User Guide

18 ASUS CUA User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see Advanced Menu, BIOS).
IMPORTANT: In JumperFree™ mode, all DIP switches (DSW) must be set to
OFF.
Setting JEN
Enable (JumperFree) [2-3] (default)
Disable (Jumper) [1-2]
CUA JumperFree™ Mode Setting
CUA
®
JEN
JumperFree
(Default)
Jumper
2
3
12
OFF
DSW1
ON
123
45
678
Motherboard Feature Settings (DSW)
Besides jumper settings, some of the motherboard’s onboard functions are adjusted
through the DIP switches. The white block represents the switch’s position. The
example below shows all the switches in the OFF position.
CUA DIP Switches
CUA
®
1: Frequency Selection
2: Frequency Selection
3: Frequency Selection
4: Frequency Selection
5: Frequency Multiple
6: Frequency Multiple
7: Frequency Multiple
8: Frequency Multiple
OFF
DSW1
ON
123
45
678