Specifications
1-32
Chapter 1: Product introduction
Chapter 1
Code Description
F0 Recovery condition triggered by rmware (Auto recovery)
F1 Recovery condition triggered by user (Forced recovery)
F2 Recovery process started
F3 Recovery rmware image is found
F4 Recovery rmware image is loaded
F5 – F7 Reserved for future AMI progress codes
F8 Recovery PPI is not available
F9
Recovery capsule is not found
FA
Invalid recovery capsule
FB – FF
Reserved for future AMI error codes
60
DXE Core is started
61
NVRAM initialization
62
Installation of the PCH Runtime Services
63 – 67
CPU DXE initialization is started
68
PCI host bridge initialization
69
System Agent DXE initialization is started
6A
System Agent DXE SMM initialization is started
6B – 6F
System Agent DXE initialization (System Agent module specic)
70
PCH DXE initialization is started
71
PCH DXE SMM initialization is started
72
PCH devices initialization
73 – 77
PCH DXE Initialization (PCH module specic)
78
ACPI module initialization
79
CSM initialization
7A – 7F
Reserved for future AMI DXE codes
90
Boot Device Selection (BDS) phase is started
91
Driver connecting is started
92
PCI Bus initialization is started
93
PCI Bus Hot Plug Controller Initialization
94
PCI Bus Enumeration
95
PCI Bus Request Resources
(continued on the next page)
Q-Code table