User's Manual

3-10
第三章：BIOS 程式設定
第三章
Primary Timings
DRAM CAS# Latency [Auto]
設定值有：[Auto] [5] – [16]
DRAM RAS# to CAS# Delay [Auto]
設定值有：[Auto] [2] – [19]
DRAM RAS# PRE Time [Auto]
設定值有：[Auto] [5] – [19]
DRAM RAS# ACT Time [Auto]
設定值有：[Auto] [8] – [42]
DRAM COMMAND Mode [Auto]
設定值有：[Auto] [1] – [2]
Secondary Timings
DRAM Row Cycle Time [Auto]
設定值有：[Auto] [10] – [58]
DRAM READ to PRE Time [Auto]
設定值有：[Auto] [4] – [12]
DRAM RAS# to RAS# Delay [Auto]
設定值有：[Auto] [1] – [9]
DRAM WRITE to READ Delay [Auto]
設定值有：[Auto] [4] – [12]
DRAM CAS# Write Latency [Auto]
設定值有：[Auto] [5] – [17]
DRAM WRITE Recovery Time [Auto]
設定值有：[Auto] [5 DRAM Clock] [6 DRAM Clock] [7 DRAM Clock] [8 DRAM
Clock] [10 DRAM Clock] [12 DRAM Clock] [14 DRAM Clock] [16 DRAM Clock]
[18 DRAM Clock]
DRAM FOUR ACT WIN Time [Auto]
設定值有：[Auto] [6] [8] [10] [12] [14] – [44]
DRAM REF Cycle Time [Auto]
設定值有：[Auto] [90ns] [110ns] [160ns] [300ns] [350ns]
Third Timings
CKE drive strength [Auto]
設定值有：[Auto] [1.00x] [1.25x] [1.50x] [2.00x]
CS/ODT drive strength [Auto]
設定值有：[Auto] [1.00x] [1.25x] [1.50x] [2.00x]