問題點。 第一章 BOOT_DEVICE_LED VGA_LED DRAM_LED CPU_LED CROSSBLADE RANGER CPU/DRAM/ BOOT_DEVICE/VGA/HD LED 3.
4. USB BIOS Flashback 指示燈(FLBK_LED) 第一章 這個指示燈會在 BIOS 更新時閃爍,且在更新完畢後熄滅。 FLBK_LED CROSSBLADE RANGER BIOS Flashback LED 5.
Q-Code 列表 第一章 1-30 Code 說明 00 Not used 01 Power on. Reset type detection (soft/hard).
Code 說明 5A Internal CPU error 5B Reset PPI is not available 5C – 5F Reserved for future AMI error codes E0 S3 Resume is stared (S3 Resume PPI is called by the DXE IPL) E1 S3 Boot Script execution E2 Video repost E3 OS S3 wake vector call E4 – E7 Reserved for future AMI progress codes E8 S3 Resume Failed E9 S3 Resume PPI not Found EA S3 Resume Boot Script Error EB S3 OS Wake Error EC – EF Reserved for future AMI error codes F0 Recovery condition triggered by firmware (Auto recove
Q-Code 列表(續) 第一章 1-32 Code 說明 6A System Agent DXE SMM initialization is started 6B – 6F System Agent DXE initialization (System Agent module specific) 70 PCH DXE initialization is started 71 PCH DXE SMM initialization is started 72 PCH devices initialization 73 – 77 PCH DXE Initialization (PCH module specific) 78 ACPI module initialization 79 CSM initialization 7A – 7F Reserved for future AMI DXE codes 90 Boot Device Selection (BDS) phase is started 91 Driver connecting is started
Code 說明 A7 SCSI Enable A8 Setup Verifying Password A9 Start of Setup AA Reserved for ASL (see ASL Status Codes section below) AB Setup Input Wait AC Reserved for ASL (see ASL Status Codes section below) AD Ready To Boot event AE Legacy Boot event AF Exit Boot Services event B0 Runtime Set Virtual Address MAP Begin B1 Runtime Set Virtual Address MAP End B2 Legacy Option ROM Initialization B3 System Reset B4 USB hot plug B5 PCI bus hot plug B6 Clean-up of NVRAM B7 Configurat
ACPI/ASL 檢查表 第一章 1-34 Code 說明 0x01 System is entering S1 sleep state 0x02 System is entering S2 sleep state 0x03 System is entering S3 sleep state 0x04 System is entering S4 sleep state 0x05 System is entering S5 sleep state 0x10 System is waking up from the S1 sleep state 0x20 System is waking up from the S2 sleep state 0x30 System is waking up from the S3 sleep state 0x40 System is waking up from the S4 sleep state 0xAC System has transitioned into ACPI mode.
1.2.9 內部連接埠 1.
2. USB 3.0 連接插槽(20-1 pin USB3_34) 這個插槽用來連接 USB 3.0 模組,可在前面板或後側連接埠擴充 USB 3.0 模 組。當您安裝 USB 3.0 模組,您可以享受 USB 3.0 的益處,包括有更快的資料傳 輸率最高達 5Gbps、對可充電的 USB 裝置更快的充電速度、最佳化能源效率,以 及與 USB 2.0 向下相容。 第一章 USB3_34 PIN 1 USB3+5V IntA_P2_SSRXIntA_P2_SSRX+ GND IntA_P2_SSTXIntA_P2_SSTX+ GND IntA_P2_DIntA_P2_D+ USB3+5V IntA_P1_SSRXIntA_P1_SSRX+ GND IntA_P1_SSTXIntA_P1_SSTX+ GND IntA_P1_DIntA_P1_D+ GND CROSSBLADE RANGER USB3.0 front panel connector USB 3.0 模組為選購配備,請另行購買。 您可以將華碩前面板 USB 3.0 模組連接至本接針,以得到前面板 USB 3.
3. USB 2.0 連接插槽(10-1 pin USB34, USB56, USB78) 第一章 這些 USB 擴充套件排線插槽支援 USB 2.0 規格,將 USB 模組排線連接至任何 一個插槽,然後將模組安裝到機殼後面板中開放的插槽。這些 USB 插槽與 USB 2.0 規格相容,並支援傳輸速率最高達 480 Mbps。 USB+5V USB_P3USB_P3+ GND NC USB+5V USB_P5USB_P5+ GND NC PIN 1 USB+5V USB_P6USB_P6+ GND USB+5V USB_P8USB_P8+ GND PIN 1 USB34 PIN 1 USB+5V USB_P4USB_P4+ GND USB56 USB+5V USB_P7USB_P7+ GND NC USB78 CROSSBLADE RANGER USB2.
4.
6.
7. 主機板電源插槽(24-pin EATXPWR, 8-pin EATX12V) 這些電源插槽用來連接一個 ATX 電源。電源所提供的連接插頭已經過特別設 計,只能以一個特定方向插入主機板上的電源插槽。找到正確的插入方向後,只 需穩穩地將之套進插槽中即可。 第一章 A A B EATX12V EATXPWR PIN 1 B +12V DC +12V DC +12V DC +12V DC GND GND GND GND +3 Volts +12 Volts +12 Volts +5V Standby Power OK GND +5 Volts GND +5 Volts GND +3 Volts +3 Volts GND +5 Volts +5 Volts +5 Volts -5 Volts GND GND GND PSON# GND -12 Volts +3 Volts PIN 1 CROSSBLADE RANGER ATX power connectors • 推薦您使用與 2.
8.
9. ROG Extension - ROG_EXT 插槽(18-1 pin ROG_EXT) 這組插槽可供 Front Base 與其它 ROG 裝置連接使用。 第一章 ROG_EXT CROSSBLADE RANGER ROG extension connector ‧ Front Base 為選購配備,請另行購買。 ‧ 請上網 tw.asus.com 以查詢有關 Front Base 的相關資訊。 10.
硬體裝置資訊 2.1 建立您的電腦系統 2.1.1 安裝主機板 2 本章節的圖示只能參考,主機板的結構可能會隨著型號而有所不同,但 是安裝的步驟仍然是相同的。 第二章 1. 安裝華碩 Q-Shield 擋板至機殼的後側 I/O 面板。 2.
3.
2.1.
2.3.
移除散熱片與風扇 3 2 4 第二章 1 5 華碩 CROSSBLADE RANGER 主機板使用手冊 2-5
2.3.
2.1.
2.1.
2.1.7 安裝前面板 I/O 連接埠 安裝華碩 Q-Connector 1 2 PWR Ground Reset Ground IDE_LED R SW POWE RESET SW 安裝 USB 2.0 連接埠 第二章 IDE_LED+ IDE_LED- 安裝前面板音效連接埠 USB 2.0 安裝 USB 3.0 連接埠 USB 3.
2.1.
2.2 BIOS 更新應用程式 2.2.1 USB BIOS Flashback USB BIOS Flashback 提供最簡單更新 BIOS 的方法。使用者可以輕鬆嘗試使用新的 BIOS 版本來進行超頻,不需要進入 BIOS 或作業系統,只要插入 USB 儲存裝置然後 按下 BIOS Flashback 按鈕三秒鐘,BIOS 程式就會自動在待機狀態下更新,從此以後 超頻無須再煩惱,並擁有無與倫比的便利性。 使用 USB BIOS Flashback: 1. 從華碩網站下載最新的 BIOS 檔案。 2. 將取得的 BIOS 檔案更名為 CROSSBLDR.CAP。 3. 將 CROSSBLDR.CAP 檔案複製到 USB 便攜儲存裝置的根目錄底下。 4. 將系統關機並將 USB 儲存裝置插入 USB BIOS Flashback 連接埠。 第二章 5. 按下 ROG Connect 按鈕並且當指示燈閃爍亮燈時放掉按鈕,此時則表示 BIOS Flashback 功能已經啟動。 6.
2.3 主機板後側面板與音效連接埠 2.3.1 後側面板連接埠 第二章 後面板連接埠 1. PS/2 鍵盤/滑鼠複合連接埠 2. 光纖 S/PDIF 輸出連接埠 3. VGA 顯示器連接埠 4. USB 3.0 連接埠 1 和 2。下方的連接埠並支援 USB BIOS Flasback 功能 5. RJ-45 網路連接埠* 6. USB 2.0 連接埠 1 和 2。上方的連接埠並支援 KeyBot 功能 7. HDMI 連接埠 8. DVI 連接埠 9. USB BIOS Flashback 按鈕 10. ASMedia® USB 3.0 連接埠 1 和 2 11.
• 由於 USB 3.0 的限制,USB 3.0 裝置只能在 Windows 作業系統環境 下,以及安裝過 USB 3.0 驅動程式後才能使用。 • USB 3.0 裝置只能用來作為資料磁碟。 • 強烈建議您將 USB 3.0 裝置連接至 USB 3.0 連接埠,才能讓您的 USB 3.0 裝置獲得更快更好的效能表現。 * 網路指示燈說明 Activity 連接指示燈 狀態 說明 速度指示燈 狀態 說明 關閉 關閉 連線速度 10Mbps 橘色燈號 已連接 橘色燈號 連線速度 100Mbps 閃爍 資料傳輸中 綠色燈號 連線速度 1Gbps 網路連接埠 第二章 沒有連接 ACT/LINK 速度 指示燈 指示燈 ** 2.1、4.1、5.1 或 7.1 聲道音效設定 連接埠 耳機/ 2.1 聲道 4.1 聲道 5.1 聲道 7.
連接耳機與麥克風 連接立體聲喇叭 第二章 連接2.
連接 4.1 聲道喇叭 華碩 CROSSBLADE RANGER 主機板使用手冊 第二章 連接 5.
連接 7.
2.4 第一次啟動電腦 1. 確認所有排線與接腳都接妥,然後蓋上機殼的外蓋。 2. 確定所有的開關都已關閉 3. 將電源線接上機殼背面的電輸入插座。 4. 情況許可的話,最好將電源線路上加接突波吸收/保護器。 5. 您可以先開啟以下周邊的電源: a. 顯示屏 b. 外接式 SCSI 連接埠周邊裝置(從串連的最後端開始) c. 系統電源(ATX 的電源不會因為送電而馬上動作,而是等待面板上的按鈕 動作後才會工作) 第二章 6.
第二章 2-18 第二章:硬體裝置資訊
BIOS 程式設定 3.
3.
3.2.1 EZ Mode 本主機板的 BIOS 設定程式的預設值為 EZ Mode。您可以在 EZ Mode 中查看系統 基本資料,並可以選擇顯示語言、喜好設定及開機裝置順序。若要進入 A d v a n c e d Mode,請點選 Exit/Advanced Mode 並選擇 Advanced Mode 或按下 F7 熱鍵進入 Advanced BIOS 設定。 進入 B I O S 設定程式的畫面可個性化設定,請參考「3.
3.2.
功能表列 BIOS 設定程式最上方各選單功能說明如下: My Favorites 本項目將記錄時常使用的系統設定及設定值。 Extreme Tweaker 本項目提供超頻設定。 Main 本項目提供系統基本設定。 Advanced 本項目提供系統進階功能設定。 Monitor 本項目提供溫度、電源及風扇功能設定。 Boot 本項目提供啟動磁碟設定。 Tool 本項目提供特殊功能設定。 Exit 本項目提供離開 BIOS 設定程式與出廠預設值還原功能。 選單項目 於功能表列選定選項時,被選擇的功能將會反白,即選擇「Main」選單所出現的項 目。 點選選單中的其他項目(例如:My Favorites、Extreme Tweaker、Advanced、 Monitor、 Boot 與 Exit)也會出現該項目不同的選項。 子選單 在選單畫面中,若功能選項前面有一個小三角形標記,代表此為子選單,您可利用 方向鍵來選擇,並按下 鍵來進入子選單。 語言 第三章 這個按鈕位在功能表列的上方,用來選擇 BIOS 程式介面顯示的語言。點選這個按 鈕來選擇您想要的 BIOS
快速筆記(F9) 按下此按鈕,可讓您針對已在 BIOS 中進行的設定輸入筆記。 • 快速筆記不支援以下鍵盤功能:刪除、剪下、複製與貼上。 • 您只能使用英文字母與數字來輸入筆記。 操作功能鍵 這個按鈕位在功能表列的上方,包含有 BIOS 程式設定的導引方向鍵,使用箭頭按 鍵來選擇選單中的項目並更改設定。 捲軸 在選單畫面的右方若出現如右圖的捲軸畫面,即代表此頁選項超過可顯示的畫面, 您可利用上/下方向鍵或是 PageUp/PageDown 鍵來切換畫面。 線上操作說明 在選單畫面的右上方為目前所選擇的作用選項的功能說明,此說明會依選項的不同 而自動更改。使用 按鍵來抓取 BIOS 螢幕畫面,並儲存至便攜式儲存裝置。 設定值 這些存在於選單中的設定值是提供給使用者選擇與設定之用。這些項目中,有的 功能選項僅為告知使用者目前執行狀態,並無法更改,那麼此類項目就會以淡灰色顯 示。而可更改的項目,當您使用方向鍵移動項目時,被選擇的項目以反白顯示,代表 這是可更改的項目。 當可更改的項目已選擇時將會反白,請按下 鍵以顯示詳細的設定選項。 上次修改的設定值 按下此按鈕可查看您上次修改
3.3 我的最愛(My Favorites) 在此選單中您可以輕鬆儲存並使用您偏好的 BIOS 項目設定。 新增項目至我的最愛 1. 在鍵盤按下 鍵或在 BIOS 程式畫面中點選 圖畫面。 第三章 請依照以下步驟新增項目至我的最愛: 來啟動設定樹狀 2.
3.4 Extreme Tweaker 選單(Extreme Tweaker) 本選單可讓您設定超頻功能的相關選項。 注意!在您設定本進階選單的設定時,不正確的設定值將導致系統功能 異常。 以下項目的預設值會隨著您所安裝的處理器與記憶體而不同。 第三章 Ai Overclock Tuner [Auto] 本項目可以讓您設定 CPU 的超頻選項來達到您所想要的 CPU 外頻。請選擇以下任 一種預設的超頻選項: [Auto] 自動載入系統最佳化設定值。 [Manual] 可讓您獨立設定超頻參數。 [D.O.C.P.] CPU 匯流排、處理器倍頻與記憶體參數將自動優化。 • 當您安裝支援 XMP 的記憶體模組時,[D.O.C.P.
APU Frequency [100] 本項目可讓您調整 A P U 頻率以提昇系統效能。您可以使用 <+> 與 <-> 鍵調整 數值,或者也可以使用數位鍵盤輸入所需的數值。數值變更的範圍由 90.0M H z 至 300.
Primary Timings DRAM CAS# Latency [Auto] 設定值有:[Auto] [5] – [16] DRAM RAS# to CAS# Delay [Auto] 設定值有:[Auto] [2] – [19] DRAM RAS# PRE Time [Auto] 設定值有:[Auto] [5] – [19] DRAM RAS# ACT Time [Auto] 設定值有:[Auto] [8] – [42] DRAM COMMAND Mode [Auto] 設定值有:[Auto] [1] – [2] Secondary Timings DRAM Row Cycle Time [Auto] 設定值有:[Auto] [10] – [58] DRAM READ to PRE Time [Auto] 設定值有:[Auto] [4] – [12] DRAM RAS# to RAS# Delay [Auto] 設定值有:[Auto] [1] – [9] DRAM WRITE to READ Delay [Auto] 設定值有:[Auto] [4] – [12] 第三章 DRAM C
address/command drive strength [Auto] 設定值有:[Auto] [1.00x] [1.25x] [1.50x] [2.00x] MEMCLK drive strength [Auto] 設定值有:[Auto] [1.00x] [1.25x] [1.50x] [2.00x] Data drive strength [Auto] 設定值有:[Auto] [0.75x] [1.00x] [1.25x] [1.50x] DQS drive strength [Auto] 設定值有:[Auto] [0.75x] [1.00x] [1.25x] [1.
CPU/NB Load Line Calibration [Auto] 本項目用來選擇 CPU/NB Load Line 校準模式。設定值有:[Auto] [Regular] [Medium] [High] [Extreme] CPU Current Capability [100%] 本項目為超頻提供更寬的全供電範圍。較高的設定值可得到更寬的供電範圍并 同時擴大超頻頻率範圍。設定值有:[100%] [110%] [120%] [130%] [140%] CPU/NB Current Capability [100%] 本項目為超頻提供更寬的全供電範圍。較高的設定值可得到更寬的供電範圍并 同時擴大超頻頻率範圍。設定值有:[100%] [110%] [120%] [130%] CPU Power Phase Control [Optimized] 本項目可依據 CPU 的需要控制電源相位。 [Standard] 依據處理器負載進行相位控制。 [Optimized] 載入華碩最佳化相位調整設定檔。 [Extreme] 全相位模式。 [Manual Adjustment] 手動調整。
DRAM Power Phase Control [Optimized] 本項目用來設定 DRAM 電源相位控制。 [Optimized] 可讓您設定華碩最優化的相位調整設定檔。 [Extreme] 設定為全相位模式。 CPU Voltage [Offset Mode] [Manual Mode] 設定固定的 CPU 電壓。 [Offset Mode] 設定偏移電壓。 CPU Offset Mode Sign [+] 只有當 CPU Voltage 項目設定為 [Offset Mode] 時此項目才會出現。 [+] 設定正數值偏移電壓。 [–] 設定負數值偏移電壓。 CPU Offset Voltage [Auto] 只有當 CPU Voltage 項目設定為 [Offset Mode] 時此項目才會出現,用來設定 偏移電壓。設定範圍為 -0.500V 到 0.500V,以 0.
SB 1.1V Voltage [Auto] 本項目用來設定南橋 1.1V 電壓。設定值可在 1.1V 至 1.4V 範圍內,以 0.01V 為增 量調整。 1.1VSB Voltage [Auto] 本項目用來設定 1.1Vsb 電壓。設定值可在 1.1000V 至 1.4000V 範圍內,以 0.1V 為增量調整。 APU1.2V Voltage [Auto] 本項目用來設定 APU 1.2V 電壓。設定值可在 1.2000V 至 1.8000V 範圍內,以 0.01V 為增量調整。 VDDA Voltage [Auto] 本項目用來設定 VDDA 電壓。設定值可在 2.5000V 至 2.8000V 範圍內,以 0.1V 為增量調整。 NB VREF Voltage [Auto] 本項目用來設定 NB VREF 電壓。設定值以 0.005V 為增量調整。 DRAM VREFCA Voltage [Auto] 本項目用來設定 DRAM VREFCA 電壓。設定值以 0.
3.
安全性選單(Security) 本選單可讓您改變系統安全設定。 • 若您忘記設定的 BIOS 密碼,可以採用清除 CMOS 即時時脈(RTC)記 憶體。請參考「1.2.
Administrator Password(設定系統管理者密碼) 當您設定系統管理者密碼後,建議您先登入您的帳戶,以免 BIOS 設定程式中的某 些資訊無法查看或變更設定。 請依照以下步驟設定系統管理者密碼(Administrator Password): 1. 請選擇 Administrator Password 項目並按下 。 2. 由 Create New Password 視窗輸入欲設定的密碼,輸入完成按下 。 3. 請再一次輸入密碼以確認密碼正確。 請依照以下步驟變更系統管理者密碼(Administrator Password): 1. 請選擇 Administrator Password 項目並按下 。 2. 由 Enter Current Password 視窗輸入密碼並按下 。 3. 由 Create New Password 視窗輸入新密碼,輸入完成按下 。 4.
3.
3.6.
IOMMU [Disabled] 將此項目設為 [Enabled] 來顯示 IOMMU 模式。設定值有:[Enabled] [Disabled] Bank Interleaving [Enabled] 本項目用來開啟或關閉 bank memory interleaving 功能。設定值有:[Enabled] [Disabled] Channel Interleaving [Enabled] 本項目用來開啟或關閉 channel memory interleaving 功能。設定值有:[Enabled] [Disabled] Core Leveling Mode [Automatic mode] 本項目用來調整每顆 CPU 或每個計算單元的核心數。設定值有:[Automatic mode] [One core per processor] [One Compute Unit] [One core per Compute Unit] 3.6.
OnChip SATA Channel [Enabled] 本項目用來開啟或關閉內建 SATA 連接埠通道。設定值有:[Disabled] [Enabled] OnChip SATA Type [AHCI] 本項目可設定 Serial ATA 硬體裝置的相關設定。 [IDE] 若要將 Serial ATA 作為 Parallel ATA 實體儲存連接埠,請將本項 目設定為 [IDE]。 [RAID] 若要在 Serial ATA 硬碟設定 RAID 磁碟陣列,請將本項目設定為 [RAID]。 [AHCI] 若要 Serial ATA 硬體裝置使用 Advanced Host Controller Interface (AHCI) 模式,請將本項目設定為 [AHCI]。AHCI 模式可讓內建的儲 存裝置啟動進階的 Serial ATA 功能,透過原生指令排序技術來提 升工作效能。 SATA Port 5, 6, 7, 8 [AHCI] 只有當 OnChip SATA Type 項目設為 [AHCI] 時此項目才會出現。若連接埠 5、 6、7、8 設為 [AHCI],這些連接埠只能在作業系統下
3.6.
3.6.
3.6.
3.6.
3.6.7 網路堆棧(Network Stack) Network Stack [Disabled] 本項目可以讓您啟動或關閉 UEFI 網路堆棧。設定值有:[Disabled] [Enabled]。 3.6.
3.7 監控選單(Monitor) 監控選單可讓您查看系統溫度/電力狀況,並且對風扇做進階設定。 Qfan Tuning 點選本項目會自動檢測最低速度並設定每個風扇的最小工作週期。 Anti Surge Support [Enabled] 本項為啟用過電壓保護(OVP)與低電壓保護(UVP)功能。設定值有:[Disabled] [Enabled] Voltage Monitor CPU Voltage; 3.
Fan Speed Control CPU Q-Fan Control [Auto] 本項目用來設定 CPU Q-Fan 執行模式。 [Auto] 檢測安裝的處理器風扇類型並自動切換控制模式。 [Disabled] 關閉 CPU Q-Fan 控制功能。 [DC Mode] 當安裝 3-pin 的處理器風扇時,請選擇本項目來使用 Q-Fan 控制的 DC 模式。 [PWM Mode] 在 PWM 模式啟動 CPU Q-Fan 控制來使用 4-pin 處理器風扇。 以下的項目只有在 CPU Q-Fan Control 設為 [Auto] 時才會出現。 CPU Fan Speed Low Limit [200 RPM] 項目可以讓您設定當 CPU 風扇低於所選擇的轉速時,系統會發送警告資訊 本 通知。設定值有:[Ignore] [100 RPM] [200 RPM] [300 RPM] [400 RPM] [500 RPM] CPU Fan Profile [Standard] 項目只有在 CPU Q-Fan Control 設定為 [Enabled] 時才會出現,用來設定處理 本 器風
CPU Fan Min.
Chassis Fan 1/2/3 Lower Temperature [40] 顯示機殼風扇溫度的最小值。 Chassis Fan 1/2/3 Min. Duty Cycle(%) [60] 用 <+> 與 <-> 鍵調整機殼風扇的最小工作週期。數值的更改範圍由 60% 至 使 100%。當機殼溫度低於 40℃ 時,機殼風扇會以最小工作週期運轉。 Allow Fan Stop [Disabled] 本項目用來讓您的風扇在來源溫度掉到最低溫以下時可以 0% 工作週期執行。 設定值有:[Disabled] [Enabled]。 3.
USB Support [Partial Initialization] [Disabled] 只有在作業系統啟動後所有 USB 裝置才可用,可獲得最快 的開機自我測試(POST)時間。 [Full Initialization] 在開機自我測試(POST)過程中所有 USB 裝置都可用。此 過程將延長開機自我測試(POST)時間。 [Partial Initialization] 只有連接了鍵盤與滑鼠的 USB 連接埠才會被偵測到, 可獲得較快的開機自我測試(POST)時間。 PS/2 Keyboard and Mouse Support [Auto] 提供您關閉或在 POST(開機自我測試)過程中可以完整控制 PS/2 裝置。 Network Stack Driver Support [Disabled] [Disabled] 在 POST 時略過載入網路協定堆棧驅動器。 [Enabled] 在 POST 時載入網路協定堆棧驅動器。 Next Boot after AC Power Loss [Normal Boot] [Normal Boot] 在電源中斷後回復至正常啟動速度。
DirectKey (DRCT) [Enabled] [Disabled] 關閉 DirectKey 功能。當您按下 DirectKey 按鈕時,只能控制系統開 啟或關閉。 [Enabled] 當您按下 DirectKey 按鈕時系統將啟動並直接進入 BIOS 設定程式。 您需將機殼上 RESET 按鈕的 2-pin 接頭連接到主機板上的 DRCT 連接埠 才可支援本功能。 Option ROM Messages [Force BIOS] [Force BIOS] 選購裝置韌體程式資訊會強制在開機顯示。 [Keep Current] 選購裝置韌體程式資訊只有在該程式供應商設定為顯示時,才會在 開機時顯示。 Interrupt 19 Capture [Enabled] 本項目用來使用隨選記憶體(ROM)限制中斷 19。設定值有:[Disabled] [Enabled] Setup Mode [EZ Mode] [Advanced Mode] 將進階模式(Advanced Mode)畫面設為進入 BIOS 設定程式的預 設畫面。 [EZ Mode] 將 EZ 模式(EZ Mode)畫面設為進
Boot from PCI-E/PCI Expansion Devices [Legacy OPROM first] 項目用來設定想要執行的 PCIe/PCI 擴充裝置。設定值有:[Legacy OpROM 本 first] [UEFI driver first]Secure Boot Secure Boot ® 本項目用來設定 Windows 安全啟動的相關參數以及管理系統金鑰,以提升系統在 開機自我測試(POST)時的安全性,避免受到未授權的使用者與惡意軟體的危害。 OS Type [Windows UEFI mode] ® [Windows UEFI Mode] 本項用來選擇安裝的作業系統。執行 Microsoft ® 安全啟動檢查。只有在 Windows UEFI 模式或其 ® 他 Microsoft 安全啟動相容作業系統中啟動時選 擇此項目。 [Other OS] 在 Windows® 非 UEFI 模式中啟動時獲得最佳功 能。Microsoft ® 安全啟動功能只可在 Windows ® UEFI 模式下正確執行。 Key Management Clear Secure Bo
Delete the KEK 本項目用來從系統刪除 KEK。設定值有:[Yes] [No] Load KEK from File 本項目用來載入從 USB 儲存裝置載入已下載的 KEK。 Append KEK from file 本項目用來從儲存裝置載入額外的 KEK 用於附加 db 與 dbx 載入管理。 KEK 檔案必須格式化為一個基於時間認證變量的 UEFI 變量結構。 DB Management db(認證簽名資料庫)列出了您可以在單台電腦載入的 UEFI 應用程式、作業 系統載入器與 UEFI 驅動程式的簽名者或映像檔案。 Delete the db 本項目用來從系統刪除 db。設定值有:[Yes] [No] Load db from File 本項目用來從 USB 儲存裝置載入已下載的 db。 Append db from file 本項目用來從儲存裝置載入一個額外的 db 以安全載入更多的映像檔案。 db 檔案必須格式化為一個基於時間認證變量的 UEFI 變量結構。 DBX Management 第三章 dbx(撤銷簽名資料庫)列出了 db 項目中不再被信任且不能被載入的被禁止
Boot Option Priorities 本項目讓您自行選擇開機磁碟並排列開機裝置順序。依照 1st、2nd、3rd 順序分別 代表其開機裝置順序,而裝置的名稱將因使用的硬體裝置不同而有所差異。 • 開機時您可以在 ASUS Logo 出現時按下 選擇啟動裝置。 • 欲進入 Windows 安全模式,請在華碩圖示出現時按下 ,或在開機 自我測試(POST)后按下 。 Boot Override 第三章 這些項目顯示可用裝置。螢幕上顯示的裝置數量依據系統中安裝的裝置而定。選擇 一個項目,從該裝置啟動。 華碩 CROSSBLADE RANGER 主機板使用手冊 3-35
3.9 工具選單(Tool) 本工具選單可以讓您針對特別功能進行設定。請選擇選單中的選項並按下 鍵來顯示子選單。 3.9.1 ASUS EZ Flash 2 Utility 本項目可以讓您啟動華碩 EZ Flash 2 程式。 請參考 華碩 EZ Flash 2 的說明。 3.9.
顯示可使 用的SSD 點選以開始 SSD Secure Erase 操作 狀態定義:: Frozen(凍結): 這個狀態為 BIOS 的保護措施, BIOS 守衛在啟動前凍結 沒有密碼保護的驅動程式。如果驅動程式被凍結,則必 須關機或必須將電腦用 Secure Erase. 執行硬體重置。 Locked(鎖定): 若 Secure Erase 執行不完整或已經停止,SSD 可能 被鎖住。這可能需要使用由華碩定義的第三方不同密 碼。您必須在使用 S e c u r e E r a s e 前,先使用軟體將 SSD 解鎖。 3.9.3 Setup Animator [Enabled] 3.9.
3.9.
3.9.
3.10 離開 BIOS 程式(Exit) 本選單可讓您讀取 BIOS 程式出廠預設值與離開 BIOS 程式。你也可以由 Exit 選單 進入 EZ Mode。 Load Optimized Defaults 本項目可讓您載入 BIOS 程式設定選單中每個參數的預設值。當您選擇本項目或按 下 ,便會出現一個確認對話視窗,選擇 Yes 以載入預設值。 第三章 Save Changes & Reset 當您完成對 BIOS 設定程式所做的變更後,請選擇本項目或按下 ,將會出現 一個確認對話視窗,請選擇 Yes 以儲存設定並離開 BIOS 設定程式。 Discard Changes & Exit 本項目可讓您放棄所做的變更,並回復原先儲存的設定。在選擇本項目或按下 鍵後,將會出現一個確認對話視窗,請選擇 Yes 以放棄任何設定並載入原先儲 存的設定,同時離開 BIOS 設定程式。 Launch UEFI Shell from filesystem drives 本項目可以讓您由含有資料系統的裝置中啟動 UEFI Shell(shellx64.
3.11 管理、更新您的 BIOS 程式 華碩網站上提供有最新的 B I O S 程式,可以強化系統的穩定度、相容性或執行效 能,但是執行 BIOS 程式更新是具有潛在性風險的,若是使用現有版本的 BIOS 程式 都沒有發生問題時,請勿手動執行更新 BIOS 程式。不適當的 BIOS 程式更新可能會 導致系統啟動失敗。若有需要,請使用以下各節的方法來更新您的 BIOS 程式。 請造訪華碩網站(http://tw.asus.com)來下載本主機板最新的 BIOS 程 式。 1. EZ Update:在 Windows 作業系統中更新 BIOS 程式。 2. ASUS EZ Flash 2:使用 USB 隨身碟來更新 BIOS。 3. ASUS CrashFree BIOS 3:當 BIOS 檔案丟失或損毀時,可以使用 USB 隨身碟或 主機板的驅動程式與公用程式光碟來更新 BIOS。 4. ASUS BIOS Updater:在 DOS 環境下,使用主機板驅動程式與公用程式光碟與 USB 隨身碟來更新並備份 BIOS。 上述軟體請參考相關章節的詳細使用說明。 3.11.
3.11.2 使用華碩 EZ Flash 2 升級 BIOS 程式 華碩 EZ Flash 2 程式讓您能輕鬆地升級 BIOS 程式,可以不必再到作業系統模式下 執行。 在使用此程式前,請從華碩網站上(http://tw.asus.com)下載最新的 BIOS 檔案。 請依照以下步驟透過 EZ Flash 2 更新 BIOS 程式: 1. 將儲存有最新的 BIOS 檔案的 USB 隨身碟插入 USB 連接埠。 2. 進入 BIOS 設定程式的 Advanced Mode,選擇 Tool > ASUS EZ Flash Utility,接 著請按下 鍵。 第三章 3. 請使用 鍵操控至 Drive 欄位。 4. 請利用上/下方向鍵找到存放有最新 B I O S 檔案的 U S B 隨身碟,接著請按下 鍵。 5. 請使用 鍵操控 Folder Info 區域。 6.
• 本功能只支援採用 FAT 32/16 格式的單一磁區 USB 隨身碟。 • 當更新 BIOS 時,請勿關閉或重置系統以避免系統啟動失敗。 請讀取出廠預設值來保持系統的穩定。請參閱 3.10 離開 BIOS 程式 一節 中 Load Optimized Defaults 項目的詳細說明。 3.11.3 使用 CrashFree BIOS 程式回復 BIOS 程式 華碩最新自行研發的 CrashFree BIOS 工具程式,讓您在當 BIOS 程式和資料被病 毒入侵或毀壞時,可以輕鬆地從驅動程式與公用程式光碟,或是從含有最新或原始 BIOS 檔案的 USB 隨身碟中回復 BIOS 程式的資料。 • 使用此程式前,將移動裝置中的 BIOS 檔案重命名為: CROSBLDR.CAP。 • 驅動程式與公用程式光碟中的 BIOS 可能不是最新版本。請從華碩網站 上(http://tw.asus.com)下載最新的 BIOS 檔案。 回復 BIOS 程式: 請依照下列步驟回復 BIOS 程式: 1. 開啟系統。 2.
3.11.4 華碩 BIOS Updater 華碩 BIOS Updater 讓您可以在 DOS 環境下更新 BIOS 程式,還可以用來複製現有 的 BIOS 檔案,當您的 BIOS 程式在更新過程中失敗或中斷時,可作為備份使用。 以下的程式畫面只能參考,您實際操作的畫面可能會與手冊所示的畫面 不盡相同。 更新 BIOS 之前 1. 準備本主機板的驅動程式與公用程式光碟,以及 F A T32/16 格式且單一磁區的 USB 隨身碟。 2. 造訪華碩網站 http://support.asus.com 下載最新的 BIOS 程式與 BIOS Updater,然 後儲存在 USB 隨身碟。 • DOS 環境下不支援 NTFS 格式,請勿將 BIOS 檔案與 BIOS Updater 儲存在 NTFS 格式的 USB 隨身碟。 • 請勿將 BIOS 程式儲存在磁片,以免磁片的容量不夠使用。 3. 將電腦關機。 4. 請確認電腦配備有光碟機。 DOS 環境下啟動系統 1. 將存有最新 BIOS 檔案與 BIOS Updater 的 USB 儲存裝置插入 USB 連接埠。 2.
4. 當啟動資訊出現時,在五秒鐘內按下 鍵來進入 FreeDOS 跳出視窗。 ISOLINUX 3.20 2006-08-26 Copyright (C) 1994-2005 H. Peter Anvin A Bootable DVD/CD is detected. Press ENTER to boot from the DVD/CD. If no key is pressed within 5 seconds, the system will boot next priority device automatically. boot: 5. 當 FreeDOS 出現時,輸入命令 d:,然後按下 ,將磁碟 C(光碟機)改為 磁碟 D(USB 儲存裝置)。 Welcome to FreeDOS (http://www.freedos.org)! C:/> d: D:/> 更新 BIOS 檔案 請依照以下步驟更新 BIOS 檔案: 1.
3. 按下 按鍵切換畫面,使用 按鍵選擇 BIOS 檔案,然 後按下 ,BIOS Updater 檢查所選的 BIOS 檔案後,會跳出確認更新的畫 面。 Are you sure to update BIOS? Yes No 4. 選擇 Y es 然後按下 ,當 BIOS 更新完成時,按下 離開 BIOS Updater 並重新啟動電腦。 請勿在 BIOS 進行更新時,執行關機或重新啟動電腦,以防止 BIOS 更新 失敗。 • BIOS Updater 1.
軟體支援 4.1 4 安裝作業系統 • 本主機板支援 Microsoft® Windows® 7、Windows® 8、Windows® 8.1 32/64-bit 作業系統(OS,Operating System)。 • 由於主機板和周邊硬體裝置的選項設定繁多,本章只就軟體的安裝程 式供您參考。您也可以參閱您使用的作業系統說明文件以取得更詳盡 的資訊。 4.2 驅動及公用程式 DVD 光碟資訊 隨貨附贈的驅動及公用程式 DVD 光碟包括了數個有用的軟體和應用程式,將它們 安裝到系統中可以強化主機板的效能。 華碩驅動程式及公用程式 DVD 光碟的內容會不定時地更新,但不另行通 知。如欲得知最新的資訊,請造訪華碩的網站 http://tw.asus.com。 4.2.1 執行驅動及公用程式 DVD 光碟 當在 Windows® 7、Windows® 8 或 Windows® 8.1 作業系統中執行驅動程 式及公用程式 DVD 光碟之前,請先確認您擁有管理者帳號。 請依照以下步驟來執行驅動及公用程式 DVD 光碟: 1. 將驅動程式及公用程式 DVD 光碟放入光碟機。 第四章 2.
驅動及公用程式 DVD 光碟主選單 軟體選單顯示本主機板支 援的應用程式與其他軟體 驅動程式選單顯示系統檢測到連 接裝置可使用的驅動程式,請安 裝適當的驅動程式來使用該裝置 手冊選單顯示本光碟所附的使用 手冊,點選想要的項目來開啟使 用手冊的檔案夾 點選聯絡資訊標籤頁顯 ROG 相關影片 示與華碩聯絡的資訊 點選以安裝 所有項目 點選以顯示產 品的相關資訊 點選圖示顯 示 DVD/主 機板資訊 點選安裝各項 驅動程式 4.2.2 取得軟體使用手冊 您可在驅動程式 DVD 光碟中找到軟體使用手冊,請依照以下步驟來取得您需要的 軟體使用手冊。 軟體使用手冊檔案為 P D F 格式,在您開啟使用手冊檔案前,請先安裝 Adobe® Acrobat® Reader 瀏覽軟體。 1. 點選 M a n u a l(使用手冊)項目, 由列表中選擇 ASUS Motherboard Utility Guide。 第四章 2.
3. 請由數個語言的使用手冊中選擇您 需要的使用手冊。 本章節的圖示只能參考,在驅動程式 D V D 光碟中所包含的軟體使用手 冊,會依照您所購買的型號而有不同。 4.3 軟體資訊 驅動及公用程式光碟中大部分的應用程式都會有安裝指導精靈來幫助您一步一步輕 鬆地安裝軟體。您也可以由個別軟體所提供的在線說明檔或讀我檔取得安裝方式及其 他資訊的說明。 4.4 華碩 AI Suite 3 程式 透過友善的使用者介面,華碩 AI Suite 3 程式將所有的華碩獨家功能整合在一個軟 體套件中,可以同時操控並執行各項功能及應用程式。 安裝華碩 AI Suite 3 程式 在您將 AI Suite 3 程式安裝至 Windows 7、Windows 8 或 Windows 8.1 作業系統之前,請先確認您擁有管理者帳號。 請依照下列步驟將華碩 AI Suite 3 程式安裝到您的電腦: ® Windows 7 作業系統 1. 將驅動程式及公用程式 DVD 光碟放入光碟機。 第四章 2. 在自動安插通知(AutoPlay)對話框中點選執行 ASSETUP.exe。 3.
Windows 8 與 Windows 8.1 作業系統 1. 將驅動程式及公用程式 DVD 光碟放入光碟機,然後依照螢幕的指示來完成安裝 步驟。 2. 從驅動程式及公用程式 DVD 光碟主選單中選擇應用程式(Utilites)標籤頁,然 後點選 AI Suite 3。 3. 請依照螢幕的指示執行。 若是驅動程式及公用程式 DVD 光碟主選單沒有出現,請參考以下步驟: a. 到 開始 畫面,然後點選或輕觸桌面的應用程式。 b. 在桌面的左下角點選或輕觸 File Explorer 或雙按 設定。 ,然後選擇 DVD 磁碟並輕觸 執行華碩 AI Suite 3 程式 Windows 7 作業系統 從桌面點選 開始 > 所有應用程式 > ASUS > AI Suite 3> AI Suite 3。 您也可以在 Windows 7 的工作列中點選 。 Windows 8 與 Windows 8.
AI Suite 3 主畫面 AI Suite 3 主畫面提供您輕鬆進入控制和了解電腦發生了什麼狀況 - 能提供您將效 能做最佳化設定,並同時確保系統的穩定性。 AI Suite 主畫面包含一個快速進入的主選單工作列,可以讓您快速開啟任何集中在 圖示便可以開啟此主選單工作列。 這裡的華碩應用程式。點選主畫面右上方 AI Suite 3 主畫面只能參考,請以您實際看到的畫面為準。 點選以啟動 AI Suite 3 選單工作列 AI Suite 3 主選單工作列 雙智慧處理器 5 USB 3.0 Boost EZ Update 系統資訊 USB Charger+ USB BIOS Flashback 推播資訊 版本資訊 第四章 • 本章節的畫面只能參考,請以您實際看到的畫面為準。 • 請參考驅動及公用程式 DVD 光碟中軟體手冊的說明,或造訪華碩網 站 http://tw.asus.
4.
TPU(TurboV Processing Unit) 華碩 TPU 可讓您手動調整 CPU 頻率、CPU Cache 與 Core 頻率、DRAM 頻率以及 相關電壓值以增加系統穩定並提升效能表現。 在調整 CPU 電壓前,請先參考 CPU 說明文件。設定過高電壓可能會造 成 CPU 永久損害;電壓設定過低可能會導致系統不穩定。 為求系統穩定,TurboV 中做的所有更改都不會儲存至 BIOS 程式中,同 時也不會保留至下次啟動。請使用 Save Profile 功能儲存您自訂的超頻設 定,並在啟動後手動載入設定檔。 使用 TPU CPU Frequency 點選 或 以調整 APU Frequency 和 CPU Ratio 點選 或 以調整電壓 點選以套用更改 點選以將更改 儲存至設定檔 點選以取消更改 第四章 點選以載入已 儲存的設定檔 華碩 CROSSBLADE RANGER 主機板使用手冊 4-7
Fan Xpert 3 FAN Xpert 3 提供您自行做風扇設定來達到更佳冷卻效果與更安靜的電腦使用環境。 透過風扇自動調節功能,華碩 Fan Xpert 3 會自動調整處理器與風扇的設定,以達到最 好的散熱效能。 華碩 Fan Xpert 3 亦支援處理器和風扇硬體層級的 PWM/PC 複合模式,您還可以在 預設最小的狀態下降低處理器風扇轉速,以達到無聲操作的處理器風扇運轉速度。 點選任一視 窗以選擇您 要自訂的風 扇類型 點選以將風扇 轉速調至最大 點選以將風扇速度 設定為 silent 模式 點選以調整風扇噪音 與轉速間的平衡設定 點選以切換不 同風扇畫面 點選提高風扇轉 速以獲得更佳冷 卻效果 第四章 4-8 第四章:軟體支援
DIGI+ Power Control 程式 華碩 DIGI+ Power Control 程式讓您可以輕鬆的調整處理器與記憶體電源設定,確 保效能與穩定性,同時提供最佳電源使用效能。 以下面只能參考,請以您實際看到的畫面為準。 點選後可以切 換不同畫面 點選以不做更改 點選以應用更改 CPU Power Phase Control CPU Power Phase Control 透過在重系統負載情況下增加相式數以得到更快更 佳的散熱效能;在輕系統負載情況下減少相式數以增加 VRM 效率。 CPU Voltage Frequency 啟用 spread spectrum 可以增強系統穩定性。 CPU Power Thermal Control 較高的溫度提供更廣的 CPU 電力散熱範圍,並擴充超頻的容忍度來提升超 頻的潛力。 CPU/NB Current Capability CPU Current Capability 針對超頻提供了較寬的總功率範圍。數值越高,則帶 來更廣的功率範圍,同時也能擴大超頻頻率範圍。 CPU/NB Load-line Calibration 提供您調整電壓範圍來控
Turbo App(Turbo 應用程式) 本程式可以提供自訂系統效能、網路優先順序與應用程式的音效設定。 當 Turbo App 列表裡有某個應用程式,您可以指定 CPU 頻率、決定網路優先順序 與定義所選擇的音效設定。 點選以更新正在執行的應用程式列表 點選以決定應用程式(.
EPU(Energy Processing Unit) EPU 是一個即時系統的省電晶片,可以自動檢測目前的系統負載,並且智慧地調節 電量使用。此功能提供系統完整的最佳化省電、降低風扇噪音,並延長硬體元件的使 用壽命。 使用 EPU 點選以進行 Auto 模式裡的設定 勾選以開啟 Away Mode 點選 或 以 設定電源計劃 點選 以選擇 風扇設定檔 點選以啟用預設值 點選以不作更改 點選以套用更改 第四章 勾選 Voltage Decrement 設定 華碩 CROSSBLADE RANGER 主機板使用手冊 4-11
華碩 USB 3.0 Boost 程式 華碩 USB 3.0 Boost 程式可提升 USB 3.0 裝置的傳輸速度,並支援 USB 連接 SCSI 協定(UASP,USB Attached SCSI Protocol)。透過華碩 USB 3.0 Boost 程式,可輕 鬆提升您的 USB 3.0 裝置之傳輸速度。 執行華碩 USB 3.0 Boost 程式 若要執行 USB 3.0 Boost,請點選 AI Sutie 3 主選單右上方的 擇 USB 3.0 Boost。 圖示,然後選 使用華碩 USB 3.0 Boost 程式 點選以啟動 USB 裝置 的正常資料傳輸率 點選以選擇 USB 裝置 點選以啟動 USB 裝置的 UASP 或 Turbo 模式來獲 得更快的資料傳輸率 請確認連接在 USB 3.0 連接埠的 USB 3.0 裝置有支援 USB 3.0 Boost,請 參考 後面板連接埠 以了解更多說明。 • 請參考驅動程式 DVD 光碟中軟體手冊的說明,或是造訪華碩網站 http:// tw.asus.com 獲得軟體設定的詳細說明。 • 使用 USB 3.
Ai Charger+ Ai Charger+ 可以透過電腦的 USB 連接埠為 BC 1.1* 移動裝置進行快速充電,充電 速度是標準 USB 裝置**的 3 倍。 • * 請 諮詢您的 USB 裝置制造商了解 USB 裝置是否完全支援 BC 1.
EZ Update EZ Update 應用程式讓您可以輕鬆地自動更新主機板的軟體、驅動程式以及 BIOS 版本。 透過這個程式,您可以手動更新 BIOS,並選擇開機自我測試(POST)時想要用來 顯示的啟動圖示。 執行 EZ Update 若要執行 EZ Update,請點選螢幕右上方 工作列上的 EZ Update。 圖示,然後點選 AI Suite 3 主選單 EZ Update 主畫面 點選以自動更新主機板的驅動程式、軟體與韌體 點選以搜尋並選擇 BIOS 檔案 點選以選擇啟動圖示 點選以更新 BIOS 第四章 4-14 第四章:軟體支援
系統資訊 這個程式可以讓您獲得本主機板、處理器與記憶體設定的詳細資訊。 執行系統資訊 若要執行系統資訊,請點選螢幕右上方 工作列上的 System Information(系統資訊)。 圖示,然後點選 AI Suite 3 主選單 查看主機板資訊 從系統資訊主畫面,點選 MB(主機板) 標籤頁來查看主機板的相關資訊。 查看處理器資訊 第四章 從系統資訊主畫面,點選 CPU(處理器) 標籤頁來查看處理器的相關資訊。 華碩 CROSSBLADE RANGER 主機板使用手冊 4-15
查看 SPD 資訊 從系統資訊主畫面,點選 SPD 標籤頁來查看記憶體的相關資訊。 第四章 4-16 第四章:軟體支援
USB BIOS Flashback 精靈 USB BIOS Flashback 精靈可以查看並將最新版 BIOS 程式儲存至 USB 儲存裝置,配合 ASUS USB BIOS Flashback 的硬體特色,讓您不需重新啟動即可更新 BIOS 程式。 執行華碩 USB BIOS Flashback 程式 若要執行 USB BIOS Flashback,請點選 AI Sutie 3 主選單右上方的 後選擇 USB BIOS Flashback。 圖示,然 USB BIOS Flashback 只適用於特定的主機板型號。 使用 USB BIOS Flashback 程式 設定下載 BIOS 更新的排程 點選以確認是否有 BIOS 韌體更新可下載 點選以取消下 載的排程設定 點選以套用下 載的排程設定 設定下載 BIOS 更新的排程 1. 請於 Download Setting(下載設定) 中勾選 Schedule (days)(排程),並選擇下 次進行下載更新的天數。 第四章 2.
USB Charger+ USB Charger+ 用來快速充電您的便攜 USB 裝置,即使在電腦關機、睡眠狀態或休 眠狀態仍可進行充電。 在使用 USB Charger+ 之前,請先確認關閉在 BIOS 設定中 Advanced 模式 的 Advanced > APM > ErP Ready 的 Erp Ready 選項。 執行 USB Charger+ 若要執行 USB Charger+,請點選 AI Sutie 3 主選單上方的 USB Charger+。 圖示,然後選擇 使用 USB Charger+ 程式 點選以更 新列表 點選以應用 設定 點選您想要在系統關機時進 行充電的 USB 裝置類型 點選以取消 套用設定 請確認將您的 USB 裝置連接至支援本程式之 USB 連接埠。請參考 2.3.
推播資訊(Push Notice) 這個應用程式讓您可以將系統狀態的詳細資訊傳送至智慧型裝置,您也可以使用這 個程式傳送資訊至智慧型裝置。 使用這個應用程式之前,請先確認您的電腦與智慧型裝置已經完成配對。 請參考 配對電腦與智慧型裝置 一節的詳細資訊。 啟動電腦的推播資訊(Push Notice) 若要啟動推播資訊,請點選 AI Sutie 3 主選單右上方的 Notice。 圖示,然後選擇 Push 推播資訊(Push Notice)主畫面 點選或輕觸以啟動推播資訊(Push Notice) 勾選智慧 型裝置 點選以放棄設定 點選以套用設定 您也可以透過螢幕右上角的 Push Notice 捷徑來啟動推播資訊功能,請點 選 << 然後點選 ,再選擇 。 配對電腦與智慧型裝置 請依照以下步驟配對電腦與智慧型裝置: 來啟動推播資訊(Push Notice)。 1. 在智慧型裝置點選 第四章 Push Notice 2.
設定要發出警告的模式 本功能用來設定當電腦重新啟動、關機或進入睡眠模式時,傳送警示資訊至智慧型 裝置。 勾選這些項目來選擇 欲啟動警示的模式 勾選智慧 型裝置 設定日期與時 間來啟動模式 設定在模式啟動前 幾分鐘要傳送警示 輸入要傳送的資訊 設定電腦狀態警示 本功能用來將電腦上不正常的狀態,如:電壓、溫度和風扇設定等資訊傳送警示至 智慧型裝置。 勾選智慧 型裝置 勾選欲傳送至智 慧型裝置的項目 勾選本項目當元件回復正常狀 態時傳送警示至智慧型裝置 第四章 4-20 第四章:軟體支援
傳送資訊至智慧型裝置 本功能用來傳送資訊至智慧型裝置。 您也可以透過螢幕右上角的推播資訊(Push Notice)資訊捷徑來傳送資 訊,請點選 << 然後點選 ,再選擇 。 勾選智慧 型裝置 點選以傳送 資訊 點選以輸入資訊 在智慧型裝置查看電腦狀態 在智慧型裝置點選 以啟動推播資訊(Push Notice)。 Push Notice 點選以刪 除警示 第四章 點選以查看 警示模式 點選以查看 警示狀態 點選以查看傳 送過的資訊 點選以掃描 更多主機 華碩 CROSSBLADE RANGER 主機板使用手冊 4-21
4.
Equalizer switch(等化器開關) 點選以啟用這項功能,提供您依據自己的喜好調整等化器的參數值。 Equalizer advanced settings(等化器進階設定) 本項目只當 Equalizer switch 啟用會才會顯示,提供您設定等化器的設定 值。您可以手動設定或自訂偏好的設定或選擇已存在的預設等化器設定值。 Equalizer presets(預設等化器) 選擇目前或選定的預設等化器。 Bass Boost switch(重低音開關) 點選可以增強重低音效果,拖曳滑桿以調整音效的重低音效果。 Voice Clarity switch(語音清晰度開關) 啟用 Voice clarity 可以將人聲讀取更清晰,以獲得更好的對話/音效通訊質 量,或聆聽音樂時讓人聲表現更清晰。 Smart EQ (Smart Volume) switch(智慧 EQ 音場開關) 提供動態調整 EQ 可以讓人聽到更多的細節。 Virtual Surround switch(虛擬環繞音效開關) 本項目提供您開啟耳機的 7.
Sonic SenseAmp Sonic SenseAmp 是 ROG 獨家研發的技術,提供主機板內建音效的耳機擴大機 (AMP),具備三個 AMP 等級的調整器。可以檢測耳機的阻抗與調整對應至內建的 擴大機(AMP)。 Sonic SenseAmp 只支援於前面板連接使用。 當您將耳機插入耳機孔後,Sonic SenseAmp 會立即跳出交談視窗並顯示「Detecting headphone impedance」(檢測到耳機裝置)。 在檢測好耳機的阻抗後,Sonic SenseAmp 會跳出類似如下的視窗。 當調整檢測耳機的阻抗時,請參考下表有關 Sonic SenseAmp 的建議: 32 ohm Amplify Level 自動設定為 Performance 第四章 150 ohms Amplify Level 自動設定為 Powerful > 150 ohms Amplify Level 自動設定為 Extreme 其他裝置 4-24 其他插入的裝置則以其他插入裝置為準 第四章:軟體支援
在您關閉跳出視窗後,Sonic SenseAmp 會進入喇叭設定,並且顯示調整耳機的阻 抗。 點選以手動調整 擴大機等級 第四章 顯示您耳機的阻抗 華碩 CROSSBLADE RANGER 主機板使用手冊 4-25
Sonic SoundStage Sonic SoundStage 為採用硬體基礎的虛擬攝影棚完整解決方案,提供了四種遊戲預 設檔:FPS(第一人稱射擊)、Racing(賽車)、Combat(格鬥)與 Sport(運動)。 • 本項功能只適用於連接前面板連接耳機輸出。 • 您可以透過主機板上的 SoundStage 按鈕來啟用這項功能。請參考本 手冊關於 SoundStage 按鈕的說明。 點選四個遊戲預 設檔的任一設定 手動使用滑桿拖曳 以設定該項目 Crossing 移動滑桿來調整跨通道的混和量。 Revert 移動滑桿來還原至主音源。 Space 移動滑桿來調整和虛擬空間聲音。 第四章 Crossing gain 當 Crossing and Revert 啟用時,本項目才會顯示。移動滑桿來調整牆壁的硬 度。 4-26 第四章:軟體支援
DTS Connect DTS Connect 提供包含支援所有音效娛樂的格式,並採用 4、5.1 與 7.
4.
Audio Mode/Radar Selection menu(音效模式/雷達選項選單) 提供您設定增強音效。 點選以選擇想 要增強的音效 第四章 Audio Mode/Radar Selection 可以在遊戲進行中使用快捷鍵開啟,請參考 Controls(控制) 標籤頁以了解更多有關快捷鍵設定的說明。 華碩 CROSSBLADE RANGER 主機板使用手冊 4-29
4.
Network Monitor(網路監控) Top 5 application(前 5 個應用程式) 顯示目前使用量排名前 5 名消耗頻寬量的應用程式。 Application usage(應用程式使用狀況) 顯示目前使用的應用程式之個別的下載和上傳頻寬。 Total usage(總使用量) 第四章 顯示目前使用的應用程式的總下載和上傳頻寬量。 華碩 CROSSBLADE RANGER 主機板使用手冊 4-31
Bandwidth Test 你可以使用這項功能來測試網路服務提供商M(ISP)速度或在需要時,以手動方 式輸入想要的上傳/下載速度與應用其速度。 輸入上傳/下載速度 點選以進行速度測試 在手動輸入想要的連接速度或在 您執行速度測試後,點選應用 Using the Network Information(使用網路資訊) 顯示有關實體網路卡的相關資訊,如 speed(速度)、physical address(實體位址)、 IP address(IP 位址)、subnet mask(子網路遮罩)與 default gateway(預設閘道器) 第四章 4-32 第四章:軟體支援
4.9 KeyBot KeyBot是一個內建的微型處理器,可以瞬間將鍵盤升級。這項功能可以提供您設定 和指派巨集至鍵盤上指定的按鍵,便能同時執行特定或多項任務。並且還可以設定電 腦在 CPU Level Up、XMP 的喚醒功能,或直接喚醒 BIOS 模式。 請依照以下方式使用 KeyBot: 1. 按下主機板上的 KeyBot 按鈕。 當 KEYBOT_LED 燈號亮燈時,表示 KeyBot 功能已經開啟。 2. 將 USB 連接埠鍵盤插入支援 KeyBot 功能的 USB 連接埠。 請參考 後面板連接埠 或 USB BIOS Flashback 一節的說明,以了解更多 有關 KeyBot USB 連接埠的資訊。 3.
Function Keys(功能鍵) Shortcut(快捷鍵) 第四章 4-34 第四章:軟體支援
4.
增加與刪除介質檔案 勾選想要增加或刪除的檔案 點選以增加或建立新檔案夾 點選以增加選擇的檔案 點選以刪除選擇的檔案 點選以進行檔案的刪除或增加 點選以取消更改 此功能支援以下擴充名的檔案格式:.3g p、.m p4、.m4a、.a a c、.t s、.fla c、 .mp3、.mid、.xmf、.mxmf、.rttt、.rtx、.ota、.imy、.ogg、.mkv、.wav、.jpg、 .gif、.png、.bmp、.webp、.
4.
4.
刪除現有的 RAMDisk 磁碟 點選以刪除現有的 RAMDisk 磁碟. 點選以格式化現有 的 RAMDisk 磁碟.
同步備份檔案 在完成建立連接點(junction point)後,RAMDisk 會自動建立一個檔案夾在原始的 位置。使用 RAMDisk 以手動方式同步更新這些備份檔案。 點選 Synchronize(同 步)來更新檔案 第四章 4-40 第四章:軟體支援
4.
驗證和儲存您的 MemTweakIt 設定 請依照以下方式驗證與在在線儲存您的設定值: 1. 開啟 MemTweakIt 後點選 Validate(驗證)。 2. 在 Online Mode(線上模式),輸入您的華碩 Account(帳號)與 Password(密 碼)後,點選 Submit(提交)。 您的設定值將會顯示在 MemTweakIt webpage(MemTweakIt 網頁)上。 手動設定 validate(驗證)與儲存您的設定值: 1. 開啟 MemTweakIt 後,點選 Validate (驗證)。 2. 在 Manual Mode(選單模式)中,點 選 Save Configuration File(儲存設定 檔)。 3. 針對您的設定檔輸入一個檔案名,然 後點選 Save Vaildation File。 4. 點選 validation webpage。 5. 在 M emTweakI t - V a lida t io n F ile Upload 視窗中,輸入您的 account ID (帳號)與 password(密碼)。 6.
4.
第四章 4-44 第四章:軟體支援
5.1 5 第五章 RAID 支援 RAID 功能設定 本主機板內建 Intel® 晶片組,可以讓您透過 Intel® Rapid Storage 技術來設定 RAID 0、1、5 與 RAID 10 磁碟陣列。 若您想要使用設定有 RAID 磁碟陣列的硬碟來啟動系統,請在安裝作業系 統到選定的硬碟之前,先將應用程式 DVD 光碟內的 RAID 驅動程式檔案 複製至磁片中。請參考 5.2 建立一張搭載有 RAID 驅動程式的磁片 一節 的說明。 5.1.
5.1.2 安裝 Serial ATA(SATA)硬碟 本主機板支援 Serial ATA 硬碟。為了最佳的效能表現,當您要建立陣列模式設定 時,請盡可能採用具備相同型號與容量的硬碟。 第五章 請依照以下安裝方式來建構 SATA RAID 磁碟陣列。 1. 將硬碟安裝至硬碟槽中。 2. 安裝硬碟連接排線,將欲建構磁碟陣列的硬碟連接至主機板。 3. 將 SATA 電源線連接到每一部硬碟。 5.1.3 在 BIOS 程式中設定 RAID 在您開始建立陣列之前,您必須先在 BIOS 程式設定中設定對應的 RAID 選項。請 依照下列步驟進行操作︰ 1. 在啟動之後系統仍在記憶體的開機自我測試(Power-On Self Test,POST)時, 按下 按鍵進入 BIOS 設定程式。 2. 進入主選單(Main)後,選擇 Advanced > SATA Configuration 選項,然後按 鍵。 3. 將 OnChip SATA Type 選項設定為 [RAID]。 4.
5.1.4 AMD® Option ROM 應用程式 按照以下步驟進入 AMD® Option ROM 應用程式: 1. 啟動您的電腦。 第五章 2. 當系統執行開機自我測試程式(POST)時,按下 按鍵進入應用程式主 選單。 Option ROM Utility (c) 2009 Advanced Micro Devices, Inc. [ Main Menu ] View Drive Assignments .......[ 1 ] LD View / LD Define Menu ......[ 2 ] Delete LD Menu ...............[ 3 ] Controller Configuration ......[ 4 ] [ Keys Available ] Press 1..
建立 RAID 陣列 按照以下步驟建立 RAID 陣列: 1. 在主選單中按下 <2> 進入 LD View / LD Define Menu 功能。 2. 按下 + 出現以下畫面。 第五章 Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
刪除 RAID 陣列 第五章 當您要刪除 RAID 設定時請小心,儲存在硬碟中的資料會被全部刪除。 按照以下步驟刪除 RAID 陣列: 1. 在主選單中按下 <3> 進入 Delete LD 功能。 2. 選擇您要刪除的 RAID 項目,然後按下 或 + 。 Option ROM Utility (c) 2009 Advanced Micro Devices, Inc. LD No LD RAID Mode 1 [↑] Up [ Delete LD Menu ] RAID 0 [↓] Down Drv Capacity(GB) 2 Status xxxxxx Functional [ Keys Available ] [PaUp/PaDn] Switch page [Del/Alt+D] Delete LD 3. 畫面會跳出以下資訊: Press Ctrl-Y to delte the data in the disk! or press any other key to abort...
5.2 在安裝 Windows® 作業系統時安裝 RAID 驅動程 式 請依照下列步驟在 Windows® XP 安裝 RAID 驅動程式: 第五章 1. 當安裝作業系統時,系統會提示您按下 來安裝協力廠商的 SCSI 或 RAID 驅 動程式。 2. 按下 鍵並將存有 RAID 驅動程式的磁片/USB 隨身碟置入軟碟機/USB 連接 埠。 3. 當提示出現提醒您選擇要安裝的 SCSI adapter 驅動程式時,請選擇 RAID 驅動程 式檔案。 4. 請依照螢幕指示來完成驅動程式的安裝。 請依照下列步驟在 Windows® Vista 或更新版本作業系統中安裝 RAID 驅動程式: 1. 當安裝作業系統時,選擇 Load Driver。 2. 將搭載有 RAID 驅動程式的磁片/USB 隨身碟置入軟碟機/USB 連接埠,並點選 Browse。 3. 請選擇您的裝置後,選擇 Drivers > RAID,並選擇 RAID 驅動程式檔案再按下 OK。 4.
華碩的連絡資訊 華碩電腦公司 ASUSTeK COMPUTER INC.(台灣) 市場訊息 技術支援 地址: 台灣臺北市北投區立德路 15 號 電話: +886-2-2894-3447 傳真: +886-2-2890-7798 電子郵件: info@asus.com.tw 全球資訊網:http://tw.asus.com 電話: +886-2-2894-3447(0800-093456) 線上支援: http://www.asus.com/tw/support/ 華碩電腦公司 ASUSTeK COMPUTER INC.(亞太地區) 市場訊息 技術支援 地址: 台灣臺北市北投區立德路 15 號 電話: +886-2-2894-3447 傳真: +886-2-2890-7798 電子郵件: info@asus.com.tw 全球資訊網:http://tw.asus.com 電話: +86-21-38429911 傳真: +86-21-58668722, ext. 9101# 線上支援: http://www.asus.
(510)739-3777/(510)608-4555 800 Corporate Way, Fremont, CA 94539. Asus Computer International Date : Signature : Representative Person’s Name : Jul. 04, 2014 Steve Chang / President This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.